util-linux/po/cs.po

10131 lines
265 KiB
Plaintext

# Czech translation of util-linux.
# Jiøí Pavlovský <pavlovsk@ff.cuni.cz>, 1999 - 2001.
#
msgid ""
msgstr ""
"Project-Id-Version: util-linux-2.11d\n"
"POT-Creation-Date: 2004-12-05 20:08+0100\n"
"PO-Revision-Date: 2001-05-30 15:11+0200\n"
"Last-Translator: Jiøí Pavlovský <pavlovsk@ff.cuni.cz>\n"
"Language-Team: Czech <cs@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-2\n"
"Content-Transfer-Encoding: 8bit\n"
#: disk-utils/blockdev.c:62
msgid "set read-only"
msgstr "nastaví pouze pro ètení"
#: disk-utils/blockdev.c:63
msgid "set read-write"
msgstr "nastaví pro ètení/zápis"
#: disk-utils/blockdev.c:66
msgid "get read-only"
msgstr "zjistí zda je zakázán zápis"
#: disk-utils/blockdev.c:69
msgid "get sectorsize"
msgstr "zjistí velikost sektoru"
#: disk-utils/blockdev.c:72
#, fuzzy
msgid "get blocksize"
msgstr "zjistí velikost"
#: disk-utils/blockdev.c:75
#, fuzzy
msgid "set blocksize"
msgstr "zjistí velikost"
#: disk-utils/blockdev.c:78
msgid "get 32-bit sector count"
msgstr ""
#: disk-utils/blockdev.c:81
#, fuzzy
msgid "get size in bytes"
msgstr "zjistí velikost"
#: disk-utils/blockdev.c:84
msgid "set readahead"
msgstr "nastaví dopøedné ètení sektorù"
#: disk-utils/blockdev.c:87
msgid "get readahead"
msgstr "zjistí nastavení dopøedného ètení sektorù"
#: disk-utils/blockdev.c:90
msgid "flush buffers"
msgstr "vyprázdnit buffery"
#: disk-utils/blockdev.c:94
msgid "reread partition table"
msgstr "naète znovu tabulku rozdìlení disku"
#: disk-utils/blockdev.c:103
#, fuzzy
msgid "Usage:\n"
msgstr "Pou¾ití:"
#: disk-utils/blockdev.c:105
#, c-format
msgid " %s --report [devices]\n"
msgstr ""
#: disk-utils/blockdev.c:106
#, fuzzy, c-format
msgid " %s [-v|-q] commands devices\n"
msgstr "Pou¾ití: %s [-V] [-v|-q] pøepínaèe zaøízení\n"
#: disk-utils/blockdev.c:107
msgid "Available commands:\n"
msgstr "Dostupné pøíkazy:\n"
#: disk-utils/blockdev.c:254
#, c-format
msgid "%s: Unknown command: %s\n"
msgstr "%s: neznámý pøíkaz %s\n"
#: disk-utils/blockdev.c:266 disk-utils/blockdev.c:275
#, c-format
msgid "%s requires an argument\n"
msgstr "pøepínaè %s vy¾aduje argument\n"
#: disk-utils/blockdev.c:323
#, c-format
msgid "%s succeeded.\n"
msgstr ""
#: disk-utils/blockdev.c:341 disk-utils/blockdev.c:367
#, fuzzy, c-format
msgid "%s: cannot open %s\n"
msgstr "%s: %s nelze otevøít: %s\n"
#: disk-utils/blockdev.c:384
#, fuzzy, c-format
msgid "%s: ioctl error on %s\n"
msgstr "%s: chyba zápisu na %s\n"
#: disk-utils/blockdev.c:391
msgid "RO RA SSZ BSZ StartSec Size Device\n"
msgstr ""
#: disk-utils/elvtune.c:50 disk-utils/setfdprm.c:100
msgid "usage:\n"
msgstr "Pou¾ití:\n"
#: disk-utils/fdformat.c:31
msgid "Formatting ... "
msgstr "Formátuji ... "
#: disk-utils/fdformat.c:49 disk-utils/fdformat.c:84
msgid "done\n"
msgstr "hotovo\n"
#: disk-utils/fdformat.c:60
msgid "Verifying ... "
msgstr "Ovìøuji ... "
#: disk-utils/fdformat.c:71
msgid "Read: "
msgstr "Chyba pøi ètení: "
#: disk-utils/fdformat.c:73
#, c-format
msgid "Problem reading cylinder %d, expected %d, read %d\n"
msgstr "Chyba pøi ètení cylindru %d, pøedpoklad %d, pøeèteno %d\n"
#: disk-utils/fdformat.c:79
#, c-format
msgid ""
"bad data in cyl %d\n"
"Continuing ... "
msgstr ""
"chybná data v cylindru %d\n"
"Pokraèuji ... "
#: disk-utils/fdformat.c:94
#, c-format
msgid "usage: %s [ -n ] device\n"
msgstr "Pou¾ití: %s [ -n ] zaøízení\n"
#: disk-utils/fdformat.c:116 disk-utils/fsck.minix.c:1249
#: disk-utils/isosize.c:179 disk-utils/mkfs.bfs.c:119 disk-utils/mkfs.c:55
#: disk-utils/mkfs.cramfs.c:778 disk-utils/mkfs.minix.c:626
#: disk-utils/mkswap.c:462 disk-utils/setfdprm.c:128 hwclock/hwclock.c:1175
#: misc-utils/cal.c:313 misc-utils/ddate.c:180 misc-utils/kill.c:189
#: misc-utils/rename.c:79 misc-utils/script.c:143
#, c-format
msgid "%s from %s\n"
msgstr "%s na %s\n"
#: disk-utils/fdformat.c:130
#, fuzzy, c-format
msgid "%s: not a block device\n"
msgstr "%s není zaøízením pru¾ného disku\n"
#: disk-utils/fdformat.c:140
msgid "Could not determine current format type"
msgstr "Typ formátu nelze zjistit"
#: disk-utils/fdformat.c:141
#, c-format
msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n"
msgstr "stran: %s, stop: %d, sekt/stopu %d. Celková kapacita %d kB.\n"
#: disk-utils/fdformat.c:142
msgid "Double"
msgstr "2"
#: disk-utils/fdformat.c:142
msgid "Single"
msgstr "1"
#: disk-utils/fsck.cramfs.c:98
#, c-format
msgid ""
"usage: %s [-hv] [-x dir] file\n"
" -h print this help\n"
" -x dir extract into dir\n"
" -v be more verbose\n"
" file file to test\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:191
#, c-format
msgid "%s: error %d while decompressing! %p(%d)\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:243
#, fuzzy, c-format
msgid "%s: size error in symlink `%s'\n"
msgstr "%s: chyba zápisu na %s\n"
#: disk-utils/fsck.cramfs.c:258 disk-utils/fsck.cramfs.c:328
#, c-format
msgid " uncompressing block at %ld to %ld (%ld)\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:287
#, c-format
msgid "%s: bogus mode on `%s' (%o)\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:319
#, fuzzy, c-format
msgid " hole at %ld (%d)\n"
msgstr "mìlo by být (%d, %d, %d)\n"
#: disk-utils/fsck.cramfs.c:337
#, c-format
msgid "%s: Non-block (%ld) bytes\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:343
#, c-format
msgid "%s: Non-size (%ld vs %ld) bytes\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:392
#, c-format
msgid "%s: invalid cramfs--bad path length\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:472
#, fuzzy, c-format
msgid "%s: compiled without -x support\n"
msgstr "pøi pøekladu %s nebyla zvolena podpora minix v2\n"
#: disk-utils/fsck.cramfs.c:498
#, c-format
msgid "%s: warning--unable to determine filesystem size \n"
msgstr ""
#: disk-utils/fsck.cramfs.c:508
#, fuzzy, c-format
msgid "%s is not a block device or file\n"
msgstr "%s není zaøízením pru¾ného disku\n"
#: disk-utils/fsck.cramfs.c:514 disk-utils/fsck.cramfs.c:549
#, c-format
msgid "%s: invalid cramfs--file length too short\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:541
#, c-format
msgid "%s: invalid cramfs--wrong magic\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:554
#, c-format
msgid "%s: warning--file length too long, padded image?\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:564
#, fuzzy, c-format
msgid "%s: invalid cramfs--crc error\n"
msgstr "%s: chyba pøi analýze pøepínaèù\n"
#: disk-utils/fsck.cramfs.c:570
#, c-format
msgid "%s: warning--old cramfs image, no CRC\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:592
#, c-format
msgid "%s: invalid cramfs--bad superblock\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:608
#, c-format
msgid "%s: invalid cramfs--directory data end (%ld) != file data start (%ld)\n"
msgstr ""
#: disk-utils/fsck.cramfs.c:616
#, c-format
msgid "%s: invalid cramfs--invalid file data offset\n"
msgstr ""
#: disk-utils/fsck.minix.c:186
#, c-format
msgid "Usage: %s [-larvsmf] /dev/name\n"
msgstr "Pou¾ití: %s [ -larvsmf ] název zaøízení\n"
#: disk-utils/fsck.minix.c:293
#, c-format
msgid "%s is mounted.\t "
msgstr "%s je ji¾ pøipojeno.\t"
#: disk-utils/fsck.minix.c:295
msgid "Do you really want to continue"
msgstr "Chcete opravdu pokraèovat"
#: disk-utils/fsck.minix.c:299
msgid "check aborted.\n"
msgstr "prohlídka ukonèena.\n"
#: disk-utils/fsck.minix.c:318 disk-utils/fsck.minix.c:341
#, fuzzy, c-format
msgid "Zone nr < FIRSTZONE in file `%s'."
msgstr "èíslo Zóny < FIRSTZONE v souboru `%s'."
#: disk-utils/fsck.minix.c:322 disk-utils/fsck.minix.c:345
#, fuzzy, c-format
msgid "Zone nr >= ZONES in file `%s'."
msgstr "èíslo Zóny >= poèet ZÓN v souboru `%s'."
#: disk-utils/fsck.minix.c:327 disk-utils/fsck.minix.c:350
msgid "Remove block"
msgstr "Odstranit blok"
#: disk-utils/fsck.minix.c:368
#, fuzzy, c-format
msgid "Read error: unable to seek to block in file '%s'\n"
msgstr "Chyba pøi ètení: nelze posunout ukazovátko na blok v souboru '"
#: disk-utils/fsck.minix.c:374
#, fuzzy, c-format
msgid "Read error: bad block in file '%s'\n"
msgstr "Chyba pøi ètení: chybný blok v souboru '"
#: disk-utils/fsck.minix.c:389
msgid ""
"Internal error: trying to write bad block\n"
"Write request ignored\n"
msgstr ""
"Vnitøní chyba: pokus o zápis chybného bloku.\n"
"®ádost o zápis ignorována.\n"
#: disk-utils/fsck.minix.c:395 disk-utils/mkfs.minix.c:267
msgid "seek failed in write_block"
msgstr "chyba pøi posunu ukazovátka ve write_block"
#: disk-utils/fsck.minix.c:398
#, fuzzy, c-format
msgid "Write error: bad block in file '%s'\n"
msgstr "Chyba pøi zápisu: chybný blok v souboru '"
#: disk-utils/fsck.minix.c:514
msgid "seek failed in write_super_block"
msgstr "chyba pøi posunu ukazovátka ve write_super_block"
#: disk-utils/fsck.minix.c:516 disk-utils/mkfs.minix.c:254
msgid "unable to write super-block"
msgstr "superblok nelze zapsat"
#: disk-utils/fsck.minix.c:526
msgid "Unable to write inode map"
msgstr "mapu i-uzlù nelze zapsat"
#: disk-utils/fsck.minix.c:528
msgid "Unable to write zone map"
msgstr "mapu zón nelze zapsat"
#: disk-utils/fsck.minix.c:530
msgid "Unable to write inodes"
msgstr "i-uzly nelze zapsat"
#: disk-utils/fsck.minix.c:557
msgid "seek failed"
msgstr "chyba pøi posunu ukazovátka"
#: disk-utils/fsck.minix.c:559
msgid "unable to read super block"
msgstr "superblok nelze èíst"
#: disk-utils/fsck.minix.c:577
msgid "bad magic number in super-block"
msgstr "superblok obsahuje chybné magické èíslo"
#: disk-utils/fsck.minix.c:579
msgid "Only 1k blocks/zones supported"
msgstr "podporovány jsou pouze 1kilobajtové bloky/zóny"
#: disk-utils/fsck.minix.c:581
msgid "bad s_imap_blocks field in super-block"
msgstr "superblok obsahuje chybnou polo¾ku s_imap_blocks"
#: disk-utils/fsck.minix.c:583
msgid "bad s_zmap_blocks field in super-block"
msgstr "superblok obsahuje chybnou polo¾ku s_zmap_blocks"
#: disk-utils/fsck.minix.c:590
msgid "Unable to allocate buffer for inode map"
msgstr "buffer pro mapu i-uzlù nelze alokovat"
#: disk-utils/fsck.minix.c:598
msgid "Unable to allocate buffer for inodes"
msgstr "buffer pro i-uzly nelze alokovat"
#: disk-utils/fsck.minix.c:601
msgid "Unable to allocate buffer for inode count"
msgstr "buffer pro poèítadlo i-uzlù nelze alokovat"
#: disk-utils/fsck.minix.c:604
msgid "Unable to allocate buffer for zone count"
msgstr "buffer pro poèítadlo zón nelze alokovat"
#: disk-utils/fsck.minix.c:606
msgid "Unable to read inode map"
msgstr "mapu i-uzlù nelze èíst"
#: disk-utils/fsck.minix.c:608
msgid "Unable to read zone map"
msgstr "mapu zón nelze èíst"
#: disk-utils/fsck.minix.c:610
msgid "Unable to read inodes"
msgstr "i-uzly nelze èíst"
#: disk-utils/fsck.minix.c:612
msgid "Warning: Firstzone != Norm_firstzone\n"
msgstr "Varování: Firstzone != Norm_firstzone\n"
#: disk-utils/fsck.minix.c:617 disk-utils/mkfs.minix.c:508
#, c-format
msgid "%ld inodes\n"
msgstr "i-uzlù: %ld\n"
#: disk-utils/fsck.minix.c:618 disk-utils/mkfs.minix.c:509
#, c-format
msgid "%ld blocks\n"
msgstr "blokù: %ld\n"
#: disk-utils/fsck.minix.c:619 disk-utils/mkfs.minix.c:510
#, c-format
msgid "Firstdatazone=%ld (%ld)\n"
msgstr "Firstdatazone=%ld (%ld)\n"
#: disk-utils/fsck.minix.c:620 disk-utils/mkfs.minix.c:511
#, c-format
msgid "Zonesize=%d\n"
msgstr "Velikost zóny=%d\n"
#: disk-utils/fsck.minix.c:621
#, c-format
msgid "Maxsize=%ld\n"
msgstr "Maxvelikost=%ld\n"
#: disk-utils/fsck.minix.c:622
#, c-format
msgid "Filesystem state=%d\n"
msgstr "Stav systému souborù=%d\n"
#: disk-utils/fsck.minix.c:623
#, c-format
msgid ""
"namelen=%d\n"
"\n"
msgstr "namelen=%d\n"
#: disk-utils/fsck.minix.c:638 disk-utils/fsck.minix.c:689
#, fuzzy, c-format
msgid "Inode %d marked unused, but used for file '%s'\n"
msgstr "I-uzel %d je oznaèen jako nepou¾ívaný, ale je pou¾it pro soubor '"
#: disk-utils/fsck.minix.c:642 disk-utils/fsck.minix.c:693
msgid "Mark in use"
msgstr "Oznaèen jako pou¾ívaný"
#: disk-utils/fsck.minix.c:664 disk-utils/fsck.minix.c:713
#, fuzzy, c-format
msgid "The file `%s' has mode %05o\n"
msgstr " mód je %05o\n"
#: disk-utils/fsck.minix.c:671 disk-utils/fsck.minix.c:719
msgid "Warning: inode count too big.\n"
msgstr "Varování: poèet i-uzlù je pøíli¹ veliký.\n"
#: disk-utils/fsck.minix.c:731
msgid "root inode isn't a directory"
msgstr "root i-uzel není adresáøem"
#: disk-utils/fsck.minix.c:753 disk-utils/fsck.minix.c:786
#, fuzzy, c-format
msgid "Block has been used before. Now in file `%s'."
msgstr "Blok byl pou¾it ji¾ pøedtím. Nyní v souboru `%s'."
#: disk-utils/fsck.minix.c:755 disk-utils/fsck.minix.c:788
#: disk-utils/fsck.minix.c:1111 disk-utils/fsck.minix.c:1120
#: disk-utils/fsck.minix.c:1166 disk-utils/fsck.minix.c:1175
msgid "Clear"
msgstr "Smazat"
#: disk-utils/fsck.minix.c:765 disk-utils/fsck.minix.c:798
#, fuzzy, c-format
msgid "Block %d in file `%s' is marked not in use."
msgstr "Blok %d v souboru %s' je oznaèen jako nepou¾ívaný."
#: disk-utils/fsck.minix.c:767 disk-utils/fsck.minix.c:800
msgid "Correct"
msgstr "Opravit"
#: disk-utils/fsck.minix.c:939 disk-utils/fsck.minix.c:1006
#, fuzzy, c-format
msgid "The directory '%s' contains a bad inode number for file '%.*s'."
msgstr "Adresáø '%s' obsahuje pro soubor '%.*s' chybné èíslo i-uzlu."
#: disk-utils/fsck.minix.c:942 disk-utils/fsck.minix.c:1009
msgid " Remove"
msgstr " Odstranit"
#: disk-utils/fsck.minix.c:956
#, fuzzy, c-format
msgid "`%s': bad directory: '.' isn't first\n"
msgstr ": chybný adresáø: '.' není první\n"
#: disk-utils/fsck.minix.c:964
#, fuzzy, c-format
msgid "`%s': bad directory: '..' isn't second\n"
msgstr ": chybný adresáø: '..' není druhý\n"
#: disk-utils/fsck.minix.c:1023
#, fuzzy, c-format
msgid "%s: bad directory: '.' isn't first\n"
msgstr ": chybný adresáø: '.' není první\n"
#: disk-utils/fsck.minix.c:1032
#, fuzzy, c-format
msgid "%s: bad directory: '..' isn't second\n"
msgstr ": chybný adresáø: '..' není druhý\n"
#: disk-utils/fsck.minix.c:1066
msgid "internal error"
msgstr "vnitøní chyba"
#: disk-utils/fsck.minix.c:1069 disk-utils/fsck.minix.c:1087
#, fuzzy, c-format
msgid "%s: bad directory: size < 32"
msgstr ": chybný adresáø: velikost < 32"
#: disk-utils/fsck.minix.c:1100
msgid "seek failed in bad_zone"
msgstr "chyba pøi posunu ukazovátka v bad_zone"
#: disk-utils/fsck.minix.c:1110 disk-utils/fsck.minix.c:1165
#, c-format
msgid "Inode %d mode not cleared."
msgstr "Mód I-uzlu %d není smazán."
#: disk-utils/fsck.minix.c:1119 disk-utils/fsck.minix.c:1174
#, c-format
msgid "Inode %d not used, marked used in the bitmap."
msgstr "I-uzel %d není pou¾íván a v bitmapì oznaèen jako pou¾ívaný."
#: disk-utils/fsck.minix.c:1125 disk-utils/fsck.minix.c:1180
#, c-format
msgid "Inode %d used, marked unused in the bitmap."
msgstr "I-uzel %d je pou¾íván a v bitmapì oznaèen jako nepou¾ívaný."
#: disk-utils/fsck.minix.c:1131 disk-utils/fsck.minix.c:1185
#, c-format
msgid "Inode %d (mode = %07o), i_nlinks=%d, counted=%d."
msgstr "I-uzel %d (mode = %07o), i_nlinks=%d, napoèítáno=%d."
#: disk-utils/fsck.minix.c:1133 disk-utils/fsck.minix.c:1187
msgid "Set i_nlinks to count"
msgstr "Nastavit i_nlinks na poèet"
#: disk-utils/fsck.minix.c:1145 disk-utils/fsck.minix.c:1199
#, c-format
msgid "Zone %d: marked in use, no file uses it."
msgstr "Zóna %d je oznaèena jako pou¾ívaná a ¾ádné soubory ji nepou¾ívají."
#: disk-utils/fsck.minix.c:1146 disk-utils/fsck.minix.c:1201
msgid "Unmark"
msgstr "Odznaèit"
#: disk-utils/fsck.minix.c:1151 disk-utils/fsck.minix.c:1206
#, fuzzy, c-format
msgid "Zone %d: in use, counted=%d\n"
msgstr "Zóna %d: %spou¾ívaná, napoèítáno=%d\n"
#: disk-utils/fsck.minix.c:1154 disk-utils/fsck.minix.c:1209
#, fuzzy, c-format
msgid "Zone %d: not in use, counted=%d\n"
msgstr "Zóna %d: %spou¾ívaná, napoèítáno=%d\n"
#: disk-utils/fsck.minix.c:1181
msgid "Set"
msgstr "Nastavit"
#: disk-utils/fsck.minix.c:1254 disk-utils/mkfs.minix.c:631
#: disk-utils/mkfs.minix.c:633
msgid "bad inode size"
msgstr "chybná velikost i-uzlu"
#: disk-utils/fsck.minix.c:1256
msgid "bad v2 inode size"
msgstr "chybná velikost v2 i-uzlu"
#: disk-utils/fsck.minix.c:1282
msgid "need terminal for interactive repairs"
msgstr "opravy s úèastí u¾ivatele vy¾adují terminál"
#: disk-utils/fsck.minix.c:1286
#, c-format
msgid "unable to open '%s'"
msgstr "'%s' nelze otevøít"
#: disk-utils/fsck.minix.c:1301
#, c-format
msgid "%s is clean, no check.\n"
msgstr "%s je 'èisté', ovìøování vynecháno.\n"
#: disk-utils/fsck.minix.c:1305
#, c-format
msgid "Forcing filesystem check on %s.\n"
msgstr "Kontrola systému souborù na %s vynucena.\n"
#: disk-utils/fsck.minix.c:1307
#, c-format
msgid "Filesystem on %s is dirty, needs checking.\n"
msgstr "Systém souborù na %s je '¹pinavý', je tøeba jej zkontrolovat.\n"
#: disk-utils/fsck.minix.c:1333
#, c-format
msgid ""
"\n"
"%6ld inodes used (%ld%%)\n"
msgstr ""
"\n"
"pou¾ívaných i-uzlù: %6ld (%ld%%)\n"
#: disk-utils/fsck.minix.c:1338
#, c-format
msgid "%6ld zones used (%ld%%)\n"
msgstr "pou¾ívaných zón: %6ld (%ld%%)\n"
#: disk-utils/fsck.minix.c:1340
#, c-format
msgid ""
"\n"
"%6d regular files\n"
"%6d directories\n"
"%6d character device files\n"
"%6d block device files\n"
"%6d links\n"
"%6d symbolic links\n"
"------\n"
"%6d files\n"
msgstr ""
"\n"
" obyèejných souborù: %6d\n"
" adresáøù: %6d\n"
" znakových zaøízení: %6d\n"
" blokových zaøízení: %6d\n"
" odkazù: %6d\n"
" symbolických odkazù: %6d\n"
"------\n"
"souborù: %6d\n"
#: disk-utils/fsck.minix.c:1353
msgid ""
"----------------------------\n"
"FILE SYSTEM HAS BEEN CHANGED\n"
"----------------------------\n"
msgstr ""
"----------------------------\n"
"SYSTÉM SOUBORÙ BYL ZMÌNÌN \n"
"----------------------------\n"
#: disk-utils/isosize.c:129
#, c-format
msgid "%s: failed to open: %s\n"
msgstr "%s: %s nelze otevøít\n"
#: disk-utils/isosize.c:135
#, c-format
msgid "%s: seek error on %s\n"
msgstr "%s: chyba zápisu na %s\n"
#: disk-utils/isosize.c:141
#, c-format
msgid "%s: read error on %s\n"
msgstr "%s: chyba zápisu na %s\n"
#: disk-utils/isosize.c:150
#, c-format
msgid "sector count: %d, sector size: %d\n"
msgstr "poèet sektorù: %d, velikost sektoru: %d\n"
#: disk-utils/isosize.c:198
#, c-format
msgid "%s: option parse error\n"
msgstr "%s: chyba pøi analýze pøepínaèù\n"
#: disk-utils/isosize.c:206
#, c-format
msgid "Usage: %s [-x] [-d <num>] iso9660-image\n"
msgstr "Pou¾ití: %s [-x] [-d <num>] iso9660-obraz\n"
#: disk-utils/mkfs.bfs.c:88
#, c-format
msgid ""
"Usage: %s [-v] [-N nr-of-inodes] [-V volume-name]\n"
" [-F fsname] device [block-count]\n"
msgstr ""
"Pou¾ití: %s [-v] [-N poèet iuzlù] [-V název svazku]\n"
" [-F název ss] zaøízení [poèet blokù]\n"
#: disk-utils/mkfs.bfs.c:135
msgid "volume name too long"
msgstr "název svazku je pøíli¹ dlouhý"
#: disk-utils/mkfs.bfs.c:142
msgid "fsname name too long"
msgstr "název ss je pøíli¹ dlouhý"
#: disk-utils/mkfs.bfs.c:167
#, c-format
msgid "cannot stat device %s"
msgstr "volání stat pro zaøízení %s selhalo"
#: disk-utils/mkfs.bfs.c:171
#, c-format
msgid "%s is not a block special device"
msgstr "%s není blokovým zaøízením"
#: disk-utils/mkfs.bfs.c:176
#, c-format
msgid "cannot open %s"
msgstr "%s nelze otevøít"
#: disk-utils/mkfs.bfs.c:187
#, c-format
msgid "cannot get size of %s"
msgstr "nelze zjistit velikost %s"
#: disk-utils/mkfs.bfs.c:192
#, c-format
msgid "blocks argument too large, max is %lu"
msgstr "zadán pøíli¹ veliký poèet blokù, maximum je %lu"
#: disk-utils/mkfs.bfs.c:207
msgid "too many inodes - max is 512"
msgstr "pøíli¹ mnoho iuzlù - maximum je 512"
#: disk-utils/mkfs.bfs.c:216
#, c-format
msgid "not enough space, need at least %lu blocks"
msgstr "nedostatek místa, minimální potøebný poèet blokù: %lu"
#: disk-utils/mkfs.bfs.c:228 fdisk/fdisk.c:2224
#, c-format
msgid "Device: %s\n"
msgstr "Zaøízení: %s\n"
#: disk-utils/mkfs.bfs.c:229
#, c-format
msgid "Volume: <%-6s>\n"
msgstr "Svazek: <%-6s>\n"
#: disk-utils/mkfs.bfs.c:230
#, c-format
msgid "FSname: <%-6s>\n"
msgstr "NázevSS: <%-6s>\n"
#: disk-utils/mkfs.bfs.c:231
#, c-format
msgid "BlockSize: %d\n"
msgstr "VelikostBloku: %d\n"
#: disk-utils/mkfs.bfs.c:233
#, c-format
msgid "Inodes: %d (in 1 block)\n"
msgstr "Poèet iuzlù: %d (v 1 bloku)\n"
#: disk-utils/mkfs.bfs.c:236
#, c-format
msgid "Inodes: %d (in %ld blocks)\n"
msgstr "Poèet iuzlù: %d (v %ld blocích)\n"
#: disk-utils/mkfs.bfs.c:238
#, c-format
msgid "Blocks: %ld\n"
msgstr "Poèet blokù: %ld\n"
#: disk-utils/mkfs.bfs.c:239
#, c-format
msgid "Inode end: %d, Data end: %d\n"
msgstr "Konec iuzlù: %d, Konec dat: %d\n"
#: disk-utils/mkfs.bfs.c:244
msgid "error writing superblock"
msgstr "chyba pøi zápisu superbloku"
#: disk-utils/mkfs.bfs.c:264
msgid "error writing root inode"
msgstr "chyba pøi zápisu koøenového iuzlu"
#: disk-utils/mkfs.bfs.c:269
msgid "error writing inode"
msgstr "chyba pøi zápisu iuzlu"
#: disk-utils/mkfs.bfs.c:272
msgid "seek error"
msgstr "volání seek selhalo"
#: disk-utils/mkfs.bfs.c:278
msgid "error writing . entry"
msgstr "chyba pøi zápisu . polo¾ky"
#: disk-utils/mkfs.bfs.c:282
msgid "error writing .. entry"
msgstr "chyba pøi zápisu .. polo¾ky"
#: disk-utils/mkfs.bfs.c:286
#, c-format
msgid "error closing %s"
msgstr "Chyba pøi zavírání %s"
#: disk-utils/mkfs.c:76
msgid "Usage: mkfs [-V] [-t fstype] [fs-options] device [size]\n"
msgstr "Pou¾ití: mkfs [-V] [-t sstyp] [ss-volby] zaøízení [velikost]\n"
#: disk-utils/mkfs.c:90 fdisk/cfdisk.c:345 getopt/getopt.c:89
#: getopt/getopt.c:99 login-utils/wall.c:237
#, c-format
msgid "%s: Out of memory!\n"
msgstr "%s: Nedostatek pamìti!\n"
#: disk-utils/mkfs.c:99
#, c-format
msgid "mkfs version %s (%s)\n"
msgstr "mkfs verze %s (%s)\n"
#: disk-utils/mkfs.cramfs.c:124
#, c-format
msgid ""
"usage: %s [-v] [-b blksz] [-e edition] [-i file] [-n name] dirname outfile\n"
" -h print this help\n"
" -v be verbose\n"
" -E make all warnings errors (non-zero exit status)\n"
" -b blksz use this blocksize, must equal page size\n"
" -e edition set edition number (part of fsid)\n"
" -i file insert a file image into the filesystem (requires >= 2.4.0)\n"
" -n name set name of cramfs filesystem\n"
" -p pad by %d bytes for boot code\n"
" -s sort directory entries (old option, ignored)\n"
" -z make explicit holes (requires >= 2.3.39)\n"
" dirname root of the filesystem to be compressed\n"
" outfile output file\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:335
#, c-format
msgid ""
"Very long (%u bytes) filename `%s' found.\n"
" Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting.\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:463
msgid "filesystem too big. Exiting.\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:514
msgid ""
"Exceeded MAXENTRIES. Raise this value in mkcramfs.c and recompile. "
"Exiting.\n"
msgstr ""
#. (I don't think this can happen with zlib.)
#: disk-utils/mkfs.cramfs.c:622
#, c-format
msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:641
#, c-format
msgid "%6.2f%% (%+d bytes)\t%s\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:819
#, c-format
msgid ""
"warning: guestimate of required size (upper bound) is %LdMB, but maximum "
"image size is %uMB. We might die prematurely.\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:860
#, fuzzy, c-format
msgid "Including: %s\n"
msgstr "Chybné id: %s\n"
#: disk-utils/mkfs.cramfs.c:866
#, c-format
msgid "Directory data: %d bytes\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:874
#, c-format
msgid "Everything: %d kilobytes\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:879
#, fuzzy, c-format
msgid "Super block: %d bytes\n"
msgstr "pou¾itý prostor (v bajtech) = %d\n"
#: disk-utils/mkfs.cramfs.c:886
#, c-format
msgid "CRC: %x\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:891
#, c-format
msgid "not enough space allocated for ROM image (%Ld allocated, %d used)\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:903
#, c-format
msgid "ROM image write failed (%d %d)\n"
msgstr ""
#. (These warnings used to come at the start, but they scroll off the
#. screen too quickly.)
#. (can't happen when reading from ext2fs)
#. bytes, not chars: think UTF8.
#: disk-utils/mkfs.cramfs.c:912
#, fuzzy
msgid "warning: filenames truncated to 255 bytes.\n"
msgstr "Varování: poèet i-uzlù je pøíli¹ veliký.\n"
#: disk-utils/mkfs.cramfs.c:915
msgid "warning: files were skipped due to errors.\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:918
#, c-format
msgid "warning: file sizes truncated to %luMB (minus 1 byte).\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:923
#, c-format
msgid ""
"warning: uids truncated to %u bits. (This may be a security concern.)\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:928
#, c-format
msgid ""
"warning: gids truncated to %u bits. (This may be a security concern.)\n"
msgstr ""
#: disk-utils/mkfs.cramfs.c:933
#, c-format
msgid ""
"WARNING: device numbers truncated to %u bits. This almost certainly means\n"
"that some device files will be wrong.\n"
msgstr ""
#: disk-utils/mkfs.minix.c:163
#, c-format
msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]\n"
msgstr "Pou¾ití: %s [ -n ] [-c | -l soubor] [-nXX] [-iXX] /dev/název [bloky]\n"
#: disk-utils/mkfs.minix.c:187
#, c-format
msgid "%s is mounted; will not make a filesystem here!"
msgstr "%s je pøipojeno; systém souborù zde vytváøet nebudu!"
#: disk-utils/mkfs.minix.c:248
msgid "seek to boot block failed in write_tables"
msgstr "chyba pøi posunu ukazovátka na startovací blok ve write_tables"
#: disk-utils/mkfs.minix.c:250
msgid "unable to clear boot sector"
msgstr "startovací blok nelze smazat"
#: disk-utils/mkfs.minix.c:252
msgid "seek failed in write_tables"
msgstr "chyba pøi posunu ukazovátka ve write_tables"
#: disk-utils/mkfs.minix.c:256
msgid "unable to write inode map"
msgstr "mapu i-uzlù nelze zapsat"
#: disk-utils/mkfs.minix.c:258
msgid "unable to write zone map"
msgstr "mapu zón nelze zapsat"
#: disk-utils/mkfs.minix.c:260
msgid "unable to write inodes"
msgstr "i-uzly nelze zapsat"
#: disk-utils/mkfs.minix.c:269
msgid "write failed in write_block"
msgstr "chyba pøi zápisu ve write_block"
#. Could make triple indirect block here
#: disk-utils/mkfs.minix.c:277 disk-utils/mkfs.minix.c:351
#: disk-utils/mkfs.minix.c:400
msgid "too many bad blocks"
msgstr "pøíli¹ mnoho chybných blokù"
#: disk-utils/mkfs.minix.c:285
msgid "not enough good blocks"
msgstr "nedostatek korektních blokù"
#: disk-utils/mkfs.minix.c:497
msgid "unable to allocate buffers for maps"
msgstr "buffery pro mapy nelze alokovat"
#: disk-utils/mkfs.minix.c:506
msgid "unable to allocate buffer for inodes"
msgstr "buffery pro i-uzly nelze alokovat"
#: disk-utils/mkfs.minix.c:512
#, c-format
msgid ""
"Maxsize=%ld\n"
"\n"
msgstr ""
"Maxvelikost=%ld\n"
"\n"
#: disk-utils/mkfs.minix.c:526
msgid "seek failed during testing of blocks"
msgstr "chyba pøi posunu ukazovátka v prùbìhu kontroly blokù"
#: disk-utils/mkfs.minix.c:534
msgid "Weird values in do_check: probably bugs\n"
msgstr "Nesprávné hodnoty v do_check: pravdìpodobnì chyby\n"
#: disk-utils/mkfs.minix.c:565 disk-utils/mkswap.c:372
msgid "seek failed in check_blocks"
msgstr "chyba pøi posunu ukazovátka v check_blocks"
#: disk-utils/mkfs.minix.c:574
msgid "bad blocks before data-area: cannot make fs"
msgstr "chybné bloky pøed datovou oblastí: systém souborù nelze vytvoøit"
#: disk-utils/mkfs.minix.c:580 disk-utils/mkfs.minix.c:602
#, c-format
msgid "%d bad blocks\n"
msgstr "chybných blokù: %d\n"
#: disk-utils/mkfs.minix.c:582 disk-utils/mkfs.minix.c:604
msgid "one bad block\n"
msgstr "chybných blokù: 1\n"
#: disk-utils/mkfs.minix.c:592
msgid "can't open file of bad blocks"
msgstr "soubor chybných blokù nelze otevøít"
#: disk-utils/mkfs.minix.c:674
msgid "strtol error: number of blocks not specified"
msgstr "chyba strtol: poèet blokù nebyl zadán"
#: disk-utils/mkfs.minix.c:704
#, c-format
msgid "unable to open %s"
msgstr "%s nelze otevøít"
#: disk-utils/mkfs.minix.c:706
#, c-format
msgid "unable to stat %s"
msgstr "o %s nelze získat informace"
#: disk-utils/mkfs.minix.c:710
#, c-format
msgid "will not try to make filesystem on '%s'"
msgstr "nebudu se pokou¹et vytvoøit systém souborù na '%s'"
#: disk-utils/mkswap.c:178
#, c-format
msgid "Bad user-specified page size %d\n"
msgstr "Zadadaná velikost stránky (%d) je chybná.\n"
#: disk-utils/mkswap.c:187
#, c-format
msgid "Using user-specified page size %d, instead of the system values %d/%d\n"
msgstr ""
"Pou¾ívám zadanou velikost stránky (%d) místo implicitních hodnot (%d/%d).\n"
#: disk-utils/mkswap.c:191
#, c-format
msgid "Assuming pages of size %d (not %d)\n"
msgstr "Pøedpokládám velikost stránek %d (nikoliv %d)\n"
#: disk-utils/mkswap.c:326
#, c-format
msgid "Usage: %s [-c] [-v0|-v1] [-pPAGESZ] /dev/name [blocks]\n"
msgstr "Pou¾ití: %s [-c] [-v0|-v1] [-pVELIKOST STRÁNKY] /dev/název [bloky]\n"
#: disk-utils/mkswap.c:349
msgid "too many bad pages"
msgstr "pøíli¹ mnoho chybných stránek"
#: disk-utils/mkswap.c:363 misc-utils/look.c:183 misc-utils/setterm.c:1145
#: text-utils/more.c:1975 text-utils/more.c:1986
msgid "Out of memory"
msgstr "Nedostatek pamìti"
#: disk-utils/mkswap.c:380
msgid "one bad page\n"
msgstr "chybných stránek: 1\n"
#: disk-utils/mkswap.c:382
#, fuzzy, c-format
msgid "%lu bad pages\n"
msgstr "chybných stránek: %d\n"
#: disk-utils/mkswap.c:502
#, c-format
msgid "%s: error: Nowhere to set up swap on?\n"
msgstr "%s: chyba: Kde mám vytvoøit odkládací prostor?\n"
#: disk-utils/mkswap.c:520
#, fuzzy, c-format
msgid "%s: error: size %lu is larger than device size %lu\n"
msgstr "%s: chyba: zadaná velikost (%ld) je vìt¹í ne¾ velikost zaøízení (%d)\n"
#: disk-utils/mkswap.c:539
#, c-format
msgid "%s: error: unknown version %d\n"
msgstr "%s: chyba: neznámá verze %d\n"
#: disk-utils/mkswap.c:546
#, c-format
msgid "%s: error: swap area needs to be at least %ldkB\n"
msgstr "%s: chyba: minimální velikost odkládacího prostoru je %ldkB\n"
#: disk-utils/mkswap.c:563
#, c-format
msgid "%s: warning: truncating swap area to %ldkB\n"
msgstr "%s: varování: odkládací prostor useknut na %ldkB\n"
#: disk-utils/mkswap.c:577
#, c-format
msgid "Will not try to make swapdevice on '%s'"
msgstr "nebudu se pokou¹et vytvoøit odkládací zaøízení '%s'"
#: disk-utils/mkswap.c:586 disk-utils/mkswap.c:607
msgid "fatal: first page unreadable"
msgstr "osudová chyba: první stránka je neèitelná"
#: disk-utils/mkswap.c:592
#, c-format
msgid ""
"%s: Device '%s' contains a valid Sun disklabel.\n"
"This probably means creating v0 swap would destroy your partition table\n"
"No swap created. If you really want to create swap v0 on that device, use\n"
"the -f option to force it.\n"
msgstr ""
"%s: Zaøízení '%s' obsahuje korektní Sun popis disku.\n"
"To znamená, ¾e vytvoøení odkládacího prostoru v0 by pravdìpodobnì znièilo\n"
"Va¹í tabulku rozdìlení disku. Odkládací prostor nebyl vytvoøen. Pokud "
"opravdu\n"
"chcete vytvoøit odkládací prostor v0, pou¾ijte pøepínaè -f pro vynucení.\n"
#: disk-utils/mkswap.c:616
msgid "Unable to set up swap-space: unreadable"
msgstr "Odkládací prostor nelze nastavit: neèitelné"
#: disk-utils/mkswap.c:617
#, fuzzy, c-format
msgid "Setting up swapspace version %d, size = %llu kB\n"
msgstr "Vytváøím odkládací prostor verze %d, velikost (v bajtech) = %ld\n"
#: disk-utils/mkswap.c:623
msgid "unable to rewind swap-device"
msgstr "odkládací prostor nelze pøevinout"
#: disk-utils/mkswap.c:626
msgid "unable to write signature page"
msgstr "stránku signatur nelze zapsat"
#: disk-utils/mkswap.c:634
msgid "fsync failed"
msgstr "volání fsync selhalo"
#: disk-utils/setfdprm.c:31
#, c-format
msgid "Invalid number: %s\n"
msgstr "Chybné èíslo: %s\n"
#: disk-utils/setfdprm.c:81
#, c-format
msgid "Syntax error: '%s'\n"
msgstr "Syntaktická chyba: '%s'\n"
#: disk-utils/setfdprm.c:91
#, c-format
msgid "No such parameter set: '%s'\n"
msgstr "Chybný argument: '%s'\n"
#: disk-utils/setfdprm.c:101
#, fuzzy, c-format
msgid " %s [ -p ] dev name\n"
msgstr "Pou¾ití: %s [ -p ] název zaøízení\n"
#: disk-utils/setfdprm.c:102
#, fuzzy, c-format
msgid ""
" %s [ -p ] dev size sect heads tracks stretch gap rate spec1 fmt_gap\n"
msgstr ""
" %s [ -p ] zaøízení velikost sekt hlavy stopy stretch gap rychlost\n"
" spec1 fmt_gap\n"
#: disk-utils/setfdprm.c:105
#, fuzzy, c-format
msgid " %s [ -c | -y | -n | -d ] dev\n"
msgstr " %s [ -c | -y | -n | -d ] zaøízení\n"
#: disk-utils/setfdprm.c:107
#, fuzzy, c-format
msgid " %s [ -c | -y | -n ] dev\n"
msgstr " %s [ -c | -y | -n ] zaøízení\n"
#: fdisk/cfdisk.c:370 fdisk/cfdisk.c:2004
msgid "Unusable"
msgstr "Nepou¾itelné"
#: fdisk/cfdisk.c:372 fdisk/cfdisk.c:2006
msgid "Free Space"
msgstr "Volný prostor"
#: fdisk/cfdisk.c:375
msgid "Linux ext2"
msgstr "Linux ext2"
#: fdisk/cfdisk.c:377
#, fuzzy
msgid "Linux ext3"
msgstr "Linux ext2"
#: fdisk/cfdisk.c:379
#, fuzzy
msgid "Linux XFS"
msgstr "Linux"
#: fdisk/cfdisk.c:381
#, fuzzy
msgid "Linux ReiserFS"
msgstr "Linux"
#: fdisk/cfdisk.c:383 fdisk/i386_sys_types.c:57
msgid "Linux"
msgstr "Linux"
#: fdisk/cfdisk.c:386
msgid "OS/2 HPFS"
msgstr "OS/2 HPFS"
#: fdisk/cfdisk.c:388
msgid "OS/2 IFS"
msgstr "OS/2 IFS"
#: fdisk/cfdisk.c:392
msgid "NTFS"
msgstr "NTFS"
#: fdisk/cfdisk.c:403
msgid "Disk has been changed.\n"
msgstr "Na disku byly provedeny zmìny.\n"
#: fdisk/cfdisk.c:404
msgid "Reboot the system to ensure the partition table is correctly updated.\n"
msgstr ""
"Restartujte systém, aby byla jistota, ¾e tabulka rozdìlení disku byla\n"
"korektnì zmìnìna.\n"
#: fdisk/cfdisk.c:407
msgid ""
"\n"
"WARNING: If you have created or modified any\n"
"DOS 6.x partitions, please see the cfdisk manual\n"
"page for additional information.\n"
msgstr ""
"\n"
"VAROVÁNÍ: Pokud jste vytvoøil èi zmìnil nìjaké\n"
"DOS 6.x diskové oddíly, pøeètìte si prosím manuál\n"
"programu cfdisk, abyste získal dodateèné informace.\n"
#: fdisk/cfdisk.c:502
msgid "FATAL ERROR"
msgstr "OSUDOVÁ CHYBA"
#: fdisk/cfdisk.c:503
msgid "Press any key to exit cfdisk"
msgstr "Stisknìte jakoukoliv klávesu pro ukonèení programu cfdisk"
#: fdisk/cfdisk.c:550 fdisk/cfdisk.c:558
msgid "Cannot seek on disk drive"
msgstr "Nelze posunout ukazovátko na disku"
#: fdisk/cfdisk.c:552
msgid "Cannot read disk drive"
msgstr "Z disku nelze èíst"
#: fdisk/cfdisk.c:560
msgid "Cannot write disk drive"
msgstr "Nelze zapisovat na disk"
#: fdisk/cfdisk.c:858
msgid "Too many partitions"
msgstr "pøíli¹ mnoho diskových oddílù"
#: fdisk/cfdisk.c:863
msgid "Partition begins before sector 0"
msgstr "Diskový oddíl zaèíná pøed sektorem 0"
#: fdisk/cfdisk.c:868
msgid "Partition ends before sector 0"
msgstr "Diskový oddíl konèí pøed sektorem 0"
#: fdisk/cfdisk.c:873
msgid "Partition begins after end-of-disk"
msgstr "Diskový oddíl zaèíná za koncem disku"
#: fdisk/cfdisk.c:878
msgid "Partition ends after end-of-disk"
msgstr "Diskový oddíl konèí za koncem disku"
#: fdisk/cfdisk.c:883
msgid "Partition ends in the final partial cylinder"
msgstr ""
#: fdisk/cfdisk.c:907
msgid "logical partitions not in disk order"
msgstr "logické diskový oddíl jsou chybnì seøazeny"
#: fdisk/cfdisk.c:910
msgid "logical partitions overlap"
msgstr "logické diskové oddíly se vzájemnì pøekrývají"
#: fdisk/cfdisk.c:912
msgid "enlarged logical partitions overlap"
msgstr "zvìt¹ené logické diskové oddíly se vzájemnì pøekrývají"
#: fdisk/cfdisk.c:942
msgid ""
"!!!! Internal error creating logical drive with no extended partition !!!!"
msgstr ""
"!!!! Vnitøní chyba pøi vytváøení logického disku bez roz¹íøených diskových "
"oddílù !!!!"
#: fdisk/cfdisk.c:953 fdisk/cfdisk.c:965
msgid ""
"Cannot create logical drive here -- would create two extended partitions"
msgstr ""
"Zde nelze vytvoøit logický disk -- vznikly by dva roz¹íøené diskové oddíly"
#: fdisk/cfdisk.c:1113
msgid "Menu item too long. Menu may look odd."
msgstr "Polo¾ka nabídky je pøíli¹ dlouhá. Nabídka mù¾e vypadat podivnì."
#: fdisk/cfdisk.c:1169
msgid "Menu without direction. Defaulting horizontal."
msgstr "Nabídka nemá zadaný smìr. Pou¾ívám horizontální."
#: fdisk/cfdisk.c:1300
msgid "Illegal key"
msgstr "Chybná klávesa"
#: fdisk/cfdisk.c:1323
msgid "Press a key to continue"
msgstr "Stisknìte klávesu pro pokraèování"
#: fdisk/cfdisk.c:1370 fdisk/cfdisk.c:1975 fdisk/cfdisk.c:2507
#: fdisk/cfdisk.c:2509
msgid "Primary"
msgstr "Primární"
#: fdisk/cfdisk.c:1370
msgid "Create a new primary partition"
msgstr "Vytvoøit nový primární diskový oddíl"
#: fdisk/cfdisk.c:1371 fdisk/cfdisk.c:1975 fdisk/cfdisk.c:2506
#: fdisk/cfdisk.c:2509
msgid "Logical"
msgstr "Logický"
#: fdisk/cfdisk.c:1371
msgid "Create a new logical partition"
msgstr "Vytvoøit nový logický diskový oddíl"
#: fdisk/cfdisk.c:1372 fdisk/cfdisk.c:1427 fdisk/cfdisk.c:2180
msgid "Cancel"
msgstr "Zru¹it"
#: fdisk/cfdisk.c:1372 fdisk/cfdisk.c:1427
msgid "Don't create a partition"
msgstr "Nevytváøet diskový oddíl"
#: fdisk/cfdisk.c:1388
msgid "!!! Internal error !!!"
msgstr "!!! Vnitøní chyba !!!"
#: fdisk/cfdisk.c:1391
msgid "Size (in MB): "
msgstr "Velikost (v MB): "
#: fdisk/cfdisk.c:1425
msgid "Beginning"
msgstr "Zaèátek"
#: fdisk/cfdisk.c:1425
msgid "Add partition at beginning of free space"
msgstr "Vytvoøit diskový oddíl na zaèátku volného prostoru"
#: fdisk/cfdisk.c:1426
msgid "End"
msgstr "Konec"
#: fdisk/cfdisk.c:1426
msgid "Add partition at end of free space"
msgstr "Vytvoøit diskový oddíl na konci volného prostoru"
#: fdisk/cfdisk.c:1444
msgid "No room to create the extended partition"
msgstr "Pro roz¹íøený diskový oddíl není dostatek místa"
#: fdisk/cfdisk.c:1506
#, fuzzy
msgid "No partition table.\n"
msgstr "Nebyla nalezena ¾ádná tabulka rozdìlení disku.\n"
#: fdisk/cfdisk.c:1510
#, fuzzy
msgid "No partition table. Starting with zero table."
msgstr "Chybný podpis na tabulce rozdìlení disku"
#: fdisk/cfdisk.c:1520
#, fuzzy
msgid "Bad signature on partition table"
msgstr "Vytisknout pouze tabulku rozdìlení disku"
#: fdisk/cfdisk.c:1524
#, fuzzy
msgid "Unknown partition table type"
msgstr "Nebyla nalezena ¾ádná tabulka rozdìlení disku.\n"
#: fdisk/cfdisk.c:1526
msgid "Do you wish to start with a zero table [y/N] ?"
msgstr ""
#: fdisk/cfdisk.c:1574
msgid "You specified more cylinders than fit on disk"
msgstr "Zadal jste vìt¹í poèet cylindrù, ne¾ se vejde na disk."
#: fdisk/cfdisk.c:1606
msgid "Cannot open disk drive"
msgstr "Disk nelze otevøít"
#: fdisk/cfdisk.c:1608 fdisk/cfdisk.c:1788
msgid "Opened disk read-only - you have no permission to write"
msgstr "Disk byl otevøen pouze pro ètení - nemáte práva pro zápis"
#: fdisk/cfdisk.c:1629
msgid "Cannot get disk size"
msgstr "Velikost disku nelze zjistit"
#: fdisk/cfdisk.c:1655
msgid "Bad primary partition"
msgstr "Chybný primární diskový oddíl"
#: fdisk/cfdisk.c:1685
msgid "Bad logical partition"
msgstr "Chybný logický diskový oddíl"
#: fdisk/cfdisk.c:1800
msgid "Warning!! This may destroy data on your disk!"
msgstr "Varování!! Toto mù¾e vést ke znièení dat na Va¹em disku!"
#: fdisk/cfdisk.c:1804
msgid "Are you sure you want write the partition table to disk? (yes or no): "
msgstr ""
"Jste si jist, ¾e chcete ulo¾it tabulku rozdìlení disku na disk? (ano èi ne):"
#: fdisk/cfdisk.c:1810
msgid "no"
msgstr "ne"
#: fdisk/cfdisk.c:1811
msgid "Did not write partition table to disk"
msgstr "Tabulka rozdìlení disku nebyla ulo¾ena"
#: fdisk/cfdisk.c:1813
msgid "yes"
msgstr "ano"
#: fdisk/cfdisk.c:1816
msgid "Please enter `yes' or `no'"
msgstr "Zadejte `ano' èi `ne'"
#: fdisk/cfdisk.c:1820
msgid "Writing partition table to disk..."
msgstr "Ukládám tabulku rozdìlení disku na disk"
#: fdisk/cfdisk.c:1845 fdisk/cfdisk.c:1849
msgid "Wrote partition table to disk"
msgstr "Tabulka rozdìlení disku byla ulo¾ena na disk"
#: fdisk/cfdisk.c:1847
msgid ""
"Wrote partition table, but re-read table failed. Reboot to update table."
msgstr ""
"Tabulka byla ulo¾ena, ale nepodaøilo se ji znovu naèíst. Restartujte systém."
#: fdisk/cfdisk.c:1857
msgid "No primary partitions are marked bootable. DOS MBR cannot boot this."
msgstr ""
"®ádný primární diskový oddíl není startovací. DOS MBR takto nenastartuje."
#: fdisk/cfdisk.c:1859
msgid ""
"More than one primary partition is marked bootable. DOS MBR cannot boot this."
msgstr ""
"Více ne¾ 1 primární diskový oddíl je startovací. DOS MBR takto nenastartuje."
#: fdisk/cfdisk.c:1917 fdisk/cfdisk.c:2036 fdisk/cfdisk.c:2120
msgid "Enter filename or press RETURN to display on screen: "
msgstr "Zadejte název souboru èi stisknìte RETURN pro zobrazení: "
#: fdisk/cfdisk.c:1926 fdisk/cfdisk.c:2044 fdisk/cfdisk.c:2128
#, c-format
msgid "Cannot open file '%s'"
msgstr "Soubor '%s' nelze otevøít"
#: fdisk/cfdisk.c:1937
#, c-format
msgid "Disk Drive: %s\n"
msgstr "Disk: %s\n"
#: fdisk/cfdisk.c:1939
msgid "Sector 0:\n"
msgstr "Sektor 0:\n"
#: fdisk/cfdisk.c:1946
#, c-format
msgid "Sector %d:\n"
msgstr "Sektor %d:\n"
#: fdisk/cfdisk.c:1966
msgid " None "
msgstr " ®ádný "
#: fdisk/cfdisk.c:1968
msgid " Pri/Log"
msgstr " Pri/Log"
#: fdisk/cfdisk.c:1970
msgid " Primary"
msgstr " Primární"
#: fdisk/cfdisk.c:1972
msgid " Logical"
msgstr " Logický"
#. odd flag on end
#. type id
#. type name
#: fdisk/cfdisk.c:2010 fdisk/fdisk.c:1433 fdisk/fdisk.c:1745
#: fdisk/fdisksgilabel.c:237 fdisk/fdisksunlabel.c:689 fdisk/sfdisk.c:650
msgid "Unknown"
msgstr "Neznámý"
#: fdisk/cfdisk.c:2016 fdisk/cfdisk.c:2484 fdisk/fdisksunlabel.c:45
msgid "Boot"
msgstr "Startovací"
#: fdisk/cfdisk.c:2018
#, fuzzy, c-format
msgid "(%02X)"
msgstr "Nez(%02X)"
#: fdisk/cfdisk.c:2020
#, fuzzy
msgid "None"
msgstr "Hotovo"
#: fdisk/cfdisk.c:2055 fdisk/cfdisk.c:2139
#, c-format
msgid "Partition Table for %s\n"
msgstr "Tabulka rozdìlení disku pro %s\n"
#: fdisk/cfdisk.c:2057
#, fuzzy
msgid " First Last\n"
msgstr " První Poslední\n"
#: fdisk/cfdisk.c:2058
#, fuzzy
msgid ""
" # Type Sector Sector Offset Length Filesystem Type (ID) "
"Flag\n"
msgstr ""
" # Typ Sektor Sektor Posun Délka ID systému souborù "
"Pøíznaky\n"
#: fdisk/cfdisk.c:2059
#, fuzzy
msgid ""
"-- ------- ----------- ----------- ------ ----------- -------------------- "
"----\n"
msgstr ""
"-- ------- -------- --------- ------ --------- ---------------------- "
"---------\n"
#. Three-line heading. Read "Start Sector" etc vertically.
#: fdisk/cfdisk.c:2142
#, fuzzy
msgid " ---Starting--- ----Ending---- Start Number of\n"
msgstr " ---Poèátek--- ----Konec---- Poèáteèní\n"
#: fdisk/cfdisk.c:2143
#, fuzzy
msgid " # Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors\n"
msgstr " # Pøíz Hlav Sekt Cyl ID Hlav Sekt Cyl sektor Sektorù\n"
#: fdisk/cfdisk.c:2144
#, fuzzy
msgid "-- ----- ---- ---- ---- ---- ---- ---- ---- ----------- -----------\n"
msgstr "-- ----- ---- ---- ---- ---- ---- ---- ---- -------- ---------\n"
#: fdisk/cfdisk.c:2177
msgid "Raw"
msgstr "Pøímý"
#: fdisk/cfdisk.c:2177
msgid "Print the table using raw data format"
msgstr "Vytisknout tabulku v pøímém datovém formátu"
#: fdisk/cfdisk.c:2178 fdisk/cfdisk.c:2281
msgid "Sectors"
msgstr "Sektory"
#: fdisk/cfdisk.c:2178
msgid "Print the table ordered by sectors"
msgstr "Vytisknout tabulku seøazenou dle sektorù"
#: fdisk/cfdisk.c:2179
msgid "Table"
msgstr "Tabulka"
#: fdisk/cfdisk.c:2179
msgid "Just print the partition table"
msgstr "Vytisknout pouze tabulku rozdìlení disku"
#: fdisk/cfdisk.c:2180
msgid "Don't print the table"
msgstr "Netisknout tabulku"
#: fdisk/cfdisk.c:2208
msgid "Help Screen for cfdisk"
msgstr "Nápovìda pro cfdisk"
#: fdisk/cfdisk.c:2210
msgid "This is cfdisk, a curses based disk partitioning program, which"
msgstr "Toto je cfdisk, program pro vytváøení diskových oddílù zalo¾ený"
#: fdisk/cfdisk.c:2211
msgid "allows you to create, delete and modify partitions on your hard"
msgstr "na knihovnì curses. Umo¾òuje vytváøení, mazání a modifikaci"
#: fdisk/cfdisk.c:2212
msgid "disk drive."
msgstr "diskových oddílù na Va¹em pevném disku."
#: fdisk/cfdisk.c:2214
msgid "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
msgstr "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
#: fdisk/cfdisk.c:2216
msgid "Command Meaning"
msgstr "Pøíkaz Význam"
#: fdisk/cfdisk.c:2217
msgid "------- -------"
msgstr "------- -------"
#: fdisk/cfdisk.c:2218
msgid " b Toggle bootable flag of the current partition"
msgstr " b Pøepne aktuálnímu oddílu pøíznak startovatelnosti"
#: fdisk/cfdisk.c:2219
msgid " d Delete the current partition"
msgstr " d Sma¾e aktuální oddíl"
#: fdisk/cfdisk.c:2220
msgid " g Change cylinders, heads, sectors-per-track parameters"
msgstr " g Zmìní geometrii"
#: fdisk/cfdisk.c:2221
msgid " WARNING: This option should only be used by people who"
msgstr " VAROVÁNÍ: Tato volba by mìla být pou¾ívána pouze lidmi,"
#: fdisk/cfdisk.c:2222
msgid " know what they are doing."
msgstr " kteøí vìdí, co èiní."
#: fdisk/cfdisk.c:2223
msgid " h Print this screen"
msgstr " h Vypí¹e tuto nápovìdu"
#: fdisk/cfdisk.c:2224
msgid " m Maximize disk usage of the current partition"
msgstr " m Maximálnì zvìt¹í aktuální diskový oddíl "
#: fdisk/cfdisk.c:2225
msgid " Note: This may make the partition incompatible with"
msgstr " Poznámka: Toto mù¾e uèinit oddíl nekompatibilní s"
#: fdisk/cfdisk.c:2226
msgid " DOS, OS/2, ..."
msgstr " DOS, OS/2 ..."
#: fdisk/cfdisk.c:2227
msgid " n Create new partition from free space"
msgstr " n Vytvoøit na volném místì nový oddíl"
#: fdisk/cfdisk.c:2228
msgid " p Print partition table to the screen or to a file"
msgstr " p Vypí¹e tabulku rozdìlení disku na obrazovku èi do souboru"
#: fdisk/cfdisk.c:2229
msgid " There are several different formats for the partition"
msgstr " Pøi výpisu tabulky rozdìlení disku si mù¾ete zvolit"
#: fdisk/cfdisk.c:2230
msgid " that you can choose from:"
msgstr " z nìkolika formátù:"
#: fdisk/cfdisk.c:2231
msgid " r - Raw data (exactly what would be written to disk)"
msgstr " r - Pøímý (pøesnì to, co by bylo zapsáno na disk)"
#: fdisk/cfdisk.c:2232
msgid " s - Table ordered by sectors"
msgstr " s - Tabulka seøazená dle sektorù"
#: fdisk/cfdisk.c:2233
msgid " t - Table in raw format"
msgstr " t - Tabulka v pøímém formátu"
#: fdisk/cfdisk.c:2234
msgid " q Quit program without writing partition table"
msgstr " q Ukonèí program bez ulo¾ení tabulky rozdìlení disku"
#: fdisk/cfdisk.c:2235
msgid " t Change the filesystem type"
msgstr " t Zmìní typ systému souborù"
#: fdisk/cfdisk.c:2236
msgid " u Change units of the partition size display"
msgstr " u Zmìní jednotky pro zobrazení velikosti oddílu"
#: fdisk/cfdisk.c:2237
msgid " Rotates through MB, sectors and cylinders"
msgstr " Cykluje mezi MB, sektory a cylindry"
#: fdisk/cfdisk.c:2238
msgid " W Write partition table to disk (must enter upper case W)"
msgstr " W Ulo¾í tabulku rozdìlení disku (pouze velké W)"
#: fdisk/cfdisk.c:2239
msgid " Since this might destroy data on the disk, you must"
msgstr " Jeliko¾ to mù¾e znièit na disku, musíte to potvrdit"
#: fdisk/cfdisk.c:2240
msgid " either confirm or deny the write by entering `yes' or"
msgstr " nebo odmítnout napsáním `yes' nebo"
#: fdisk/cfdisk.c:2241
msgid " `no'"
msgstr " `no'"
#: fdisk/cfdisk.c:2242
msgid "Up Arrow Move cursor to the previous partition"
msgstr "Nahoru Pøesune kurzor na pøedcházející oddíl."
#: fdisk/cfdisk.c:2243
msgid "Down Arrow Move cursor to the next partition"
msgstr "Dolù Pøesune kurzor na dal¹í oddíl."
#: fdisk/cfdisk.c:2244
msgid "CTRL-L Redraws the screen"
msgstr "CTRL-L Pøekreslí obrazovku"
#: fdisk/cfdisk.c:2245
msgid " ? Print this screen"
msgstr " ? Vypí¹e tuto nápovìdu"
#: fdisk/cfdisk.c:2247
msgid "Note: All of the commands can be entered with either upper or lower"
msgstr "Poznámka: V¹echny pøíkazy mohou být zadány malými i velkými písmeny"
#: fdisk/cfdisk.c:2248
msgid "case letters (except for Writes)."
msgstr "(s vyjímkou zápisu - W)."
#: fdisk/cfdisk.c:2279 fdisk/fdisksunlabel.c:318 fdisk/fdisksunlabel.c:320
msgid "Cylinders"
msgstr "Cylindry"
#: fdisk/cfdisk.c:2279
msgid "Change cylinder geometry"
msgstr "Zmìní geometrii cylindrù"
#: fdisk/cfdisk.c:2280 fdisk/fdisksunlabel.c:315
msgid "Heads"
msgstr "Hlavy"
#: fdisk/cfdisk.c:2280
msgid "Change head geometry"
msgstr "Zmìní geometrii hlav"
#: fdisk/cfdisk.c:2281
msgid "Change sector geometry"
msgstr "Zmìní geometrii sektorù"
#: fdisk/cfdisk.c:2282
msgid "Done"
msgstr "Hotovo"
#: fdisk/cfdisk.c:2282
msgid "Done with changing geometry"
msgstr "Geometrie zmìnìna"
#: fdisk/cfdisk.c:2295
msgid "Enter the number of cylinders: "
msgstr "Zadejte poèet cylindrù: "
#: fdisk/cfdisk.c:2306 fdisk/cfdisk.c:2877
msgid "Illegal cylinders value"
msgstr "Chybný poèet cylindrù"
#: fdisk/cfdisk.c:2312
msgid "Enter the number of heads: "
msgstr "Zadejte poèet hlav: "
#: fdisk/cfdisk.c:2319 fdisk/cfdisk.c:2887
msgid "Illegal heads value"
msgstr "Chybný poèet hlav"
#: fdisk/cfdisk.c:2325
msgid "Enter the number of sectors per track: "
msgstr "Zadejte poèet sektorù na stopu: "
#: fdisk/cfdisk.c:2332 fdisk/cfdisk.c:2894
msgid "Illegal sectors value"
msgstr "Chybný poèet sektorù"
#: fdisk/cfdisk.c:2435
msgid "Enter filesystem type: "
msgstr "Zadejte typ systému souborù: "
#: fdisk/cfdisk.c:2453
msgid "Cannot change FS Type to empty"
msgstr "Nelze nastavit typ SS na prázdný"
#: fdisk/cfdisk.c:2455
msgid "Cannot change FS Type to extended"
msgstr "Nelze nastavit typ SS na roz¹íøený"
#: fdisk/cfdisk.c:2486
#, c-format
msgid "Unk(%02X)"
msgstr "Nez(%02X)"
#: fdisk/cfdisk.c:2489 fdisk/cfdisk.c:2492
msgid ", NC"
msgstr ", NC"
#: fdisk/cfdisk.c:2497 fdisk/cfdisk.c:2500
msgid "NC"
msgstr "NC"
#: fdisk/cfdisk.c:2508
msgid "Pri/Log"
msgstr "Pri/Log"
#: fdisk/cfdisk.c:2515
#, c-format
msgid "Unknown (%02X)"
msgstr "Neznámý (%02X)"
#: fdisk/cfdisk.c:2584
#, c-format
msgid "Disk Drive: %s"
msgstr "Disk: %s"
#: fdisk/cfdisk.c:2591
#, fuzzy, c-format
msgid "Size: %lld bytes, %lld MB"
msgstr "Velikost v bajtech: %lld"
#: fdisk/cfdisk.c:2594
#, fuzzy, c-format
msgid "Size: %lld bytes, %lld.%lld GB"
msgstr "Velikost v bajtech: %lld"
#: fdisk/cfdisk.c:2598
#, fuzzy, c-format
msgid "Heads: %d Sectors per Track: %d Cylinders: %lld"
msgstr "Hlav: %d Sektorù na stopu: %d Cylindrù: %d"
#: fdisk/cfdisk.c:2602
msgid "Name"
msgstr "Název"
#: fdisk/cfdisk.c:2603
msgid "Flags"
msgstr "Pøíznaky"
#: fdisk/cfdisk.c:2604
msgid "Part Type"
msgstr "Typ oddílu"
#: fdisk/cfdisk.c:2605
msgid "FS Type"
msgstr "Typ SS"
#: fdisk/cfdisk.c:2606
msgid "[Label]"
msgstr "[Popis]"
#: fdisk/cfdisk.c:2608
#, fuzzy
msgid " Sectors"
msgstr " Sektory"
#: fdisk/cfdisk.c:2610
#, fuzzy
msgid " Cylinders"
msgstr "Cylindry"
#: fdisk/cfdisk.c:2612
#, fuzzy
msgid " Size (MB)"
msgstr "Velikost (MB)"
#: fdisk/cfdisk.c:2614
#, fuzzy
msgid " Size (GB)"
msgstr "Velikost (GB)"
#: fdisk/cfdisk.c:2668
msgid "Bootable"
msgstr "Start"
#: fdisk/cfdisk.c:2668
msgid "Toggle bootable flag of the current partition"
msgstr "Pøepne pøíznak startovatelnosti aktuálnímu diskovému oddílu"
#: fdisk/cfdisk.c:2669
msgid "Delete"
msgstr "Smazat"
#: fdisk/cfdisk.c:2669
msgid "Delete the current partition"
msgstr "Sma¾e aktuální diskový oddíl"
#: fdisk/cfdisk.c:2670
msgid "Geometry"
msgstr "Geometrie"
#: fdisk/cfdisk.c:2670
msgid "Change disk geometry (experts only)"
msgstr "Zmìní geometrii disku (pouze pro odborníky)"
#: fdisk/cfdisk.c:2671
msgid "Help"
msgstr "Nápovìda"
#: fdisk/cfdisk.c:2671
msgid "Print help screen"
msgstr "Vypí¹e nápovìdu"
#: fdisk/cfdisk.c:2672
msgid "Maximize"
msgstr "Zvìt¹ení"
#: fdisk/cfdisk.c:2672
msgid "Maximize disk usage of the current partition (experts only)"
msgstr ""
"Zvìt¹í velikost aktuálního diskového oddílu na maximum (pouze pro odborníky)"
#: fdisk/cfdisk.c:2673
msgid "New"
msgstr "Nový"
#: fdisk/cfdisk.c:2673
msgid "Create new partition from free space"
msgstr "Vytvoøí nový diskový oddíl ve volném prostoru"
#: fdisk/cfdisk.c:2674
msgid "Print"
msgstr "Tisk"
#: fdisk/cfdisk.c:2674
msgid "Print partition table to the screen or to a file"
msgstr "Vypí¹e tabulku rozdìlení disku (na obrazovku èi do souboru)"
#: fdisk/cfdisk.c:2675
msgid "Quit"
msgstr "Konec"
#: fdisk/cfdisk.c:2675
msgid "Quit program without writing partition table"
msgstr "Ukonèí program bez ulo¾ení tabulky rozdìlení disku"
#: fdisk/cfdisk.c:2676
msgid "Type"
msgstr "Druh"
#: fdisk/cfdisk.c:2676
msgid "Change the filesystem type (DOS, Linux, OS/2 and so on)"
msgstr "Zmìní typ systému souborù (DOS, Linux, OS/2 atd.)"
#: fdisk/cfdisk.c:2677
msgid "Units"
msgstr "Jednotky"
#: fdisk/cfdisk.c:2677
msgid "Change units of the partition size display (MB, sect, cyl)"
msgstr "Zmìní jednotky, ve kterých je udávána velikost diskového oddílu"
#: fdisk/cfdisk.c:2678
msgid "Write"
msgstr "Ulo¾it"
#: fdisk/cfdisk.c:2678
msgid "Write partition table to disk (this might destroy data)"
msgstr "Ulo¾í tabulku rozdìlení disku na disk (mù¾e znièit data)"
#: fdisk/cfdisk.c:2724
msgid "Cannot make this partition bootable"
msgstr "Tento oddíl nelze nastavit jako startovací."
#: fdisk/cfdisk.c:2734
msgid "Cannot delete an empty partition"
msgstr "Prázdný diskový oddíl nelze smazat."
#: fdisk/cfdisk.c:2754 fdisk/cfdisk.c:2756
msgid "Cannot maximize this partition"
msgstr "Tento diskový oddíl nelze zvìt¹it."
#: fdisk/cfdisk.c:2764
msgid "This partition is unusable"
msgstr "Tento diskový oddíl je nepou¾itelný."
#: fdisk/cfdisk.c:2766
msgid "This partition is already in use"
msgstr "Tento diskový oddíl je ji¾ pou¾íván."
#: fdisk/cfdisk.c:2783
msgid "Cannot change the type of an empty partition"
msgstr "Typ prázdného diskového oddílu nelze zmìnit."
#: fdisk/cfdisk.c:2810 fdisk/cfdisk.c:2816
msgid "No more partitions"
msgstr "®ádné dal¹í diskové oddíly"
#: fdisk/cfdisk.c:2823
msgid "Illegal command"
msgstr "Chybný pøíkaz"
#: fdisk/cfdisk.c:2833
#, fuzzy
msgid "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"
msgstr "Copyright (C) 1994-2000 Kevin E. Martin & aeb\n"
#. Unfortunately, xgettext does not handle multi-line strings
#. so, let's use explicit \n's instead
#: fdisk/cfdisk.c:2840
#, c-format
msgid ""
"\n"
"Usage:\n"
"Print version:\n"
" %s -v\n"
"Print partition table:\n"
" %s -P {r|s|t} [options] device\n"
"Interactive use:\n"
" %s [options] device\n"
"\n"
"Options:\n"
"-a: Use arrow instead of highlighting;\n"
"-z: Start with a zero partition table, instead of reading the pt from disk;\n"
"-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n"
" the number of heads and the number of sectors/track.\n"
"\n"
msgstr ""
"\n"
"Pou¾ití:\n"
"Vypí¹e informace o verzi:\n"
" %s -v\n"
"Vypí¹e tabulku rozdìlení disku:\n"
" %s -P {r|s|t} [pøepínaèe] zaøízení\n"
"Interaktivní re¾im:\n"
" %s [pøepínaèe] zaøízení\n"
"\n"
"Pøepínaèe:\n"
"-a: Namísto zvýrazòování pou¾ije ¹ipku;\n"
"-z: Zaène s nulovou tabulkou rozdìlení disku místo, aby ji èetl z disku;\n"
"-c C -h H -s S: Zadání geometrie disku (má pøednost pøed údaji, které "
"udr¾uje\n"
" jádro.\n"
"\n"
#: fdisk/fdisk.c:188
#, fuzzy
msgid ""
"Usage: fdisk [-b SSZ] [-u] DISK Change partition table\n"
" fdisk -l [-b SSZ] [-u] DISK List partition table(s)\n"
" fdisk -s PARTITION Give partition size(s) in blocks\n"
" fdisk -v Give fdisk version\n"
"Here DISK is something like /dev/hdb or /dev/sda\n"
"and PARTITION is something like /dev/hda7\n"
"-u: give Start and End in sector (instead of cylinder) units\n"
"-b 2048: (for certain MO disks) use 2048-byte sectors\n"
msgstr ""
"Pou¾ití: fdisk [-b SSZ] [-u] DISK Zmìní tabulku rozdìlení disku\n"
" fdisk -l [-b SSZ] [-u] DISK Vypí¹e tabulku rozdìlení disku\n"
" fdisk -s ODDÍL Vypí¹e velikost diskového oddílu\n"
" v blocích\n"
" fdisk -v Vypí¹e informace o verzi\n"
"DISK je nìco jako /dev/hdb èi /dev/sda a ODDÍL je nìco jako /dev/hda7\n"
"-u: zadání Zaèátku a Konce v sektorech (místo cylindrech)\n"
"-b 2048: (pro nìkteré MO jednotky) pou¾ije 2048bajtové sektory\n"
#: fdisk/fdisk.c:200
msgid ""
"Usage: fdisk [-l] [-b SSZ] [-u] device\n"
"E.g.: fdisk /dev/hda (for the first IDE disk)\n"
" or: fdisk /dev/sdc (for the third SCSI disk)\n"
" or: fdisk /dev/eda (for the first PS/2 ESDI drive)\n"
" or: fdisk /dev/rd/c0d0 or: fdisk /dev/ida/c0d0 (for RAID devices)\n"
" ...\n"
msgstr ""
"Pou¾ití: fdisk [-l] [-b SSZ] [-u] zaøízení\n"
"Napø: fdisk /dev/hda (pro první IDE disk)\n"
" èi: fdisk /dev/sdc (pro tøetí SCSI disk)\n"
" èi: fdisk /dev/eda (pro první PS/2 ESDI disk)\n"
" èi: fdisk /dev/rd/c0d0 èi: fdisk /dev/ida/c0d0 (pro RAID zaøízení)\n"
" ...\n"
#: fdisk/fdisk.c:209
#, c-format
msgid "Unable to open %s\n"
msgstr "%s nelze otevøít\n"
#: fdisk/fdisk.c:213
#, c-format
msgid "Unable to read %s\n"
msgstr "%s nelze èíst\n"
#: fdisk/fdisk.c:217
#, c-format
msgid "Unable to seek on %s\n"
msgstr "Ukazovátko nelze posunout na %s.\n"
#: fdisk/fdisk.c:221
#, c-format
msgid "Unable to write %s\n"
msgstr "%s nelze ulo¾it\n"
#: fdisk/fdisk.c:225
#, c-format
msgid "BLKGETSIZE ioctl failed on %s\n"
msgstr "volání BLKGETSIZE ioctl pro %s selhalo\n"
#: fdisk/fdisk.c:229
msgid "Unable to allocate any more memory\n"
msgstr "Nelze alokovat více pamìti\n"
#: fdisk/fdisk.c:232
msgid "Fatal error\n"
msgstr "Fatální chyba\n"
#: fdisk/fdisk.c:330 fdisk/fdisk.c:349 fdisk/fdisk.c:367 fdisk/fdisk.c:374
#: fdisk/fdisk.c:397 fdisk/fdisk.c:415 fdisk/fdisk.c:431 fdisk/fdisk.c:447
#: fdisk/fdiskbsdlabel.c:129
msgid "Command action"
msgstr "Pøíkazy"
#: fdisk/fdisk.c:331
msgid " a toggle a read only flag"
msgstr " a pøepne pøíznak \"pouze pro ètení\""
#. sun
#: fdisk/fdisk.c:332 fdisk/fdisk.c:376
msgid " b edit bsd disklabel"
msgstr " b úprava bsd popisu disku"
#: fdisk/fdisk.c:333
msgid " c toggle the mountable flag"
msgstr " c pøepne pøíznak \"pøipojitelný\""
#. sun
#: fdisk/fdisk.c:334 fdisk/fdisk.c:353 fdisk/fdisk.c:378
msgid " d delete a partition"
msgstr " d sma¾e diskový oddíl"
#: fdisk/fdisk.c:335 fdisk/fdisk.c:354 fdisk/fdisk.c:379
msgid " l list known partition types"
msgstr " l vypí¹e známé typy diskových oddílù"
#. sun
#: fdisk/fdisk.c:336 fdisk/fdisk.c:355 fdisk/fdisk.c:368 fdisk/fdisk.c:380
#: fdisk/fdisk.c:405 fdisk/fdisk.c:422 fdisk/fdisk.c:438 fdisk/fdisk.c:455
#: fdisk/fdiskbsdlabel.c:134
msgid " m print this menu"
msgstr " m vypí¹e tuto nabídku"
#: fdisk/fdisk.c:337 fdisk/fdisk.c:356 fdisk/fdisk.c:381
msgid " n add a new partition"
msgstr " n vytvoøí nový diskový oddíl"
#: fdisk/fdisk.c:338 fdisk/fdisk.c:357 fdisk/fdisk.c:369 fdisk/fdisk.c:382
msgid " o create a new empty DOS partition table"
msgstr " o vytvoøí prázdný DOSOVÝ diskový oddíl"
#: fdisk/fdisk.c:339 fdisk/fdisk.c:358 fdisk/fdisk.c:383 fdisk/fdisk.c:406
#: fdisk/fdisk.c:423 fdisk/fdisk.c:439 fdisk/fdisk.c:456
msgid " p print the partition table"
msgstr " p vypí¹e tabulku rozdìlení disku"
#: fdisk/fdisk.c:340 fdisk/fdisk.c:359 fdisk/fdisk.c:370 fdisk/fdisk.c:384
#: fdisk/fdisk.c:407 fdisk/fdisk.c:424 fdisk/fdisk.c:440 fdisk/fdisk.c:457
#: fdisk/fdiskbsdlabel.c:137
msgid " q quit without saving changes"
msgstr " q ukonèí program bez ulo¾ení zmìn"
#: fdisk/fdisk.c:341 fdisk/fdisk.c:360 fdisk/fdisk.c:371 fdisk/fdisk.c:385
msgid " s create a new empty Sun disklabel"
msgstr " s vytvoøí prázdný Sun popis disku"
#. sun
#: fdisk/fdisk.c:342 fdisk/fdisk.c:361 fdisk/fdisk.c:386
msgid " t change a partition's system id"
msgstr " t zmìní id diskového oddílu"
#: fdisk/fdisk.c:343 fdisk/fdisk.c:362 fdisk/fdisk.c:387
msgid " u change display/entry units"
msgstr " u zmìní jednotky v nich¾ jsou vypisovány informace"
#: fdisk/fdisk.c:344 fdisk/fdisk.c:363 fdisk/fdisk.c:388 fdisk/fdisk.c:410
#: fdisk/fdisk.c:427 fdisk/fdisk.c:443 fdisk/fdisk.c:460
msgid " v verify the partition table"
msgstr " v ovìøí tabulku rozdìlení disku"
#: fdisk/fdisk.c:345 fdisk/fdisk.c:364 fdisk/fdisk.c:389 fdisk/fdisk.c:411
#: fdisk/fdisk.c:428 fdisk/fdisk.c:444 fdisk/fdisk.c:461
msgid " w write table to disk and exit"
msgstr " w ulo¾í tabulku rozdìlení disku a ukonèí program"
#: fdisk/fdisk.c:346 fdisk/fdisk.c:390
msgid " x extra functionality (experts only)"
msgstr " x roz¹iøující funkce (pouze pro odborníky)"
#: fdisk/fdisk.c:350
msgid " a select bootable partition"
msgstr " a nastaví startovací diskový oddíl"
#. sgi flavour
#: fdisk/fdisk.c:351
msgid " b edit bootfile entry"
msgstr " b úprava polo¾ky startovacího souboru"
#. sgi
#: fdisk/fdisk.c:352
msgid " c select sgi swap partition"
msgstr " c nastaví sgi odkládací diskový oddíl"
#: fdisk/fdisk.c:375
msgid " a toggle a bootable flag"
msgstr " a pøepne pøíznak \"startovací\""
#: fdisk/fdisk.c:377
msgid " c toggle the dos compatibility flag"
msgstr " c pøepne pøíznak \"DOS kompatibilní\""
#: fdisk/fdisk.c:398
msgid " a change number of alternate cylinders"
msgstr " a zmìní mno¾ství alternativních cylindrù"
#. sun
#: fdisk/fdisk.c:399 fdisk/fdisk.c:417 fdisk/fdisk.c:433 fdisk/fdisk.c:449
msgid " c change number of cylinders"
msgstr " c zmìní mno¾ství cylindrù"
#: fdisk/fdisk.c:400 fdisk/fdisk.c:418 fdisk/fdisk.c:434 fdisk/fdisk.c:450
msgid " d print the raw data in the partition table"
msgstr " d vypí¹e tabulku rozdìlení disku (tak jak je ulo¾ena na disku)"
#: fdisk/fdisk.c:401
msgid " e change number of extra sectors per cylinder"
msgstr " e zmìní mno¾ství extra sektorù na stopu"
#. sun
#: fdisk/fdisk.c:402 fdisk/fdisk.c:421 fdisk/fdisk.c:437 fdisk/fdisk.c:454
msgid " h change number of heads"
msgstr " h zmìní mno¾ství hlav"
#: fdisk/fdisk.c:403
msgid " i change interleave factor"
msgstr " i zmìní prokládací faktor"
#. sun
#: fdisk/fdisk.c:404
msgid " o change rotation speed (rpm)"
msgstr " o zmìní rychlost otáèení"
#: fdisk/fdisk.c:408 fdisk/fdisk.c:425 fdisk/fdisk.c:441 fdisk/fdisk.c:458
#: fdisk/fdiskbsdlabel.c:138
msgid " r return to main menu"
msgstr " r návrat do hlavní nabídky"
#: fdisk/fdisk.c:409 fdisk/fdisk.c:426 fdisk/fdisk.c:442 fdisk/fdisk.c:459
msgid " s change number of sectors/track"
msgstr " s zmìní poèet sektorù/stopu"
#: fdisk/fdisk.c:412
msgid " y change number of physical cylinders"
msgstr " y zmìní poèet fyzických cylindrù"
#: fdisk/fdisk.c:416 fdisk/fdisk.c:432 fdisk/fdisk.c:448
msgid " b move beginning of data in a partition"
msgstr " b posune poèátek dat v diskovém oddílu"
#: fdisk/fdisk.c:419 fdisk/fdisk.c:435 fdisk/fdisk.c:451
msgid " e list extended partitions"
msgstr " e vypí¹e roz¹íøené diskové oddíly"
#. !sun
#: fdisk/fdisk.c:420 fdisk/fdisk.c:436 fdisk/fdisk.c:453
#, fuzzy
msgid " g create an IRIX (SGI) partition table"
msgstr " g vytvoøí IRIX tabulku rozdìlení disku"
#. !sun
#: fdisk/fdisk.c:452
msgid " f fix partition order"
msgstr " f opraví øazení diskových oddílù"
#: fdisk/fdisk.c:570
msgid "You must set"
msgstr "Musíte nastavit"
#: fdisk/fdisk.c:584
msgid "heads"
msgstr "hlavy"
#: fdisk/fdisk.c:586 fdisk/fdisk.c:1255 fdisk/sfdisk.c:936
msgid "sectors"
msgstr "sektory"
#: fdisk/fdisk.c:588 fdisk/fdisk.c:1255 fdisk/fdiskbsdlabel.c:470
#: fdisk/sfdisk.c:936
msgid "cylinders"
msgstr "cylindry"
#: fdisk/fdisk.c:592
#, c-format
msgid ""
"%s%s.\n"
"You can do this from the extra functions menu.\n"
msgstr ""
"%s%s.\n"
"Mù¾ete tak uèinit z nabídky roz¹iøujících funkcí.\n"
#: fdisk/fdisk.c:593
msgid " and "
msgstr " a "
#: fdisk/fdisk.c:610
#, c-format
msgid ""
"\n"
"The number of cylinders for this disk is set to %d.\n"
"There is nothing wrong with that, but this is larger than 1024,\n"
"and could in certain setups cause problems with:\n"
"1) software that runs at boot time (e.g., old versions of LILO)\n"
"2) booting and partitioning software from other OSs\n"
" (e.g., DOS FDISK, OS/2 FDISK)\n"
msgstr ""
"\n"
"Poèet cylindrù tohoto disku je nastaven na %d.\n"
"Na tom není nic ¹patného, ale jeliko¾ je to více ne¾ 1024,\n"
"mù¾e za urèitých okolností dojít k problémùm s:\n"
"1) s programy sou¹tìnými pøi startu (napø. staré verze LILA)\n"
"2) s programy pro správu diskových oddílù z jiných OS\n"
" (napø. DOS FDISK, OS/2 FDISK)\n"
#: fdisk/fdisk.c:633
msgid "Bad offset in primary extended partition\n"
msgstr "Chybný posun v primárním diskovém oddílu\n"
#: fdisk/fdisk.c:647
#, fuzzy, c-format
msgid "Warning: omitting partitions after %d\n"
msgstr "Varování: ma¾u diskový oddíl za %d\n"
#: fdisk/fdisk.c:664
#, c-format
msgid "Warning: extra link pointer in partition table %d\n"
msgstr "Varování: nadbyteèný ukazatel na link v tabulce rozdìlení disku %d.\n"
#: fdisk/fdisk.c:672
#, c-format
msgid "Warning: ignoring extra data in partition table %d\n"
msgstr "Varování: nadbyteèná data v tabulce rozdìlení disku %d ignorována.\n"
#: fdisk/fdisk.c:717
msgid ""
"Building a new DOS disklabel. Changes will remain in memory only,\n"
"until you decide to write them. After that, of course, the previous\n"
"content won't be recoverable.\n"
"\n"
msgstr ""
"Vytváøím novou DOSOVOU tabulku rozdìlení disku. Zmìny budou ulo¾eny pouze "
"do\n"
"pamìti, dokud se nerozhodnete je ulo¾it na disk. Poté ji¾ nebudou stará "
"data\n"
"pochopitelnì dostupná.\n"
#: fdisk/fdisk.c:761
#, c-format
msgid "Note: sector size is %d (not %d)\n"
msgstr "Pozor: velikost sektoru je %d (nikoliv %d)\n"
#: fdisk/fdisk.c:918
msgid "You will not be able to write the partition table.\n"
msgstr "Nebudete moci ulo¾it tabulku rozdìlení disku.\n"
#: fdisk/fdisk.c:947
msgid ""
"This disk has both DOS and BSD magic.\n"
"Give the 'b' command to go to BSD mode.\n"
msgstr ""
#: fdisk/fdisk.c:957
msgid ""
"Device contains neither a valid DOS partition table, nor Sun, SGI or OSF "
"disklabel\n"
msgstr ""
"Zaøízení neobsahuje ani DOSOVOU tabulku rozdìlení disku, ani SUN èi SGI "
"popis\n"
"disku\n"
#: fdisk/fdisk.c:974
msgid "Internal error\n"
msgstr "Vnitøní chyba\n"
#: fdisk/fdisk.c:987
#, c-format
msgid "Ignoring extra extended partition %d\n"
msgstr "Nadbyteèný roz¹íøený diskový oddíl %d ignorován.\n"
#: fdisk/fdisk.c:999
#, c-format
msgid ""
"Warning: invalid flag 0x%04x of partition table %d will be corrected by w"
"(rite)\n"
msgstr ""
"Varování: chybný pøíznak 0x%04x tabulky rozdìlení disku %d bude opraven "
"zápisem(w)\n"
#: fdisk/fdisk.c:1021
msgid ""
"\n"
"got EOF thrice - exiting..\n"
msgstr ""
"\n"
"tøikrát jsem nalezl EOF - konèím..\n"
#: fdisk/fdisk.c:1060
msgid "Hex code (type L to list codes): "
msgstr "©estnáctkovì (L vypí¹e kódy):"
#: fdisk/fdisk.c:1100
#, fuzzy, c-format
msgid "%s (%u-%u, default %u): "
msgstr "%s (%d-%d, implicitnì %d): "
#: fdisk/fdisk.c:1167
#, fuzzy, c-format
msgid "Using default value %u\n"
msgstr "Pou¾ívám implicitní hodnotu %d\n"
#: fdisk/fdisk.c:1171
msgid "Value out of range.\n"
msgstr "Hodnota je mimo meze.\n"
#: fdisk/fdisk.c:1181
msgid "Partition number"
msgstr "Èíslo diskového oddílu"
#: fdisk/fdisk.c:1192
#, c-format
msgid "Warning: partition %d has empty type\n"
msgstr "Varování: diskový oddíl %d nemá urèen typ\n"
#: fdisk/fdisk.c:1214 fdisk/fdisk.c:1240
#, fuzzy, c-format
msgid "Selected partition %d\n"
msgstr "Nadbyteèný roz¹íøený diskový oddíl %d ignorován.\n"
#: fdisk/fdisk.c:1217
#, fuzzy
msgid "No partition is defined yet!\n"
msgstr "Nejsou definovány ¾ádné diskové oddíly\n"
#: fdisk/fdisk.c:1243
msgid "All primary partitions have been defined already!\n"
msgstr ""
#: fdisk/fdisk.c:1253
msgid "cylinder"
msgstr "cylindr"
#: fdisk/fdisk.c:1253
msgid "sector"
msgstr "sektor"
#: fdisk/fdisk.c:1262
#, c-format
msgid "Changing display/entry units to %s\n"
msgstr "Mìním jednotky v nich¾ jsou vypisovány informace na %sy\n"
#: fdisk/fdisk.c:1273
#, c-format
msgid "WARNING: Partition %d is an extended partition\n"
msgstr "VAROVÁNÍ: diskový oddíl %d je roz¹íøeným diskovým oddílem\n"
#: fdisk/fdisk.c:1284
msgid "DOS Compatibility flag is set\n"
msgstr "Pøíznak DOSOVÉ kompatibility je nastaven.\n"
#: fdisk/fdisk.c:1288
msgid "DOS Compatibility flag is not set\n"
msgstr "Pøíznak DOSOVÉ kompatibility není nastaven.\n"
#: fdisk/fdisk.c:1388
#, c-format
msgid "Partition %d does not exist yet!\n"
msgstr "Diskový oddíl %d zatím neexistuje!\n"
#: fdisk/fdisk.c:1393
msgid ""
"Type 0 means free space to many systems\n"
"(but not to Linux). Having partitions of\n"
"type 0 is probably unwise. You can delete\n"
"a partition using the `d' command.\n"
msgstr ""
"Na mnoha systémech (ale ne na Linuxu) typ 0 oznaèuje\n"
"volný prostor. Vytváøet diskové oddíly typu 0 není moudré.\n"
"Diskový oddíl mù¾ete smazat pomocí pøíkazu `d'.\n"
#: fdisk/fdisk.c:1402
msgid ""
"You cannot change a partition into an extended one or vice versa\n"
"Delete it first.\n"
msgstr ""
"Nemù¾ete mìnit bì¾né diskové oddíly na roz¹íøené a zpìt. Nejdøíve jej "
"sma¾te.\n"
#: fdisk/fdisk.c:1411
msgid ""
"Consider leaving partition 3 as Whole disk (5),\n"
"as SunOS/Solaris expects it and even Linux likes it.\n"
"\n"
msgstr ""
"Zva¾te zda by nebylo vhodné ponechat diskový oddíl 3 jako Celý disk (5),\n"
"nebo» SunOS/Solaris to oèekává a i Linux tomu dává pøednost.\n"
"\n"
#: fdisk/fdisk.c:1417
msgid ""
"Consider leaving partition 9 as volume header (0),\n"
"and partition 11 as entire volume (6)as IRIX expects it.\n"
"\n"
msgstr ""
"Zva¾te zda by nebylo vhodné ponechat diskový oddíl 9 jako hlavièku svazku "
"(0),\n"
"a diskový oddíl 11 jako celý svazek (6), nebo» IRIX to oèekává.\n"
"\n"
#: fdisk/fdisk.c:1430
#, c-format
msgid "Changed system type of partition %d to %x (%s)\n"
msgstr "Typ diskového oddílu %d byl zmìnìn na %x (%s).\n"
#: fdisk/fdisk.c:1485
#, c-format
msgid "Partition %d has different physical/logical beginnings (non-Linux?):\n"
msgstr ""
"Diskový oddíl %d má rozdílný fyzický a logický zaèátek (nelinuxový?):\n"
#: fdisk/fdisk.c:1487 fdisk/fdisk.c:1495 fdisk/fdisk.c:1504 fdisk/fdisk.c:1514
#, c-format
msgid " phys=(%d, %d, %d) "
msgstr " fyz=(%d, %d, %d) "
#: fdisk/fdisk.c:1488 fdisk/fdisk.c:1496
#, c-format
msgid "logical=(%d, %d, %d)\n"
msgstr "logický=(%d, %d, %d)\n"
#: fdisk/fdisk.c:1493
#, c-format
msgid "Partition %d has different physical/logical endings:\n"
msgstr "Diskový oddíl %d má rozdílný fyzický a logický konec:\n"
#: fdisk/fdisk.c:1502
#, c-format
msgid "Partition %i does not start on cylinder boundary:\n"
msgstr "Diskový oddíl %i nezaèíná na hranici cylindru:\n"
#: fdisk/fdisk.c:1505
#, c-format
msgid "should be (%d, %d, 1)\n"
msgstr "mìlo by být (%d, %d, 1)\n"
#: fdisk/fdisk.c:1511
#, fuzzy, c-format
msgid "Partition %i does not end on cylinder boundary.\n"
msgstr "Diskový oddíl %d nekonèí na hranici cylindru.\n"
#: fdisk/fdisk.c:1515
#, c-format
msgid "should be (%d, %d, %d)\n"
msgstr "mìlo by být (%d, %d, %d)\n"
#: fdisk/fdisk.c:1527
#, c-format
msgid ""
"\n"
"Disk %s: %ld MB, %lld bytes\n"
msgstr ""
#: fdisk/fdisk.c:1530
#, fuzzy, c-format
msgid ""
"\n"
"Disk %s: %ld.%ld GB, %lld bytes\n"
msgstr ""
"\n"
"Disk %s: hlav: %d, sektorù: %d, cylindrù: %d\n"
"\n"
#: fdisk/fdisk.c:1532
#, fuzzy, c-format
msgid "%d heads, %d sectors/track, %d cylinders"
msgstr ""
"\n"
"Disk %s: hlav: %d, sektorù: %d, cylindrù: %d\n"
"\n"
#: fdisk/fdisk.c:1535
#, c-format
msgid ", total %llu sectors"
msgstr ""
#: fdisk/fdisk.c:1538
#, c-format
msgid ""
"Units = %s of %d * %d = %d bytes\n"
"\n"
msgstr ""
#: fdisk/fdisk.c:1646
msgid ""
"Nothing to do. Ordering is correct already.\n"
"\n"
msgstr ""
"Diskové oddíly jsou ji¾ seøazeny.\n"
"\n"
#: fdisk/fdisk.c:1702
msgid ""
"This doesn't look like a partition table\n"
"Probably you selected the wrong device.\n"
"\n"
msgstr ""
#: fdisk/fdisk.c:1716
#, fuzzy, c-format
msgid "%*s Boot Start End Blocks Id System\n"
msgstr "%*s Boot Zaèátek Konec Bloky Id Systém\n"
#: fdisk/fdisk.c:1717 fdisk/fdisksgilabel.c:220 fdisk/fdisksunlabel.c:674
msgid "Device"
msgstr "Zaøízení"
#: fdisk/fdisk.c:1754
msgid ""
"\n"
"Partition table entries are not in disk order\n"
msgstr ""
"\n"
"Diskové oddíly jsou chybnì seøazeny\n"
#: fdisk/fdisk.c:1764
#, c-format
msgid ""
"\n"
"Disk %s: %d heads, %d sectors, %d cylinders\n"
"\n"
msgstr ""
"\n"
"Disk %s: hlav: %d, sektorù: %d, cylindrù: %d\n"
"\n"
#: fdisk/fdisk.c:1766
#, fuzzy
msgid "Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID\n"
msgstr "È AF Hd Sek Cyl Hd Sek Cyl Zaèátek Vel Id\n"
#: fdisk/fdisk.c:1811
#, c-format
msgid "Warning: partition %d contains sector 0\n"
msgstr "Varování: diskový oddíl %d obsahuje sektor 0\n"
#: fdisk/fdisk.c:1814
#, c-format
msgid "Partition %d: head %d greater than maximum %d\n"
msgstr "Diskový oddíl %d: hlava %d má vìt¹í èíslo ne¾ je maximum %d\n"
#: fdisk/fdisk.c:1817
#, c-format
msgid "Partition %d: sector %d greater than maximum %d\n"
msgstr "Diskový oddíl %d: sektor %d má vìt¹í èíslo ne¾ je maximum %d\n"
#: fdisk/fdisk.c:1820
#, c-format
msgid "Partitions %d: cylinder %d greater than maximum %d\n"
msgstr "Diskový oddíl %d: cylindr %d má vìt¹í èíslo ne¾ je maximum %d\n"
#: fdisk/fdisk.c:1824
#, c-format
msgid "Partition %d: previous sectors %d disagrees with total %d\n"
msgstr "Diskový oddíl %d: pøedchozí sektory %d nesouhlasí s úhrnem %d\n"
#: fdisk/fdisk.c:1856
#, c-format
msgid "Warning: bad start-of-data in partition %d\n"
msgstr "Varování: chybný poèátek dat v diskovém oddílu %d\n"
#: fdisk/fdisk.c:1864
#, c-format
msgid "Warning: partition %d overlaps partition %d.\n"
msgstr "Varování: diskový oddíl %d pøesahuje do diskového oddílu %d.\n"
#: fdisk/fdisk.c:1884
#, c-format
msgid "Warning: partition %d is empty\n"
msgstr "Varování: diskový oddíl %d je prázdný.\n"
#: fdisk/fdisk.c:1889
#, c-format
msgid "Logical partition %d not entirely in partition %d\n"
msgstr "Logický diskový oddíl %d pøesahuje mimo diskový oddíl %d.\n"
#: fdisk/fdisk.c:1895
#, fuzzy, c-format
msgid "Total allocated sectors %d greater than the maximum %lld\n"
msgstr "Celkový poèet alokovaných sektorù (%d) je vìt¹í ne¾ maximum (%d).\n"
#: fdisk/fdisk.c:1898
#, fuzzy, c-format
msgid "%lld unallocated sectors\n"
msgstr "nealokovaných sektorù: %d\n"
#: fdisk/fdisk.c:1913 fdisk/fdisksgilabel.c:629 fdisk/fdisksunlabel.c:503
#, c-format
msgid "Partition %d is already defined. Delete it before re-adding it.\n"
msgstr ""
"Diskový oddíl %d je ji¾ definován. Pøed opìtovným vytvoøením jej musíte\n"
"nejprve smazat.\n"
#: fdisk/fdisk.c:1940 fdisk/fdiskbsdlabel.c:284 fdisk/fdisksgilabel.c:647
#: fdisk/fdisksunlabel.c:518
#, c-format
msgid "First %s"
msgstr "První %s"
#: fdisk/fdisk.c:1955 fdisk/fdisksunlabel.c:559
#, c-format
msgid "Sector %d is already allocated\n"
msgstr "Sektor %d je ji¾ alokován\n"
#: fdisk/fdisk.c:1991
msgid "No free sectors available\n"
msgstr "Nejsou ¾ádné volné sektory.\n"
#: fdisk/fdisk.c:2000 fdisk/fdiskbsdlabel.c:291 fdisk/fdisksunlabel.c:570
#, c-format
msgid "Last %s or +size or +sizeM or +sizeK"
msgstr "Poslední %s èi +velikost èi +velikostM èi velikostK"
#: fdisk/fdisk.c:2065
msgid ""
"\tSorry - this fdisk cannot handle AIX disk labels.\n"
"\tIf you want to add DOS-type partitions, create\n"
"\ta new empty DOS partition table first. (Use o.)\n"
"\tWARNING: This will destroy the present disk contents.\n"
msgstr ""
#: fdisk/fdisk.c:2077 fdisk/fdiskbsdlabel.c:618
msgid "The maximum number of partitions has been created\n"
msgstr "Ji¾ bylo vytvoøeno maximální mno¾ství diskových oddílù.\n"
#: fdisk/fdisk.c:2085
msgid "You must delete some partition and add an extended partition first\n"
msgstr "Musíte nejprve nìkteré smazat a pøidat roz¹íøený diskový oddíl.\n"
#: fdisk/fdisk.c:2088
#, fuzzy
msgid "All logical partitions are in use\n"
msgstr "logické diskový oddíl jsou chybnì seøazeny"
#: fdisk/fdisk.c:2089
#, fuzzy
msgid "Adding a primary partition\n"
msgstr "Chybný primární diskový oddíl"
#: fdisk/fdisk.c:2094
#, c-format
msgid ""
"Command action\n"
" %s\n"
" p primary partition (1-4)\n"
msgstr ""
"Pøíkaz\n"
" %s\n"
" p primární diskový oddíl (1-4)\n"
#: fdisk/fdisk.c:2096
msgid "l logical (5 or over)"
msgstr "l logický diskový oddíl (5 nebo více)"
#: fdisk/fdisk.c:2096
msgid "e extended"
msgstr "e roz¹íøený diskový oddíl"
#: fdisk/fdisk.c:2115
#, c-format
msgid "Invalid partition number for type `%c'\n"
msgstr "Chybné èíslo diskového oddílu pro typ `%c'.\n"
#: fdisk/fdisk.c:2151
msgid ""
"The partition table has been altered!\n"
"\n"
msgstr "Tabulka rozdìlení disku byla zmìnìna!\n"
#: fdisk/fdisk.c:2160
msgid "Calling ioctl() to re-read partition table.\n"
msgstr "Volám ioctl() pro znovunaètení tabulky rozdìlení disku.\n"
#: fdisk/fdisk.c:2176
#, c-format
msgid ""
"\n"
"WARNING: Re-reading the partition table failed with error %d: %s.\n"
"The kernel still uses the old table.\n"
"The new table will be used at the next reboot.\n"
msgstr ""
#: fdisk/fdisk.c:2186
msgid ""
"\n"
"WARNING: If you have created or modified any DOS 6.x\n"
"partitions, please see the fdisk manual page for additional\n"
"information.\n"
msgstr ""
"\n"
"VAROVÁNÍ: Pokud jste vytvoøil èi zmìnil nìjaké\n"
"DOS 6.x diskové oddíly, pøeètìte si prosím manuálovou\n"
"stránku programu fdisk, abyste získal dodateèné informace.\n"
#: fdisk/fdisk.c:2193
msgid "Syncing disks.\n"
msgstr "Synchronizují se disky.\n"
#: fdisk/fdisk.c:2240
#, c-format
msgid "Partition %d has no data area\n"
msgstr "Diskový oddíl %d neobsahuje datovou oblast.\n"
#: fdisk/fdisk.c:2245
msgid "New beginning of data"
msgstr "Nový zaèátek dat"
#: fdisk/fdisk.c:2261
msgid "Expert command (m for help): "
msgstr "Pøíkaz pro odborníky (m pro nápovìdu): "
#: fdisk/fdisk.c:2274
msgid "Number of cylinders"
msgstr "Poèet cylindrù"
#: fdisk/fdisk.c:2301
msgid "Number of heads"
msgstr "Poèet hlav"
#: fdisk/fdisk.c:2326
msgid "Number of sectors"
msgstr "Poèet sektorù"
#: fdisk/fdisk.c:2329
msgid "Warning: setting sector offset for DOS compatiblity\n"
msgstr "Varování: nastaven posun sektoru kvùli kompatibilitì s DOSEM\n"
#: fdisk/fdisk.c:2401
#, c-format
msgid "Disk %s doesn't contain a valid partition table\n"
msgstr "Na disku %s není korektní tabulka rozdìlení disku.\n"
#: fdisk/fdisk.c:2412
#, c-format
msgid "Cannot open %s\n"
msgstr "%s nelze otevøít.\n"
#: fdisk/fdisk.c:2430 fdisk/sfdisk.c:2452
#, c-format
msgid "cannot open %s\n"
msgstr "%s nelze otevøít.\n"
#: fdisk/fdisk.c:2450
#, c-format
msgid "%c: unknown command\n"
msgstr "pøíkaz %c není znám\n"
#: fdisk/fdisk.c:2518
msgid "This kernel finds the sector size itself - -b option ignored\n"
msgstr ""
"Toto jádro detekuje velikost sektoru automaticky - pøepínaè -b ignorován\n"
#: fdisk/fdisk.c:2522
msgid ""
"Warning: the -b (set sector size) option should be used with one specified "
"device\n"
msgstr ""
"Varování: pøepínaè -b (nastavení velikosti sektoru) by mìl být pou¾it s "
"jedním\n"
" zadaným zaøízením.\n"
#. OSF label, and no DOS label
#: fdisk/fdisk.c:2581
#, fuzzy, c-format
msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n"
msgstr ""
"Na %s nalezen OSF/1 popis disku. Spou¹tím re¾im popisu disku.\n"
"Pro návrat do re¾imu DOS tabulky rozdìlení disku pou¾ijte pøíkaz 'r'.\n"
#: fdisk/fdisk.c:2591
msgid "Command (m for help): "
msgstr "Pøíkaz (m pro nápovìdu): "
#: fdisk/fdisk.c:2607
#, c-format
msgid ""
"\n"
"The current boot file is: %s\n"
msgstr ""
"\n"
"Aktuální startovací soubor: %s\n"
#: fdisk/fdisk.c:2609
msgid "Please enter the name of the new boot file: "
msgstr "Zadejte název nového startovacího souboru: "
#: fdisk/fdisk.c:2611
msgid "Boot file unchanged\n"
msgstr "Startovací soubor nebyl zmìnìn.\n"
#: fdisk/fdisk.c:2684
msgid ""
"\n"
"\tSorry, no experts menu for SGI partition tables available.\n"
"\n"
msgstr ""
"\n"
"\tPro SGI diskové oddíly nejsou k dispozici ¾ádné roz¹iøující funkce.\n"
"\n"
#: fdisk/fdiskaixlabel.c:27
msgid ""
"\n"
"\tThere is a valid AIX label on this disk.\n"
"\tUnfortunately Linux cannot handle these\n"
"\tdisks at the moment. Nevertheless some\n"
"\tadvice:\n"
"\t1. fdisk will destroy its contents on write.\n"
"\t2. Be sure that this disk is NOT a still vital\n"
"\t part of a volume group. (Otherwise you may\n"
"\t erase the other disks as well, if unmirrored.)\n"
"\t3. Before deleting this physical volume be sure\n"
"\t to remove the disk logically from your AIX\n"
"\t machine. (Otherwise you become an AIXpert)."
msgstr ""
"\n"
"\tNa tomto disku je AIX tabulka rozdìlení disku.\n"
"\tLinux s tìmito disky v souèasné dobì neumí pracovat.\n"
"\tNicménì nìkolik rad pro Vás:\n"
"\t1. pøi zápisu fdisk znièí jejich obsah\n"
"\t2. Ujistìte se, ¾e tento disk NENÍ dùle¾itou souèástí\n"
"\t skupiny svazkù. (Jinak mù¾ete smazat, pokud nejsou\n"
"\t zrcadleny, i ostatní disky.)\n"
"\t3. Pøedtím, ne¾ sma¾ete fyzický svazek, se ujistìte, ¾e\n"
"\t ji¾ není logickou souèástí Va¹eho AIX systému. (Jinak\n"
"\t se z Vás stává AIXpert)."
#: fdisk/fdiskbsdlabel.c:122
#, c-format
msgid ""
"\n"
"BSD label for device: %s\n"
msgstr ""
"\n"
"BSD tabulka rozdìlení disku pro zaøízení: %s\n"
#: fdisk/fdiskbsdlabel.c:130
msgid " d delete a BSD partition"
msgstr " d smazat BSD diskový oddíl"
#: fdisk/fdiskbsdlabel.c:131
msgid " e edit drive data"
msgstr " e upravovat data na disku"
#: fdisk/fdiskbsdlabel.c:132
msgid " i install bootstrap"
msgstr " i instalovat zavadìè"
#: fdisk/fdiskbsdlabel.c:133
msgid " l list known filesystem types"
msgstr " l vypsat známé typy systémù souborù"
#: fdisk/fdiskbsdlabel.c:135
msgid " n add a new BSD partition"
msgstr " n vytvoøit nový BSD diskový oddíl"
#: fdisk/fdiskbsdlabel.c:136
msgid " p print BSD partition table"
msgstr " p vytisknout BSD tabulku rozdìlení disku"
#: fdisk/fdiskbsdlabel.c:139
msgid " s show complete disklabel"
msgstr " s zobrazí úplný popis disku"
#: fdisk/fdiskbsdlabel.c:140
msgid " t change a partition's filesystem id"
msgstr " t zmìní id systému souborù daného diskového oddílu"
#: fdisk/fdiskbsdlabel.c:141
msgid " u change units (cylinders/sectors)"
msgstr " u zmìní jednotky (cylindry/sektory)"
#: fdisk/fdiskbsdlabel.c:142
msgid " w write disklabel to disk"
msgstr " w ulo¾í popis disku na disk"
#: fdisk/fdiskbsdlabel.c:144
msgid " x link BSD partition to non-BSD partition"
msgstr " x pøipojí BSD diskový oddíl na ne-BSD diskový oddíl"
#: fdisk/fdiskbsdlabel.c:176
#, c-format
msgid "Partition %s has invalid starting sector 0.\n"
msgstr "Diskový oddíl %s má chybný poèáteèní sektor 0.\n"
#: fdisk/fdiskbsdlabel.c:180
#, c-format
msgid "Reading disklabel of %s at sector %d.\n"
msgstr "Ètu popis disku %s v sektoru %d.\n"
#: fdisk/fdiskbsdlabel.c:190
#, c-format
msgid "There is no *BSD partition on %s.\n"
msgstr "Na %s se nenachází ¾ádný *BSD diskový oddíl.\n"
#: fdisk/fdiskbsdlabel.c:204
msgid "BSD disklabel command (m for help): "
msgstr "Pøíkaz pro BSD popis disku (m pro nápovìdu): "
#: fdisk/fdiskbsdlabel.c:318
#, c-format
msgid "type: %s\n"
msgstr "typ: %s\n"
#: fdisk/fdiskbsdlabel.c:320
#, c-format
msgid "type: %d\n"
msgstr "typ: %d\n"
#: fdisk/fdiskbsdlabel.c:321
#, c-format
msgid "disk: %.*s\n"
msgstr "disk: %.*s\n"
#: fdisk/fdiskbsdlabel.c:322
#, c-format
msgid "label: %.*s\n"
msgstr "tabulka: %.*s\n"
#: fdisk/fdiskbsdlabel.c:323
msgid "flags:"
msgstr "pøíznaky:"
#: fdisk/fdiskbsdlabel.c:325
msgid " removable"
msgstr " výmìnný"
# ???
#: fdisk/fdiskbsdlabel.c:327
msgid " ecc"
msgstr " ecc"
#: fdisk/fdiskbsdlabel.c:329
msgid " badsect"
msgstr " chybnýsekt"
#. On various machines the fields of *lp are short/int/long
#. In order to avoid problems, we cast them all to long.
#: fdisk/fdiskbsdlabel.c:333
#, c-format
msgid "bytes/sector: %ld\n"
msgstr "bajtù/sektor: %ld\n"
#: fdisk/fdiskbsdlabel.c:334
#, c-format
msgid "sectors/track: %ld\n"
msgstr "sektorù/stopu: %ld\n"
#: fdisk/fdiskbsdlabel.c:335
#, c-format
msgid "tracks/cylinder: %ld\n"
msgstr "stop/cylindr: %ld\n"
#: fdisk/fdiskbsdlabel.c:336
#, c-format
msgid "sectors/cylinder: %ld\n"
msgstr "sektorù/cylindr: %ld\n"
#: fdisk/fdiskbsdlabel.c:337
#, c-format
msgid "cylinders: %ld\n"
msgstr "cylindrù: %ld\n"
#: fdisk/fdiskbsdlabel.c:338
#, c-format
msgid "rpm: %d\n"
msgstr "otm: %d\n"
# *skew ???
# zde pøeklad spí¹e odhaduji
#: fdisk/fdiskbsdlabel.c:339
#, c-format
msgid "interleave: %d\n"
msgstr "interleave: %d\n"
#: fdisk/fdiskbsdlabel.c:340
#, c-format
msgid "trackskew: %d\n"
msgstr "zakøivení stopy: %d\n"
#: fdisk/fdiskbsdlabel.c:341
#, c-format
msgid "cylinderskew: %d\n"
msgstr "zakøivení cylindru: %d\n"
#: fdisk/fdiskbsdlabel.c:342
#, c-format
msgid "headswitch: %ld\t\t# milliseconds\n"
msgstr "pøesun hlavy: %ld\t\t# milisekund\n"
#: fdisk/fdiskbsdlabel.c:344
#, c-format
msgid "track-to-track seek: %ld\t# milliseconds\n"
msgstr "posun stopa-stopa: %ld\t# milisekund\n"
#: fdisk/fdiskbsdlabel.c:346
msgid "drivedata: "
msgstr "diskdata: "
#: fdisk/fdiskbsdlabel.c:355
#, c-format
msgid ""
"\n"
"%d partitions:\n"
msgstr ""
"\n"
"poèet diskových oddílù - %d:\n"
#: fdisk/fdiskbsdlabel.c:356
msgid "# start end size fstype [fsize bsize cpg]\n"
msgstr "# velik konec velikost sstyp [fsize bsize cpg]\n"
#: fdisk/fdiskbsdlabel.c:405 fdisk/fdiskbsdlabel.c:408
#, c-format
msgid "Writing disklabel to %s.\n"
msgstr "Ukládám popis disku na %s.\n"
#: fdisk/fdiskbsdlabel.c:420 fdisk/fdiskbsdlabel.c:422
#, c-format
msgid "%s contains no disklabel.\n"
msgstr "Na %s se nenachází ¾ádný popis disku.\n"
#: fdisk/fdiskbsdlabel.c:427
msgid "Do you want to create a disklabel? (y/n) "
msgstr "Chcete vytvoøit popis disku? (y/n)"
#: fdisk/fdiskbsdlabel.c:467
msgid "bytes/sector"
msgstr "bajtù/sektor"
#: fdisk/fdiskbsdlabel.c:468
msgid "sectors/track"
msgstr "sektorù/stopu"
#: fdisk/fdiskbsdlabel.c:469
msgid "tracks/cylinder"
msgstr "stop/cylindr"
#: fdisk/fdiskbsdlabel.c:477
msgid "sectors/cylinder"
msgstr "sektorù/cylindr"
#: fdisk/fdiskbsdlabel.c:481
msgid "Must be <= sectors/track * tracks/cylinder (default).\n"
msgstr "Musí být <= sektorù/stopu * stop/cylindr (implicitní).\n"
#: fdisk/fdiskbsdlabel.c:483
msgid "rpm"
msgstr "otm"
#: fdisk/fdiskbsdlabel.c:484
msgid "interleave"
msgstr "interleave"
#: fdisk/fdiskbsdlabel.c:485
msgid "trackskew"
msgstr "zakøivení stopy"
#: fdisk/fdiskbsdlabel.c:486
msgid "cylinderskew"
msgstr "zakøivení cylindru"
#: fdisk/fdiskbsdlabel.c:487
msgid "headswitch"
msgstr "pøesun hlavy"
#: fdisk/fdiskbsdlabel.c:488
msgid "track-to-track seek"
msgstr "posun stopa-stopa"
#: fdisk/fdiskbsdlabel.c:529
#, c-format
msgid "Bootstrap: %sboot -> boot%s (%s): "
msgstr "Zavadìè: %sstart -> start%s (%s): "
#: fdisk/fdiskbsdlabel.c:554
msgid "Bootstrap overlaps with disk label!\n"
msgstr "Zavadìè pøesahuje do tabulky rozdìlení disku!\n"
#: fdisk/fdiskbsdlabel.c:575 fdisk/fdiskbsdlabel.c:577
#, c-format
msgid "Bootstrap installed on %s.\n"
msgstr "Zavadìè instalován na %s.\n"
#: fdisk/fdiskbsdlabel.c:599
#, c-format
msgid "Partition (a-%c): "
msgstr "Diskový oddíl (a-%c): "
#: fdisk/fdiskbsdlabel.c:630
msgid "This partition already exists.\n"
msgstr "Tento diskový oddíl ji¾ existuje.\n"
#: fdisk/fdiskbsdlabel.c:756
#, c-format
msgid "Warning: too many partitions (%d, maximum is %d).\n"
msgstr "Varování: pøíli¹ mnoho diskových oddílù (%d, maximum %d).\n"
#: fdisk/fdiskbsdlabel.c:804
msgid ""
"\n"
"Syncing disks.\n"
msgstr ""
"\n"
"Synchronizují se disky.\n"
#: fdisk/fdisksgilabel.c:80
msgid "SGI volhdr"
msgstr "Hlavièka SGI svazku"
#: fdisk/fdisksgilabel.c:81
msgid "SGI trkrepl"
msgstr "SGI trkrepl"
#: fdisk/fdisksgilabel.c:82
msgid "SGI secrepl"
msgstr "SGI secrepl"
#: fdisk/fdisksgilabel.c:83
msgid "SGI raw"
msgstr "SGI raw"
#: fdisk/fdisksgilabel.c:84
msgid "SGI bsd"
msgstr "SGI bsd"
#: fdisk/fdisksgilabel.c:85
msgid "SGI sysv"
msgstr "SGI sysv"
#: fdisk/fdisksgilabel.c:86
msgid "SGI volume"
msgstr "SGI svazek"
#: fdisk/fdisksgilabel.c:87
msgid "SGI efs"
msgstr "SGI efs"
#: fdisk/fdisksgilabel.c:88
msgid "SGI lvol"
msgstr "SGI lvol"
#: fdisk/fdisksgilabel.c:89
msgid "SGI rlvol"
msgstr "SGI rlvol"
#: fdisk/fdisksgilabel.c:90
msgid "SGI xfs"
msgstr "SGI xfs"
#: fdisk/fdisksgilabel.c:91
msgid "SGI xfslog"
msgstr "SGI xfslog"
#: fdisk/fdisksgilabel.c:92
msgid "SGI xlv"
msgstr "SGI xlv"
#: fdisk/fdisksgilabel.c:93
msgid "SGI xvm"
msgstr "SGI xvm"
#: fdisk/fdisksgilabel.c:94 fdisk/fdisksunlabel.c:53
msgid "Linux swap"
msgstr "Linux swap"
#: fdisk/fdisksgilabel.c:95 fdisk/fdisksunlabel.c:54
msgid "Linux native"
msgstr "Linux nativní"
#: fdisk/fdisksgilabel.c:96 fdisk/fdisksunlabel.c:55 fdisk/i386_sys_types.c:62
msgid "Linux LVM"
msgstr "Linux LVM"
#: fdisk/fdisksgilabel.c:97
msgid "Linux RAID"
msgstr "Linux RAID"
#: fdisk/fdisksgilabel.c:163
msgid ""
"According to MIPS Computer Systems, Inc the Label must not contain more than "
"512 bytes\n"
msgstr ""
"Popis nesmí podle MIPS Computer Systems, Inc obsahovat více ne¾ 512 bajtù\n"
#: fdisk/fdisksgilabel.c:182
msgid "Detected sgi disklabel with wrong checksum.\n"
msgstr "Nalezl jsem sgi popis disku s chybným kontrolním souètem.\n"
#: fdisk/fdisksgilabel.c:200
#, c-format
msgid ""
"\n"
"Disk %s (SGI disk label): %d heads, %d sectors\n"
"%d cylinders, %d physical cylinders\n"
"%d extra sects/cyl, interleave %d:1\n"
"%s\n"
"Units = %s of %d * 512 bytes\n"
"\n"
msgstr ""
"\n"
"Disk %s (SGI tabulka rozdìlení disku): hlav: %d, sektorù: %d,\n"
"cylindrù: %d, fyzických cylindrù: %d\n"
"extra sektorù/cyl: %d, interleave: %d:1\n"
"%s\n"
"Jednotky = %s po %d * 512 bajtech\n"
"\n"
#: fdisk/fdisksgilabel.c:212
#, c-format
msgid ""
"\n"
"Disk %s (SGI disk label): %d heads, %d sectors, %d cylinders\n"
"Units = %s of %d * 512 bytes\n"
"\n"
msgstr ""
"\n"
"Disk %s (SGI tabulka rozdìlení disku): hlav: %d, sektorù: %d, cylindrù: %d\n"
"Jednotky = %s po %d * 512 bajtech\n"
"\n"
#: fdisk/fdisksgilabel.c:218
#, c-format
msgid ""
"----- partitions -----\n"
"Pt# %*s Info Start End Sectors Id System\n"
msgstr ""
"----- diskové oddíly -----\n"
"Od# %*s Info Zaèátek Konec Sektory Id Systém\n"
#: fdisk/fdisksgilabel.c:240
#, c-format
msgid ""
"----- Bootinfo -----\n"
"Bootfile: %s\n"
"----- Directory Entries -----\n"
msgstr ""
"----- bootinfo -----\n"
"Startovací soubor: %s\n"
"----- adresáøové polo¾ky -----\n"
#: fdisk/fdisksgilabel.c:248
#, c-format
msgid "%2d: %-10s sector%5u size%8u\n"
msgstr "%2d: %-10s sektor%5u velikost%8u\n"
#. "/a\n" is minimum
#: fdisk/fdisksgilabel.c:302
msgid ""
"\n"
"Invalid Bootfile!\n"
"\tThe bootfile must be an absolute non-zero pathname,\n"
"\te.g. \"/unix\" or \"/unix.save\".\n"
msgstr ""
"\n"
"Chybný startovací soubor!\n"
"\tStartovací soubor musí být zadán plným názvem, napø.\n"
"\t\"/unix\" èi \"/unix.save\".\n"
#: fdisk/fdisksgilabel.c:308
msgid ""
"\n"
"\tName of Bootfile too long: 16 bytes maximum.\n"
msgstr ""
"\n"
"\tNázev startovacího souboru je pøíli¹ dlouhý: 16 bajtù je maximum.\n"
#: fdisk/fdisksgilabel.c:313
msgid ""
"\n"
"\tBootfile must have a fully qualified pathname.\n"
msgstr ""
"\n"
"\tStartovací soubor musí být zadán plným názvem.\n"
#: fdisk/fdisksgilabel.c:320
msgid ""
"\n"
"\tBe aware, that the bootfile is not checked for existence.\n"
"\tSGI's default is \"/unix\" and for backup \"/unix.save\".\n"
msgstr ""
"\n"
"Uvìdomte si, ¾e existence startovacího souboru není ovìøována.\n"
"\tImplicitnì se pou¾ije \"/unix\" a jako záloha \"/unix.save\".\n"
#: fdisk/fdisksgilabel.c:346
#, c-format
msgid ""
"\n"
"\tBootfile is changed to \"%s\".\n"
msgstr ""
"\n"
"\tStartovací soubor byl zmìnìn na \"%s\".\n"
#: fdisk/fdisksgilabel.c:436
msgid "More than one entire disk entry present.\n"
msgstr "Existuje více ne¾ jedna polo¾ka celého disku.\n"
#: fdisk/fdisksgilabel.c:443 fdisk/fdisksunlabel.c:479
msgid "No partitions defined\n"
msgstr "Nejsou definovány ¾ádné diskové oddíly\n"
#: fdisk/fdisksgilabel.c:449
msgid "IRIX likes when Partition 11 covers the entire disk.\n"
msgstr "IRIX preferuje, kdy¾ Diskový oddíl 11 zaujímá celý disk.\n"
#: fdisk/fdisksgilabel.c:451
#, c-format
msgid ""
"The entire disk partition should start at block 0,\n"
"not at diskblock %d.\n"
msgstr ""
"Diskový oddíl zaujímající celý disk by mìl zaèínat blokem 0,\n"
"nikoliv blokem %d.\n"
#: fdisk/fdisksgilabel.c:457
#, c-format
msgid ""
"The entire disk partition is only %d diskblock large,\n"
"but the disk is %d diskblocks long.\n"
msgstr ""
"Diskový oddíl zaujímající celý disk má velikost v blocích pouze %d,\n"
"ale velikost disku v blocích je %d.\n"
#: fdisk/fdisksgilabel.c:463
msgid "One Partition (#11) should cover the entire disk.\n"
msgstr "Jeden Diskový Oddíl (#11) by mìl zaujímat celý disk.\n"
#: fdisk/fdisksgilabel.c:473
#, c-format
msgid "Partition %d does not start on cylinder boundary.\n"
msgstr "Diskový oddíl %d nezaèíná na hranici cylindru.\n"
#: fdisk/fdisksgilabel.c:479
#, c-format
msgid "Partition %d does not end on cylinder boundary.\n"
msgstr "Diskový oddíl %d nekonèí na hranici cylindru.\n"
#: fdisk/fdisksgilabel.c:486
#, c-format
msgid "The Partition %d and %d overlap by %d sectors.\n"
msgstr "Diskové oddíly %d a %d se navzájem pøekrývají %d sektory.\n"
#: fdisk/fdisksgilabel.c:494 fdisk/fdisksgilabel.c:512
#, fuzzy, c-format
msgid "Unused gap of %8u sectors - sectors %8u-%u\n"
msgstr "Nevyu¾ívaný prostor o velikosti v sektorech %8d - sektory %8d-%d\n"
#: fdisk/fdisksgilabel.c:523
msgid ""
"\n"
"The boot partition does not exist.\n"
msgstr ""
"\n"
"Startovací diskový oddíl neexistuje.\n"
#: fdisk/fdisksgilabel.c:526
msgid ""
"\n"
"The swap partition does not exist.\n"
msgstr ""
"\n"
"Diskový oddíl pro odkládací prostor neexistuje.\n"
#: fdisk/fdisksgilabel.c:530
msgid ""
"\n"
"The swap partition has no swap type.\n"
msgstr ""
"\n"
"Diskový oddíl pro odkládací prostor nemá zadán typ.\n"
#: fdisk/fdisksgilabel.c:533
msgid "\tYou have chosen an unusual boot file name.\n"
msgstr "\tVybral jste si neobvyklý název pro startovací soubor.\n"
#. caught already before, ...
#: fdisk/fdisksgilabel.c:542
msgid "Sorry You may change the Tag of non-empty partitions.\n"
msgstr "Lituji, mù¾ete mìnit znaèku neprázdných diskových oddílù.\n"
#: fdisk/fdisksgilabel.c:548
msgid ""
"It is highly recommended that the partition at offset 0\n"
"is of type \"SGI volhdr\", the IRIX system will rely on it to\n"
"retrieve from its directory standalone tools like sash and fx.\n"
"Only the \"SGI volume\" entire disk section may violate this.\n"
"Type YES if you are sure about tagging this partition differently.\n"
msgstr ""
"Doporuèuje se, aby diskový oddíl zaèínající na posunu 0 byl typu\n"
"\"SGI volhdr\". IRIX jej pou¾ívá k pøístupu k nástrojùm jako je sash\n"
"a fx. Vyjímkou je pouze \"SGI svazek\" zaujímající celý disk.\n"
"Zadejte YES, pokud jste si jist, ¾e chcete oznaèit tento diskový oddíl "
"jinak.\n"
#: fdisk/fdisksgilabel.c:553 fdisk/fdisksunlabel.c:628
msgid "YES\n"
msgstr ""
#. rebuild freelist
#: fdisk/fdisksgilabel.c:577
msgid "Do You know, You got a partition overlap on the disk?\n"
msgstr "Víte, ¾e na Va¹em disku se diskové oddíly pøekrývají?\n"
#: fdisk/fdisksgilabel.c:635
msgid "Attempting to generate entire disk entry automatically.\n"
msgstr "Pokou¹ím se automaticky vytvoøit polo¾ku pro celý disk.\n"
#: fdisk/fdisksgilabel.c:640
msgid "The entire disk is already covered with partitions.\n"
msgstr "Diskové oddíly ji¾ zabírají celý prostor disky.\n"
#: fdisk/fdisksgilabel.c:644
msgid "You got a partition overlap on the disk. Fix it first!\n"
msgstr "Diskové oddíly se pøekrývají. Nejprve to opravte!\n"
#: fdisk/fdisksgilabel.c:653 fdisk/fdisksgilabel.c:682
msgid ""
"It is highly recommended that eleventh partition\n"
"covers the entire disk and is of type `SGI volume'\n"
msgstr ""
"Doporuèuje se, aby jedenáctý diskový oddíl zaujímal celý\n"
"prostor disku a byl typu `SGI svazek'\n"
#: fdisk/fdisksgilabel.c:669
msgid "You will get a partition overlap on the disk. Fix it first!\n"
msgstr ""
"Takto se diskové oddíly budou navzájem pøekrývat. Nejprve to opravte!\n"
#: fdisk/fdisksgilabel.c:674
#, c-format
msgid " Last %s"
msgstr " Poslední %s"
#: fdisk/fdisksgilabel.c:704
msgid ""
"Building a new SGI disklabel. Changes will remain in memory only,\n"
"until you decide to write them. After that, of course, the previous\n"
"content will be unrecoverably lost.\n"
"\n"
msgstr ""
"Vytváøím nový SGI popis disku. Zmìny budou ulo¾eny pouze do pamìti,\n"
"dokud se nerozhodnete je ulo¾it na disk. Poté ji¾ nebudou stará data\n"
"pochopitelnì dostupná.\n"
"\n"
#: fdisk/fdisksgilabel.c:726
#, c-format
msgid ""
"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %"
"d.\n"
"This value may be truncated for devices > 33.8 GB.\n"
msgstr ""
#: fdisk/fdisksgilabel.c:739
#, c-format
msgid "Trying to keep parameters of partition %d.\n"
msgstr "Pokou¹ím se zachovat parametry diskového oddílu %d.\n"
#: fdisk/fdisksgilabel.c:741
#, c-format
msgid "ID=%02x\tSTART=%d\tLENGTH=%d\n"
msgstr "ID=%02x\tZAÈÁTEK=%d\tDÉLKA=%d\n"
#: fdisk/fdisksunlabel.c:44 fdisk/i386_sys_types.c:6
msgid "Empty"
msgstr "Prázdný prostor"
#: fdisk/fdisksunlabel.c:46
msgid "SunOS root"
msgstr "SunOS root"
#: fdisk/fdisksunlabel.c:47
msgid "SunOS swap"
msgstr "SunOS swap"
#: fdisk/fdisksunlabel.c:48
msgid "SunOS usr"
msgstr "SunOS usr"
#: fdisk/fdisksunlabel.c:49
msgid "Whole disk"
msgstr "Celý disk"
#: fdisk/fdisksunlabel.c:50
msgid "SunOS stand"
msgstr "SunOS stand"
#: fdisk/fdisksunlabel.c:51
msgid "SunOS var"
msgstr "SunOS var"
#: fdisk/fdisksunlabel.c:52
msgid "SunOS home"
msgstr "SunOS home"
#. DOS 3.3+ secondary
#: fdisk/fdisksunlabel.c:56 fdisk/i386_sys_types.c:99
msgid "Linux raid autodetect"
msgstr "Linux raid autodetect"
#: fdisk/fdisksunlabel.c:133
msgid ""
"Detected sun disklabel with wrong checksum.\n"
"Probably you'll have to set all the values,\n"
"e.g. heads, sectors, cylinders and partitions\n"
"or force a fresh label (s command in main menu)\n"
msgstr ""
"Nalezl jsem sun popis disku s chybných kontrolním souètem.\n"
"Pravdìpodobnì budete muset nastavit v¹echny hodnoty jako hlavy, sektory,\n"
"cylindry a diskové oddíly, nebo vytvoøit novou tabulku (pøíkaz s v hlavní\n"
"nabídce)\n"
#: fdisk/fdisksunlabel.c:232
#, c-format
msgid "Autoconfigure found a %s%s%s\n"
msgstr "Automatická konfigurace nalezla %s%s%s\n"
#: fdisk/fdisksunlabel.c:259
msgid ""
"Building a new sun disklabel. Changes will remain in memory only,\n"
"until you decide to write them. After that, of course, the previous\n"
"content won't be recoverable.\n"
"\n"
msgstr ""
"Vytváøím novou sun popis disku. Zmìny budou ulo¾eny pouze do pamìti,\n"
"dokud se nerozhodnete je ulo¾it na disk. Poté ji¾ nebudou stará data\n"
"pochopitelnì dostupná.\n"
#: fdisk/fdisksunlabel.c:270
msgid ""
"Drive type\n"
" ? auto configure\n"
" 0 custom (with hardware detected defaults)"
msgstr ""
"Typ disku\n"
" ? automatická konfigurace\n"
" 0 u¾ivatelská konfigurace (s detekovaným implicitním nastavením)"
#: fdisk/fdisksunlabel.c:280
msgid "Select type (? for auto, 0 for custom): "
msgstr "Zadejte typ (? pro auto, 0 pro u¾ivatelský): "
#: fdisk/fdisksunlabel.c:292
msgid "Autoconfigure failed.\n"
msgstr "Automatická konfigurace selhala.\n"
#: fdisk/fdisksunlabel.c:316
msgid "Sectors/track"
msgstr "Sektorù/stopu"
#: fdisk/fdisksunlabel.c:323
msgid "Alternate cylinders"
msgstr "Alternativní cylindry"
#: fdisk/fdisksunlabel.c:326
msgid "Physical cylinders"
msgstr "Fyzické cylindry"
#: fdisk/fdisksunlabel.c:329 fdisk/fdisksunlabel.c:724
msgid "Rotation speed (rpm)"
msgstr "Rychlost otáèení (otm)"
#: fdisk/fdisksunlabel.c:331 fdisk/fdisksunlabel.c:717
msgid "Interleave factor"
msgstr "Interleave faktor"
#: fdisk/fdisksunlabel.c:334 fdisk/fdisksunlabel.c:710
msgid "Extra sectors per cylinder"
msgstr "Extra sektory na cylindr"
#: fdisk/fdisksunlabel.c:348
msgid "You may change all the disk params from the x menu"
msgstr "V¹echny parametry disku mù¾ete zmìnit z nabídky x"
#: fdisk/fdisksunlabel.c:355
msgid "3,5\" floppy"
msgstr "3,5\" pru¾ný disk"
#: fdisk/fdisksunlabel.c:355
msgid "Linux custom"
msgstr "Linux u¾ivatelský"
#: fdisk/fdisksunlabel.c:442
#, c-format
msgid "Partition %d doesn't end on cylinder boundary\n"
msgstr "Diskový oddíl %d nekonèí na hranici cylindru.\n"
#: fdisk/fdisksunlabel.c:462
#, c-format
msgid "Partition %d overlaps with others in sectors %d-%d\n"
msgstr "Diskový oddíl %d pøesahuje do jiných v sektorech %d-%d\n"
#: fdisk/fdisksunlabel.c:484
#, c-format
msgid "Unused gap - sectors 0-%d\n"
msgstr "Nevyu¾ívaný prostor - sektory 0-%d\n"
#: fdisk/fdisksunlabel.c:486 fdisk/fdisksunlabel.c:490
#, c-format
msgid "Unused gap - sectors %d-%d\n"
msgstr "Nevyu¾ívaný prostor - sektory %d-%d\n"
#: fdisk/fdisksunlabel.c:513
msgid ""
"Other partitions already cover the whole disk.\n"
"Delete some/shrink them before retry.\n"
msgstr ""
"Jiné diskové oddíly ji¾ zaujímá celý disk.\n"
"Sma¾te/zmen¹ete nìjaké a zkuste to znovu.\n"
#: fdisk/fdisksunlabel.c:589
#, c-format
msgid ""
"You haven't covered the whole disk with the 3rd partition, but your value\n"
"%d %s covers some other partition. Your entry has been changed\n"
"to %d %s\n"
msgstr ""
"Tøetí diskový oddíl nezabírá celý disk, ale va¹e hodnota %d %s\n"
"zaujímá jiné diskové oddíly. Va¹e polo¾ka byla zmìnìna na %d %s.\n"
#: fdisk/fdisksunlabel.c:611
#, c-format
msgid ""
"If you want to maintain SunOS/Solaris compatibility, consider leaving this\n"
"partition as Whole disk (5), starting at 0, with %u sectors\n"
msgstr ""
"Pokud chcete zachovat kompatibilitu se SunOS/Solarisem, zva¾te ponechání\n"
"tohoto diskového oddílu jako Celého disku (5), zaèínajícího na 0 o délce\n"
"v sektorech %u\n"
#: fdisk/fdisksunlabel.c:623
msgid ""
"It is highly recommended that the partition at offset 0\n"
"is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n"
"there may destroy your partition table and bootblock.\n"
"Type YES if you're very sure you would like that partition\n"
"tagged with 82 (Linux swap): "
msgstr ""
"Doporuèuje se, aby diskový oddíl zaèínající na posunu 0 byl typu\n"
"UFS, EXT2FS èi SunOS swap. Vytvoøení odkládacího prostoru pro Linux\n"
"na tomto místì by mohlo znièit tabulku rozdìlení disku a startovací blok.\n"
"Zadejte YES, pokud jste si jist, ¾e chcete tento diskový oddíl oznaèit 82\n"
"(odkládací prostor pro Linux): "
#: fdisk/fdisksunlabel.c:654
#, c-format
msgid ""
"\n"
"Disk %s (Sun disk label): %d heads, %d sectors, %d rpm\n"
"%d cylinders, %d alternate cylinders, %d physical cylinders\n"
"%d extra sects/cyl, interleave %d:1\n"
"%s\n"
"Units = %s of %d * 512 bytes\n"
"\n"
msgstr ""
"\n"
"Disk %s (Sun tabulka rozdìlení disku): hlav: %d, sektorù: %d, otm: %d,\n"
"cylindrù: %d, alternativních cylindrù: %d, fyzických cylindrù: %d\n"
"extra sektorù/cyl: %d, interleave: %d:1\n"
"%s\n"
"Jednotky = %s po %d * 512 bajtech\n"
"\n"
#: fdisk/fdisksunlabel.c:668
#, c-format
msgid ""
"\n"
"Disk %s (Sun disk label): %d heads, %d sectors, %d cylinders\n"
"Units = %s of %d * 512 bytes\n"
"\n"
msgstr ""
"\n"
"Disk %s (Sun tabulka rozdìlení disku): hlav: %d, sektorù: %d, cylindrù: %d\n"
"Jednotky = %s po %d * 512 bajtech\n"
"\n"
#: fdisk/fdisksunlabel.c:673
#, c-format
msgid "%*s Flag Start End Blocks Id System\n"
msgstr "%*s Pøíznak Zaèátek Konec Bloky Id Systém\n"
#: fdisk/fdisksunlabel.c:698
msgid "Number of alternate cylinders"
msgstr "Poèet alternativních cylindrù"
#: fdisk/fdisksunlabel.c:731
msgid "Number of physical cylinders"
msgstr "Poèet fyzických cylindrù"
#: fdisk/i386_sys_types.c:7
msgid "FAT12"
msgstr "FAT12"
#: fdisk/i386_sys_types.c:8
msgid "XENIX root"
msgstr "XENIX root"
#: fdisk/i386_sys_types.c:9
msgid "XENIX usr"
msgstr "XENIX usr"
#: fdisk/i386_sys_types.c:10
msgid "FAT16 <32M"
msgstr "FAT16 <32M"
#: fdisk/i386_sys_types.c:11
msgid "Extended"
msgstr "Roz¹íøený"
#. DOS 3.3+ extended partition
#: fdisk/i386_sys_types.c:12
msgid "FAT16"
msgstr "FAT16"
#. DOS 16-bit >=32M
#: fdisk/i386_sys_types.c:13
msgid "HPFS/NTFS"
msgstr "HPFS/NTFS"
#. OS/2 IFS, eg, HPFS or NTFS or QNX
#: fdisk/i386_sys_types.c:14
msgid "AIX"
msgstr "AIX"
#. AIX boot (AIX -- PS/2 port) or SplitDrive
#: fdisk/i386_sys_types.c:15
msgid "AIX bootable"
msgstr "AIX startovací"
#. AIX data or Coherent
#: fdisk/i386_sys_types.c:16
msgid "OS/2 Boot Manager"
msgstr "OS/2 Boot Manager"
#. OS/2 Boot Manager
#: fdisk/i386_sys_types.c:17
#, fuzzy
msgid "W95 FAT32"
msgstr "Win95 FAT32"
#: fdisk/i386_sys_types.c:18
#, fuzzy
msgid "W95 FAT32 (LBA)"
msgstr "Win95 FAT32 (LBA)"
#. LBA really is `Extended Int 13h'
#: fdisk/i386_sys_types.c:19
#, fuzzy
msgid "W95 FAT16 (LBA)"
msgstr "Win95 FAT16 (LBA)"
#: fdisk/i386_sys_types.c:20
#, fuzzy
msgid "W95 Ext'd (LBA)"
msgstr "Win95 Ext'd (LBA)"
#: fdisk/i386_sys_types.c:21
msgid "OPUS"
msgstr "OPUS"
#: fdisk/i386_sys_types.c:22
msgid "Hidden FAT12"
msgstr "Skrytá FAT12"
#: fdisk/i386_sys_types.c:23
msgid "Compaq diagnostics"
msgstr "Compaq diagnostics"
#: fdisk/i386_sys_types.c:24
msgid "Hidden FAT16 <32M"
msgstr "Skrytá FAT16 <32M"
#: fdisk/i386_sys_types.c:25
msgid "Hidden FAT16"
msgstr "Skrytá FAT16"
#: fdisk/i386_sys_types.c:26
msgid "Hidden HPFS/NTFS"
msgstr "Skrytá HPFS/NTFS"
#: fdisk/i386_sys_types.c:27
msgid "AST SmartSleep"
msgstr "AST SmartSleep"
#: fdisk/i386_sys_types.c:28
#, fuzzy
msgid "Hidden W95 FAT32"
msgstr "Skrytá Win95 FAT32"
#: fdisk/i386_sys_types.c:29
#, fuzzy
msgid "Hidden W95 FAT32 (LBA)"
msgstr "Skrytá Win95 FAT32 (LBA)"
#: fdisk/i386_sys_types.c:30
#, fuzzy
msgid "Hidden W95 FAT16 (LBA)"
msgstr "Skrytá Win95 FAT16 (LBA)"
#: fdisk/i386_sys_types.c:31
msgid "NEC DOS"
msgstr "NEC DOS"
#: fdisk/i386_sys_types.c:32
msgid "Plan 9"
msgstr "Plan 9"
#: fdisk/i386_sys_types.c:33
msgid "PartitionMagic recovery"
msgstr "PartitionMagic recovery"
#: fdisk/i386_sys_types.c:34
msgid "Venix 80286"
msgstr "Venix 80286"
#: fdisk/i386_sys_types.c:35
msgid "PPC PReP Boot"
msgstr "PPC PReP Boot"
#: fdisk/i386_sys_types.c:36
msgid "SFS"
msgstr "SFS"
#: fdisk/i386_sys_types.c:37
msgid "QNX4.x"
msgstr "QNX4.x"
#: fdisk/i386_sys_types.c:38
msgid "QNX4.x 2nd part"
msgstr "QNX4.x 2. èást"
#: fdisk/i386_sys_types.c:39
msgid "QNX4.x 3rd part"
msgstr "QNX4.x 3. èást"
#: fdisk/i386_sys_types.c:40
msgid "OnTrack DM"
msgstr "OnTrack DM"
#: fdisk/i386_sys_types.c:41
msgid "OnTrack DM6 Aux1"
msgstr "OnTrack DM6 Aux1"
#. (or Novell)
#: fdisk/i386_sys_types.c:42
msgid "CP/M"
msgstr "CP/M"
#. CP/M or Microport SysV/AT
#: fdisk/i386_sys_types.c:43
msgid "OnTrack DM6 Aux3"
msgstr "OnTrack DM6 Aux3"
#: fdisk/i386_sys_types.c:44
msgid "OnTrackDM6"
msgstr "OnTrackDM6"
#: fdisk/i386_sys_types.c:45
msgid "EZ-Drive"
msgstr "EZ-Drive"
#: fdisk/i386_sys_types.c:46
msgid "Golden Bow"
msgstr "Golden Bow"
#: fdisk/i386_sys_types.c:47
msgid "Priam Edisk"
msgstr "Priam Edisk"
#. DOS R/O or SpeedStor
#: fdisk/i386_sys_types.c:48 fdisk/i386_sys_types.c:90
#: fdisk/i386_sys_types.c:96 fdisk/i386_sys_types.c:97
msgid "SpeedStor"
msgstr "SpeedStor"
#: fdisk/i386_sys_types.c:49
msgid "GNU HURD or SysV"
msgstr "GNU HURD èi SysV"
#. GNU HURD or Mach or Sys V/386 (such as ISC UNIX)
#: fdisk/i386_sys_types.c:50
msgid "Novell Netware 286"
msgstr "Novell Netware 286"
#: fdisk/i386_sys_types.c:51
msgid "Novell Netware 386"
msgstr "Novell Netware 386"
#: fdisk/i386_sys_types.c:52
msgid "DiskSecure Multi-Boot"
msgstr "DiskSecure Multi-Boot"
#: fdisk/i386_sys_types.c:53
msgid "PC/IX"
msgstr "PC/IX"
#: fdisk/i386_sys_types.c:54
msgid "Old Minix"
msgstr "Starý Minix"
#. Minix 1.4a and earlier
#: fdisk/i386_sys_types.c:55
msgid "Minix / old Linux"
msgstr "Minix / starý Linux"
#. Minix 1.4b and later
#: fdisk/i386_sys_types.c:56
#, fuzzy
msgid "Linux swap / Solaris"
msgstr "Linux swap"
#: fdisk/i386_sys_types.c:58
msgid "OS/2 hidden C: drive"
msgstr "OS/2 skrytý C: disk"
#: fdisk/i386_sys_types.c:59
msgid "Linux extended"
msgstr "Linux extended"
#: fdisk/i386_sys_types.c:60 fdisk/i386_sys_types.c:61
msgid "NTFS volume set"
msgstr "NTFS svazek"
#: fdisk/i386_sys_types.c:63
msgid "Amoeba"
msgstr "Amoeba"
#: fdisk/i386_sys_types.c:64
msgid "Amoeba BBT"
msgstr "Amoeba BBT"
#. (bad block table)
#: fdisk/i386_sys_types.c:65
msgid "BSD/OS"
msgstr "BSD/OS"
#. BSDI
#: fdisk/i386_sys_types.c:66
msgid "IBM Thinkpad hibernation"
msgstr "IBM Thinkpad hibernation"
#: fdisk/i386_sys_types.c:67
msgid "FreeBSD"
msgstr ""
#. various BSD flavours
#: fdisk/i386_sys_types.c:68
msgid "OpenBSD"
msgstr "OpenBSD"
#: fdisk/i386_sys_types.c:69
msgid "NeXTSTEP"
msgstr "NeXTSTEP"
#: fdisk/i386_sys_types.c:70
msgid "Darwin UFS"
msgstr ""
#: fdisk/i386_sys_types.c:71
#, fuzzy
msgid "NetBSD"
msgstr "OpenBSD"
#: fdisk/i386_sys_types.c:72
msgid "Darwin boot"
msgstr ""
#: fdisk/i386_sys_types.c:73
msgid "BSDI fs"
msgstr "BSDI ss"
#: fdisk/i386_sys_types.c:74
msgid "BSDI swap"
msgstr "BSDI swap"
#: fdisk/i386_sys_types.c:75
msgid "Boot Wizard hidden"
msgstr "skrytý Boot Wizard"
#: fdisk/i386_sys_types.c:76
msgid "Solaris boot"
msgstr ""
#: fdisk/i386_sys_types.c:77
msgid "Solaris"
msgstr ""
#: fdisk/i386_sys_types.c:78
msgid "DRDOS/sec (FAT-12)"
msgstr "DRDOS/sec (FAT-12)"
#: fdisk/i386_sys_types.c:79
msgid "DRDOS/sec (FAT-16 < 32M)"
msgstr "DRDOS/sec (FAT-16 < 32M)"
#: fdisk/i386_sys_types.c:80
msgid "DRDOS/sec (FAT-16)"
msgstr "DRDOS/sec (FAT-16)"
#: fdisk/i386_sys_types.c:81
msgid "Syrinx"
msgstr "Syrinx"
#: fdisk/i386_sys_types.c:82
msgid "Non-FS data"
msgstr "data mimo SS"
#: fdisk/i386_sys_types.c:83
msgid "CP/M / CTOS / ..."
msgstr "CP/M / CTOS / ..."
#. CP/M or Concurrent CP/M or
#. Concurrent DOS or CTOS
#: fdisk/i386_sys_types.c:85
msgid "Dell Utility"
msgstr "Dell utilita"
#. Dell PowerEdge Server utilities
#: fdisk/i386_sys_types.c:86
msgid "BootIt"
msgstr "BootIt"
#. BootIt EMBRM
#: fdisk/i386_sys_types.c:87
msgid "DOS access"
msgstr "DOS access"
#. DOS access or SpeedStor 12-bit FAT
#. extended partition
#: fdisk/i386_sys_types.c:89
msgid "DOS R/O"
msgstr "DOS R/O"
#. SpeedStor 16-bit FAT extended
#. partition < 1024 cyl.
#: fdisk/i386_sys_types.c:92
msgid "BeOS fs"
msgstr "BeOS ss"
#: fdisk/i386_sys_types.c:93
msgid "EFI GPT"
msgstr "EFI GPT"
#. Intel EFI GUID Partition Table
#: fdisk/i386_sys_types.c:94
msgid "EFI (FAT-12/16/32)"
msgstr "EFI (FAT-12/16/32)"
#. Intel EFI System Partition
#: fdisk/i386_sys_types.c:95
msgid "Linux/PA-RISC boot"
msgstr ""
#. SpeedStor large partition
#: fdisk/i386_sys_types.c:98
msgid "DOS secondary"
msgstr "DOS sekundární"
#. New (2.2.x) raid partition with
#. autodetect using persistent
#. superblock
#: fdisk/i386_sys_types.c:102
msgid "LANstep"
msgstr "LANstep"
#. SpeedStor >1024 cyl. or LANstep
#: fdisk/i386_sys_types.c:103
msgid "BBT"
msgstr "BBT"
#: fdisk/sfdisk.c:197
#, c-format
msgid "seek error on %s - cannot seek to %lu\n"
msgstr "chyba posunu ukazovátka na %s - ukazovátko nelze posunout na %lu\n"
#: fdisk/sfdisk.c:202
#, c-format
msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x\n"
msgstr ""
"chyba pøi posunu ukazovátka: po¾adavek 0x%08x%08x, výsledek 0x%08x%08x\n"
#: fdisk/sfdisk.c:248
msgid "out of memory - giving up\n"
msgstr "nedostatek pamìti - konèím\n"
#: fdisk/sfdisk.c:253 fdisk/sfdisk.c:336
#, c-format
msgid "read error on %s - cannot read sector %lu\n"
msgstr "chyba ètení na %s - sektor %lu nelze èíst\n"
#: fdisk/sfdisk.c:271
#, c-format
msgid "ERROR: sector %lu does not have an msdos signature\n"
msgstr "CHYBA: sektor %lu nemá msdos podpis\n"
#: fdisk/sfdisk.c:286
#, c-format
msgid "write error on %s - cannot write sector %lu\n"
msgstr "chyba zápisu na %s - sektor %lu nelze zapsat\n"
#: fdisk/sfdisk.c:324
#, c-format
msgid "cannot open partition sector save file (%s)\n"
msgstr "soubor pro ulo¾ení sektorù (%s) nelze otevøít\n"
#: fdisk/sfdisk.c:342
#, c-format
msgid "write error on %s\n"
msgstr "chyba zápisu na %s\n"
#: fdisk/sfdisk.c:360
#, c-format
msgid "cannot stat partition restore file (%s)\n"
msgstr "volání stat pro soubor s ulo¾enými sektory (%s) selhalo\n"
#: fdisk/sfdisk.c:365
msgid "partition restore file has wrong size - not restoring\n"
msgstr "soubor s ulo¾enými sektory má chybnou velikost - nebude obnoven\n"
#: fdisk/sfdisk.c:369
msgid "out of memory?\n"
msgstr "nedostatek pamìti?\n"
#: fdisk/sfdisk.c:375
#, c-format
msgid "cannot open partition restore file (%s)\n"
msgstr "soubor s ulo¾enými sektory (%s) nelze otevøít\n"
#: fdisk/sfdisk.c:381
#, c-format
msgid "error reading %s\n"
msgstr "chyba pøi ètení %s\n"
#: fdisk/sfdisk.c:388
#, c-format
msgid "cannot open device %s for writing\n"
msgstr "zaøízení %s nelze otevøít pro zápis\n"
#: fdisk/sfdisk.c:400
#, c-format
msgid "error writing sector %lu on %s\n"
msgstr "chyba pøi zápisu sektoru %lu na %s\n"
#: fdisk/sfdisk.c:453
#, c-format
msgid "Disk %s: cannot get geometry\n"
msgstr "Disk %s: geometrii nelze zjistit\n"
#: fdisk/sfdisk.c:470
#, c-format
msgid "Disk %s: cannot get size\n"
msgstr "Disk %s: velikost nelze zjistit\n"
#: fdisk/sfdisk.c:503
#, c-format
msgid ""
"Warning: start=%lu - this looks like a partition rather than\n"
"the entire disk. Using fdisk on it is probably meaningless.\n"
"[Use the --force option if you really want this]\n"
msgstr ""
"Varování: zaèátek=%lu - to vypadá spí¹e jako diskový oddíl ne¾li\n"
"celý disk. Pou¾ití fdisku je v tom pøípadì pravdìpodobnì zbyteèné\n"
"[Pou¾ijte pøepínaè --force pokud to opravdu chcete.]\n"
#: fdisk/sfdisk.c:510
#, c-format
msgid "Warning: HDIO_GETGEO says that there are %lu heads\n"
msgstr "Varování: dle HDIO_GETGEO je poèet hlav %lu\n"
#: fdisk/sfdisk.c:513
#, c-format
msgid "Warning: HDIO_GETGEO says that there are %lu sectors\n"
msgstr "Varování: dle HDIO_GETGEO je poèet sektorù %lu\n"
#: fdisk/sfdisk.c:517
#, c-format
msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders\n"
msgstr "Varování: dle BLKGETSIZE/HDIO_GETGEO je poèet cylindrù %lu\n"
#: fdisk/sfdisk.c:521
#, c-format
msgid ""
"Warning: unlikely number of sectors (%lu) - usually at most 63\n"
"This will give problems with all software that uses C/H/S addressing.\n"
msgstr ""
"Varování: podivný poèet sektorù (%lu) - obvykle nebývá více ne¾ 63\n"
"To zpùsobí problémy v¹em programùm, které pou¾ívají CHS adresování.\n"
#: fdisk/sfdisk.c:525
#, c-format
msgid ""
"\n"
"Disk %s: %lu cylinders, %lu heads, %lu sectors/track\n"
msgstr ""
"\n"
"Disk %s: cylindrù: %lu, hlav: %lu, sektorù/stopu: %lu\n"
#: fdisk/sfdisk.c:607
#, c-format
msgid ""
"%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n"
msgstr "%s diskového oddílu %s má chybný poèet hlav: %lu (mìlo by být 0-%lu)\n"
#: fdisk/sfdisk.c:612
#, c-format
msgid ""
"%s of partition %s has impossible value for sector: %lu (should be in 1-%"
"lu)\n"
msgstr ""
"%s diskového oddílu %s má chybný poèet sektorù: %lu (mìlo by být 1-%lu)\n"
#: fdisk/sfdisk.c:617
#, c-format
msgid ""
"%s of partition %s has impossible value for cylinders: %lu (should be in 0-%"
"lu)\n"
msgstr ""
"%s diskového oddílu %s má chybný poèet cylindrù: %lu (mìlo by být 0-%lu)\n"
#: fdisk/sfdisk.c:657
msgid ""
"Id Name\n"
"\n"
msgstr "Id Název\n"
#: fdisk/sfdisk.c:813
msgid "Re-reading the partition table ...\n"
msgstr "Naèítám znovu tabulku rozdìlení disku ...\n"
#: fdisk/sfdisk.c:819
msgid ""
"The command to re-read the partition table failed\n"
"Reboot your system now, before using mkfs\n"
msgstr ""
"Nepodaøilo se znovu naèíst tabulku rozdìlení disku.\n"
"Restartujte nyní, pøed pou¾itím mkfs, systém.\n"
#: fdisk/sfdisk.c:824
#, c-format
msgid "Error closing %s\n"
msgstr "Chyba pøi zavírání %s\n"
#: fdisk/sfdisk.c:862
#, c-format
msgid "%s: no such partition\n"
msgstr "diskový oddíl %s neexistuje\n"
#: fdisk/sfdisk.c:885
msgid "unrecognized format - using sectors\n"
msgstr "Neznámý formát - pou¾ívám sektory\n"
#: fdisk/sfdisk.c:924
#, c-format
msgid "# partition table of %s\n"
msgstr "# tabulka rozdìlení disku pro %s\n"
#: fdisk/sfdisk.c:935
#, c-format
msgid "unimplemented format - using %s\n"
msgstr "nepou¾ívaný formát - pou¾ívám %s\n"
#: fdisk/sfdisk.c:939
#, c-format
msgid ""
"Units = cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""
"Jednotky = cylindry po %lu bajtech, bloky po 1024 bajtech, poèítáno od %d\n"
"\n"
#: fdisk/sfdisk.c:942
#, fuzzy
msgid " Device Boot Start End #cyls #blocks Id System\n"
msgstr " Zaøíz Boot Zaèátek Konec #cylind #bloky Id Systém\n"
#: fdisk/sfdisk.c:947
#, c-format
msgid ""
"Units = sectors of 512 bytes, counting from %d\n"
"\n"
msgstr ""
"Jednotky = sektory po 512 bajtech, poèítáno od %d\n"
"\n"
#: fdisk/sfdisk.c:949
#, fuzzy
msgid " Device Boot Start End #sectors Id System\n"
msgstr " Zaøíz Boot Zaèátek Konec #sektory Id Systém\n"
#: fdisk/sfdisk.c:952
#, c-format
msgid ""
"Units = blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""
"Jednotky = bloky po 1024 bajtech, poèítáno od %d\n"
"\n"
#: fdisk/sfdisk.c:954
#, fuzzy
msgid " Device Boot Start End #blocks Id System\n"
msgstr " Zaøíz Boot Zaèátek Konec #bloky Id Systém\n"
#: fdisk/sfdisk.c:957
#, fuzzy, c-format
msgid ""
"Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""
"Jednotky = megabajty po 1048576 bajtech, bloky po 1024 bajtech, poèítáno od %"
"d\n"
"\n"
#: fdisk/sfdisk.c:959
#, fuzzy
msgid " Device Boot Start End MiB #blocks Id System\n"
msgstr " Zaøíz Boot Zaèátek Konec MB #bloky Id Systém\n"
#: fdisk/sfdisk.c:1119
#, c-format
msgid "\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr "\t\tzaèátek: (c,h,s) pøedpoklad (%ld,%ld,%ld) nalezeno (%ld,%ld,%ld)\n"
#: fdisk/sfdisk.c:1126
#, c-format
msgid "\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr "\t\tkonec: (c,h,s) pøedpoklad (%ld,%ld,%ld) nalezeno (%ld,%ld,%ld)\n"
#: fdisk/sfdisk.c:1129
#, c-format
msgid "partition ends on cylinder %ld, beyond the end of the disk\n"
msgstr "diskový oddíl konèí na cylindru %ld, t.j. za koncem disku\n"
#: fdisk/sfdisk.c:1139
msgid "No partitions found\n"
msgstr "Nebyly nalezeny ¾ádné diskové oddíly\n"
#: fdisk/sfdisk.c:1143
#, fuzzy, c-format
msgid ""
"Warning: The partition table looks like it was made\n"
" for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n"
"For this listing I'll assume that geometry.\n"
msgstr ""
"Varování: Zdá se, ¾e první diskový oddíl byl vytvoøen\n"
"pro C/H/S=*/%ld/%ld (místo %ld/%ld/%ld).\n"
"Zobrazuji za pou¾ití této geometrie.\n"
#: fdisk/sfdisk.c:1192
msgid "no partition table present.\n"
msgstr "Nebyla nalezena ¾ádná tabulka rozdìlení disku.\n"
#: fdisk/sfdisk.c:1194
#, c-format
msgid "strange, only %d partitions defined.\n"
msgstr "Zvlá¹tní - poèet definovaných diskových oddílù je pouze %d.\n"
#: fdisk/sfdisk.c:1203
#, c-format
msgid "Warning: partition %s has size 0 but is not marked Empty\n"
msgstr ""
"Varování: diskový oddíl %s má velikost 0 a není oznaèen jako prázdný.\n"
#: fdisk/sfdisk.c:1206
#, c-format
msgid "Warning: partition %s has size 0 and is bootable\n"
msgstr "Varování: diskový oddíl %s má velikost 0 a je startovací.\n"
#: fdisk/sfdisk.c:1209
#, c-format
msgid "Warning: partition %s has size 0 and nonzero start\n"
msgstr "Varování: diskový oddíl %s má velikost 0 a nenulový zaèátek.\n"
#: fdisk/sfdisk.c:1220
#, c-format
msgid "Warning: partition %s "
msgstr "Varování: diskový oddíl %s "
#: fdisk/sfdisk.c:1221
#, c-format
msgid "is not contained in partition %s\n"
msgstr "není obsa¾en v diskovém oddílu %s.\n"
#: fdisk/sfdisk.c:1232
#, c-format
msgid "Warning: partitions %s "
msgstr "Varování: diskové oddíly %s "
#: fdisk/sfdisk.c:1233
#, c-format
msgid "and %s overlap\n"
msgstr "a %s se navzájem pøekrývají.\n"
#: fdisk/sfdisk.c:1244
#, c-format
msgid ""
"Warning: partition %s contains part of the partition table (sector %lu),\n"
"and will destroy it when filled\n"
msgstr ""
"Varování: diskový oddíl %s obsahuje èást tabulky rozdìlení disku (sektor %"
"lu)\n"
"a v pøípadì zaplnìní ji znièí\n"
#: fdisk/sfdisk.c:1256
#, c-format
msgid "Warning: partition %s starts at sector 0\n"
msgstr "Varování: diskový oddíl %s zaèíná na sektoru 0\n"
#: fdisk/sfdisk.c:1260
#, c-format
msgid "Warning: partition %s extends past end of disk\n"
msgstr "Varování: diskový oddíl %s pøesahuje za konec disku.\n"
#: fdisk/sfdisk.c:1275
msgid ""
"Among the primary partitions, at most one can be extended\n"
" (although this is not a problem under Linux)\n"
msgstr ""
"Pouze jeden z primárních diskových oddílù mù¾e být roz¹íøeným.\n"
" (aèkoliv v Linux to není problém)\n"
#: fdisk/sfdisk.c:1293
#, c-format
msgid "Warning: partition %s does not start at a cylinder boundary\n"
msgstr "Varování: diskový oddíl %s nezaèíná na hranici cylindru.\n"
#: fdisk/sfdisk.c:1299
#, c-format
msgid "Warning: partition %s does not end at a cylinder boundary\n"
msgstr "Varování: diskový oddíl %s nekonèí na hranici cylindru.\n"
#: fdisk/sfdisk.c:1317
msgid ""
"Warning: more than one primary partition is marked bootable (active)\n"
"This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
msgstr ""
"Varování: více ne¾ jeden primární diskový oddíl je oznaèen jako startovací.\n"
"LILU to neèiní problémy, ale DOS MBR z tohoto disku nenastartuje.\n"
#: fdisk/sfdisk.c:1324
msgid ""
"Warning: usually one can boot from primary partitions only\n"
"LILO disregards the `bootable' flag.\n"
msgstr ""
"Varování: obyèejnì je mo¾né startovat pouze z primárních diskových oddíl|ù.\n"
"LILO nebude brát ohled na pøíznak 'startovací'.\n"
#: fdisk/sfdisk.c:1330
msgid ""
"Warning: no primary partition is marked bootable (active)\n"
"This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
msgstr ""
"Varování: ¾ádný primární diskový oddíl není oznaèen jako startovací.\n"
"LILU to neèiní problémy, ale DOS z tohoto disku nenastartuje.\n"
#: fdisk/sfdisk.c:1344
#, fuzzy
msgid "start"
msgstr "stav"
#: fdisk/sfdisk.c:1347
#, c-format
msgid ""
"partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr ""
"diskový oddíl %s: zaèátek: (c,h,s) pøedpoklad (%ld,%ld,%ld), nalezeno\n"
"(%ld,%ld,%ld)\n"
#: fdisk/sfdisk.c:1353
#, fuzzy
msgid "end"
msgstr "odeslání"
#: fdisk/sfdisk.c:1356
#, c-format
msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr ""
"diskový oddíl %s: konec: (c,h,s) pøedpoklad (%ld,%ld,%ld), nalezeno\n"
"(%ld,%ld,%ld)\n"
#: fdisk/sfdisk.c:1359
#, c-format
msgid "partition %s ends on cylinder %ld, beyond the end of the disk\n"
msgstr "diskový oddíl %s konèí na cylindru %ld, t.j. za koncem disku\n"
#: fdisk/sfdisk.c:1384
#, c-format
msgid ""
"Warning: shifted start of the extd partition from %ld to %ld\n"
"(For listing purposes only. Do not change its contents.)\n"
msgstr ""
"Varování: zaèátek roz¹íøeného diskového oddílu posunut z %ld na %ld.\n"
"(Pouze pro úèely výpisu. Nemìòte jeho obsah.)\n"
#: fdisk/sfdisk.c:1390
msgid ""
"Warning: extended partition does not start at a cylinder boundary.\n"
"DOS and Linux will interpret the contents differently.\n"
msgstr ""
"Varování: roz¹íøený diskový oddíl nezaèíná na hranici cylindru.\n"
"DOS a Linux budou jeho obsah interpretovat rozdílnì.\n"
#: fdisk/sfdisk.c:1408 fdisk/sfdisk.c:1485
#, c-format
msgid "too many partitions - ignoring those past nr (%d)\n"
msgstr "pøíli¹ mnoho diskových oddílù - ignoruji > %d\n"
#: fdisk/sfdisk.c:1423
msgid "tree of partitions?\n"
msgstr "strom diskových oddílù?\n"
#: fdisk/sfdisk.c:1544
msgid "detected Disk Manager - unable to handle that\n"
msgstr "nalezen Disk Manager - s tím neumím pracovat\n"
#: fdisk/sfdisk.c:1551
msgid "DM6 signature found - giving up\n"
msgstr "nalezen DM6 podpis - konèím\n"
#: fdisk/sfdisk.c:1571
msgid "strange..., an extended partition of size 0?\n"
msgstr "zvlá¹tní..., roz¹íøený diskový oddíl o velikosti 0?\n"
#: fdisk/sfdisk.c:1578 fdisk/sfdisk.c:1589
msgid "strange..., a BSD partition of size 0?\n"
msgstr "zvlá¹tní..., BSD diskový oddíl o velikosti 0?\n"
#: fdisk/sfdisk.c:1623
#, fuzzy, c-format
msgid " %s: unrecognized partition table type\n"
msgstr " diskový oddíl %s není znám\n"
#: fdisk/sfdisk.c:1635
msgid "-n flag was given: Nothing changed\n"
msgstr "byl zadán pøepínaè -n: Nic nebylo zmìnìno\n"
#: fdisk/sfdisk.c:1651
msgid "Failed saving the old sectors - aborting\n"
msgstr "Chyba pøi ukládání starých sektorù - konèím\n"
#: fdisk/sfdisk.c:1656
#, c-format
msgid "Failed writing the partition on %s\n"
msgstr "Chyba pøi zápisu na diskový oddíl %s\n"
#: fdisk/sfdisk.c:1733
msgid "long or incomplete input line - quitting\n"
msgstr "pøíli¹ dlouhý èi neúplný øádek - konèím\n"
#: fdisk/sfdisk.c:1769
#, c-format
msgid "input error: `=' expected after %s field\n"
msgstr "vstupní chyba: po polo¾ce %s jsem oèekával znak `='\n"
#: fdisk/sfdisk.c:1776
#, c-format
msgid "input error: unexpected character %c after %s field\n"
msgstr "vstupní chyba: neoèekávaný znak %c po polo¾ce %s\n"
#: fdisk/sfdisk.c:1782
#, c-format
msgid "unrecognized input: %s\n"
msgstr "nerozpoznaný vstup: %s\n"
#: fdisk/sfdisk.c:1824
msgid "number too big\n"
msgstr "èíslo je pøíli¹ veliké\n"
#: fdisk/sfdisk.c:1828
msgid "trailing junk after number\n"
msgstr "nesmysly za èíslem\n"
#: fdisk/sfdisk.c:1951
msgid "no room for partition descriptor\n"
msgstr "není místo pro popis diskového oddílu\n"
#: fdisk/sfdisk.c:1984
msgid "cannot build surrounding extended partition\n"
msgstr "okolní roz¹iøující diskový oddíl nelze vytvoøit\n"
#: fdisk/sfdisk.c:2035
msgid "too many input fields\n"
msgstr "pøíli¹ mnoho vstupních polo¾ek\n"
#. no free blocks left - don't read any further
#: fdisk/sfdisk.c:2069
msgid "No room for more\n"
msgstr "Ji¾ nejsou volné bloky\n"
#: fdisk/sfdisk.c:2088
msgid "Illegal type\n"
msgstr "Chybný typ\n"
#: fdisk/sfdisk.c:2120
#, c-format
msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n"
msgstr ""
"Varování: zadaná velikost(%ld) pøekraèuje maximální povolenou velikost (%"
"lu)\n"
#: fdisk/sfdisk.c:2126
msgid "Warning: empty partition\n"
msgstr "Varování: prázdný diskový oddíl\n"
#: fdisk/sfdisk.c:2140
#, c-format
msgid "Warning: bad partition start (earliest %lu)\n"
msgstr "Varování: chybný zaèátek diskového oddílu (døívìj¹í %lu)\n"
#: fdisk/sfdisk.c:2153
msgid "unrecognized bootable flag - choose - or *\n"
msgstr "nerozpoznaný pøíznak 'startovací' - zvolte - èi *\n"
#: fdisk/sfdisk.c:2170 fdisk/sfdisk.c:2183
msgid "partial c,h,s specification?\n"
msgstr "neúplná c,h,s specifikace?\n"
#: fdisk/sfdisk.c:2194
msgid "Extended partition not where expected\n"
msgstr "Roz¹íøený diskový oddíl na neoèekávaném místì\n"
#: fdisk/sfdisk.c:2226
msgid "bad input\n"
msgstr "chybný vstup\n"
#: fdisk/sfdisk.c:2248
msgid "too many partitions\n"
msgstr "pøíli¹ mnoho diskových oddílù\n"
#: fdisk/sfdisk.c:2281
msgid ""
"Input in the following format; absent fields get a default value.\n"
"<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
"Usually you only need to specify <start> and <size> (and perhaps <type>).\n"
msgstr ""
"Vstup v následujícím formátu; chybìjící polo¾ky budou nahrazeny "
"implicitními\n"
"hodnotami.\n"
"<zaèátek> <velikost> <typ [E,S,L,X,hex]> <startovací [-,*]> <c,h,s> <c,h,s>\n"
"Obvykle je tøeba zadat pouze <zaèátek> a <velikost> (a mo¾ná <typ>).\n"
#: fdisk/sfdisk.c:2301
msgid "version"
msgstr "verze"
#: fdisk/sfdisk.c:2307
#, c-format
msgid "Usage: %s [options] device ...\n"
msgstr "Pou¾ití: %s [pøepínaèe] zaøízení ...\n"
#: fdisk/sfdisk.c:2308
msgid "device: something like /dev/hda or /dev/sda"
msgstr "zaøízení: nìco jako /dev/hda èi /dev/sda"
#: fdisk/sfdisk.c:2309
msgid "useful options:"
msgstr "u¾iteèné pøepínaèe:"
#: fdisk/sfdisk.c:2310
msgid " -s [or --show-size]: list size of a partition"
msgstr " -s [èi --show-size]: vypí¹e velikost diskového oddílu"
#: fdisk/sfdisk.c:2311
msgid " -c [or --id]: print or change partition Id"
msgstr " -c [èi --id]: vypí¹e èi zmìní Id diskového oddílu"
#: fdisk/sfdisk.c:2312
msgid " -l [or --list]: list partitions of each device"
msgstr " -l [èi --list]: ke ka¾dému zaøízení vypí¹e diskové oddíly"
#: fdisk/sfdisk.c:2313
msgid " -d [or --dump]: idem, but in a format suitable for later input"
msgstr ""
" -d [èi --dump]: idem, ale ve formátu vhodném k dal¹ímu zpracování"
#: fdisk/sfdisk.c:2314
msgid " -i [or --increment]: number cylinders etc. from 1 instead of from 0"
msgstr " -i [èi --increment]: èísluje cylindry etc. od 1 místo od 0"
#: fdisk/sfdisk.c:2315
msgid ""
" -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/"
"MB"
msgstr ""
" -uS, -uB, -uC, -uM: jako jednotky pou¾ije Sektory/Bloky/Cylindry èi MB"
#: fdisk/sfdisk.c:2316
msgid " -T [or --list-types]:list the known partition types"
msgstr " -T [èi --list-types]:vypí¹e známé typy diskových oddílù"
#: fdisk/sfdisk.c:2317
msgid " -D [or --DOS]: for DOS-compatibility: waste a little space"
msgstr " -D [èi --DOS]: pro kompatibilitu s DOSEM: ubírá trochu místa"
#: fdisk/sfdisk.c:2318
msgid " -R [or --re-read]: make kernel reread partition table"
msgstr ""
" -R [èi --re-read]: donutí jádro znovu naèíst tabulku rozdìlení disku"
#: fdisk/sfdisk.c:2319
msgid " -N# : change only the partition with number #"
msgstr " -N# : zmìní pouze diskový oddíl s èíslem #"
#: fdisk/sfdisk.c:2320
msgid " -n : do not actually write to disk"
msgstr " -n : ¾ádné zmìny nebudou ulo¾eny na disk"
#: fdisk/sfdisk.c:2321
msgid ""
" -O file : save the sectors that will be overwritten to file"
msgstr " -O SOUBOR : ulo¾í zmìnìné sektory do SOUBORU"
#: fdisk/sfdisk.c:2322
msgid " -I file : restore these sectors again"
msgstr " -I SOUBOR : obnoví tyto sektory ze SOUBORU"
#: fdisk/sfdisk.c:2323
msgid " -v [or --version]: print version"
msgstr " -v [èi --version]: vypí¹e informace o verzi"
#: fdisk/sfdisk.c:2324
msgid " -? [or --help]: print this message"
msgstr " -? [èi --help]: vypí¹e tuto nápovìdu"
#: fdisk/sfdisk.c:2325
msgid "dangerous options:"
msgstr "nebezpeèné pøepínaèe:"
#: fdisk/sfdisk.c:2326
msgid " -g [or --show-geometry]: print the kernel's idea of the geometry"
msgstr ""
" -g [èi --show-geometry]: vypí¹e informace o geometrii, které\n"
" udr¾uje jádro"
#: fdisk/sfdisk.c:2327
msgid ""
" -x [or --show-extended]: also list extended partitions on output\n"
" or expect descriptors for them on input"
msgstr ""
" -x [èi --show-extended]: vypí¹e informace o roz¹íøených diskových\n"
" oddílech a na vstupu bude oèekávat jejich popis"
#: fdisk/sfdisk.c:2329
msgid ""
" -L [or --Linux]: do not complain about things irrelevant for Linux"
msgstr ""
" -L [èi --Linux]: problémy nepodstatné pro Linux budou ignorovány"
#: fdisk/sfdisk.c:2330
msgid " -q [or --quiet]: suppress warning messages"
msgstr " -q [èi --quiet]: nebude vypisovat varovné hlá¹ky"
#: fdisk/sfdisk.c:2331
msgid " You can override the detected geometry using:"
msgstr " Nalezenou geometrii mù¾ete pøepsat pomocí:"
#: fdisk/sfdisk.c:2332
msgid " -C# [or --cylinders #]:set the number of cylinders to use"
msgstr " -C# [èi --cylinders #]:nastaví poèet cylindrù"
#: fdisk/sfdisk.c:2333
msgid " -H# [or --heads #]: set the number of heads to use"
msgstr " -H# [èi --heads #]: nastaví poèet hlav"
#: fdisk/sfdisk.c:2334
msgid " -S# [or --sectors #]: set the number of sectors to use"
msgstr " -S# [èi --sectors #]: nastaví poèet cylindrù"
#: fdisk/sfdisk.c:2335
msgid "You can disable all consistency checking with:"
msgstr "Ovìøování konzistence mù¾ete vypnout pomocí:"
#: fdisk/sfdisk.c:2336
msgid " -f [or --force]: do what I say, even if it is stupid"
msgstr " -f [èi --force]: akceptuje ve¹keré - i nesmyslné - po¾adavky"
#: fdisk/sfdisk.c:2342
msgid "Usage:"
msgstr "Pou¾ití:"
#: fdisk/sfdisk.c:2343
#, c-format
msgid "%s device\t\t list active partitions on device\n"
msgstr "%s zaøízení\t\t vypí¹e aktivní diskové oddíly na daném zaøízení\n"
#: fdisk/sfdisk.c:2344
#, c-format
msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n"
msgstr ""
"%s zaøízení n1 n2 ... aktivuje diskové oddíly n1 ..., deaktivuje ostatní\n"
#: fdisk/sfdisk.c:2345
#, c-format
msgid "%s -An device\t activate partition n, inactivate the other ones\n"
msgstr "%s -An zaøízení\t aktivuje diskové oddíly n ..., deaktivuje ostatní\n"
#: fdisk/sfdisk.c:2509
msgid "no command?\n"
msgstr "¾ádný pøíkaz?\n"
#: fdisk/sfdisk.c:2627
#, fuzzy, c-format
msgid "total: %llu blocks\n"
msgstr "celkový poèet blokù: %d\n"
#: fdisk/sfdisk.c:2664
msgid "usage: sfdisk --print-id device partition-number\n"
msgstr "Pou¾ití: sfdisk --print-id zaøízení èíslo diskového oddílu\n"
#: fdisk/sfdisk.c:2666
msgid "usage: sfdisk --change-id device partition-number Id\n"
msgstr "Pou¾ití: sfdisk --change-id zaøízení Id diskového oddílu\n"
#: fdisk/sfdisk.c:2668
msgid "usage: sfdisk --id device partition-number [Id]\n"
msgstr "Pou¾ití: sfdisk --id zaøízení èíslo diskového oddílu [Id]\n"
#: fdisk/sfdisk.c:2675
msgid "can specify only one device (except with -l or -s)\n"
msgstr "mù¾ete zadat pouze jedno zaøízení (vyjímkou jsou pøepínaèe -l a -s)\n"
#: fdisk/sfdisk.c:2701
#, fuzzy, c-format
msgid "cannot open %s read-write\n"
msgstr "%s nelze otevøít.\n"
#: fdisk/sfdisk.c:2703
#, fuzzy, c-format
msgid "cannot open %s for reading\n"
msgstr "%s pro ètení nelze otevøít"
#: fdisk/sfdisk.c:2728
#, c-format
msgid "%s: OK\n"
msgstr "%s: OK\n"
#: fdisk/sfdisk.c:2745
#, c-format
msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
msgstr "%s: %ld cylindrù, %ld hlav, %ld sektorù/stopu\n"
#: fdisk/sfdisk.c:2762
#, fuzzy, c-format
msgid "Cannot get size of %s\n"
msgstr "nelze zjistit velikost %s"
#: fdisk/sfdisk.c:2840
#, c-format
msgid "bad active byte: 0x%x instead of 0x80\n"
msgstr "chybný aktivní bajt: 0x%x místo 0x80\n"
#: fdisk/sfdisk.c:2858 fdisk/sfdisk.c:2911 fdisk/sfdisk.c:2942
msgid ""
"Done\n"
"\n"
msgstr ""
"Hotovo\n"
"\n"
#: fdisk/sfdisk.c:2867
#, c-format
msgid ""
"You have %d active primary partitions. This does not matter for LILO,\n"
"but the DOS MBR will only boot a disk with 1 active partition.\n"
msgstr ""
"Poèet aktivních diskových oddílù je %d. LILU to neèiní problémy, ale DOS "
"MBR\n"
"nastartuje pouze z disku s jedním aktivním diskovým oddílem.\n"
#: fdisk/sfdisk.c:2881
#, c-format
msgid "partition %s has id %x and is not hidden\n"
msgstr "diskový oddíl %s má id %x a není skrytý\n"
#: fdisk/sfdisk.c:2938
#, c-format
msgid "Bad Id %lx\n"
msgstr "Id %lx je chybné\n"
#: fdisk/sfdisk.c:2953
msgid "This disk is currently in use.\n"
msgstr "Tento disk je právì pou¾íván.\n"
#: fdisk/sfdisk.c:2970
#, c-format
msgid "Fatal error: cannot find %s\n"
msgstr "Fatální chyba: %s nelze nalézt\n"
#: fdisk/sfdisk.c:2973
#, c-format
msgid "Warning: %s is not a block device\n"
msgstr "Varování: %s není blokovým zaøízením\n"
#: fdisk/sfdisk.c:2979
msgid "Checking that no-one is using this disk right now ...\n"
msgstr "Ovìøuji, zda tento disk není právì pou¾íván ...\n"
#: fdisk/sfdisk.c:2981
msgid ""
"\n"
"This disk is currently in use - repartitioning is probably a bad idea.\n"
"Umount all file systems, and swapoff all swap partitions on this disk.\n"
"Use the --no-reread flag to suppress this check.\n"
msgstr ""
"\n"
"Tento disk je právì pou¾íván - vytváøení diskových oddílù není dobrým\n"
"nápadem. Odpojte v¹echny systémy souborù a pomocí swapoff deaktivujte\n"
"v¹echny odkládací prostory na tomto disku. K potlaèení této kontroly mù¾ete\n"
"pou¾ít pøepínaè --no-reread.\n"
#: fdisk/sfdisk.c:2985
msgid "Use the --force flag to overrule all checks.\n"
msgstr "Pou¾ijte pøepínaè --force k potlaèení ve¹kerých kontrol.\n"
#: fdisk/sfdisk.c:2989
msgid "OK\n"
msgstr "OK\n"
#: fdisk/sfdisk.c:2998
msgid "Old situation:\n"
msgstr "Stará situace:\n"
#: fdisk/sfdisk.c:3002
#, c-format
msgid "Partition %d does not exist, cannot change it\n"
msgstr "Diskový oddíl %d neexistuje. Nelze jej zmìnit.\n"
#: fdisk/sfdisk.c:3010
msgid "New situation:\n"
msgstr "Nová situace:\n"
#: fdisk/sfdisk.c:3015
msgid ""
"I don't like these partitions - nothing changed.\n"
"(If you really want this, use the --force option.)\n"
msgstr ""
"Toto rozlo¾ení diskových oddílù se mi nelíbí - nic nemìním.\n"
"(Pokud jej opravdu chcete pou¾ít, pak zadejte pøepínaè --force.)\n"
#: fdisk/sfdisk.c:3018
msgid "I don't like this - probably you should answer No\n"
msgstr "Toto se mi nelíbí - mìl byste odpovìdìt NO\n"
#: fdisk/sfdisk.c:3023
msgid "Are you satisfied with this? [ynq] "
msgstr "Vyhovuje Vám to? [ynq] "
#: fdisk/sfdisk.c:3025
msgid "Do you want to write this to disk? [ynq] "
msgstr "Ulo¾it na disk? [ynq] "
#: fdisk/sfdisk.c:3030
msgid ""
"\n"
"sfdisk: premature end of input\n"
msgstr ""
"\n"
"sfdisk: pøedèasný konec vstupu\n"
#: fdisk/sfdisk.c:3032
msgid "Quitting - nothing changed\n"
msgstr "Konèím - nebyly uèinìny ¾ádné zmìny\n"
#: fdisk/sfdisk.c:3038
msgid "Please answer one of y,n,q\n"
msgstr "Odpovìzte prosím y,n èi q\n"
#: fdisk/sfdisk.c:3046
msgid ""
"Successfully wrote the new partition table\n"
"\n"
msgstr ""
"Nová tabulka rozdìlení disku byla úspì¹nì ulo¾ena.\n"
"\n"
#: fdisk/sfdisk.c:3052
msgid ""
"If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
"to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
"(See fdisk(8).)\n"
msgstr ""
"Pokud jste vytvoøil èi zmìnil nìjaké DOSOVÉ diskové oddíly - napø. /dev/"
"bla7,\n"
"pou¾ijte dd(1) k vynulování prvních 512 bajtù: 'dd if=/dev/zero of=/dev/"
"bla7\n"
"bs=512 count=1' (viz fdisk(8)).\n"
#: getopt/getopt.c:233
msgid "Try `getopt --help' for more information.\n"
msgstr "Více informací získáte pøíkazem `getopt --help'.\n"
#: getopt/getopt.c:299
msgid "empty long option after -l or --long argument"
msgstr "prázdná dlouhá volba po pøepínaèi -l èi --long"
#: getopt/getopt.c:319
msgid "unknown shell after -s or --shell argument"
msgstr "neznámý shell po pøepínaèi -s èi --shell"
#: getopt/getopt.c:324
msgid "Usage: getopt optstring parameters\n"
msgstr "Pou¾ití: getopt øetìzec-s-volbami pøepínaèe\n"
#: getopt/getopt.c:325
msgid " getopt [options] [--] optstring parameters\n"
msgstr " getopt [volby] [--] øetìzec-s-volbami pøepínaèe\n"
#: getopt/getopt.c:326
msgid " getopt [options] -o|--options optstring [options] [--]\n"
msgstr " getopt [volby] -o|--options øetìzec-s-volbami [volby] [--]\n"
#: getopt/getopt.c:327
msgid " parameters\n"
msgstr " argumenty\n"
#: getopt/getopt.c:328
msgid ""
" -a, --alternative Allow long options starting with single -\n"
msgstr ""
" -a, --alternative Akceptuje dlouhé volby zaèínající jedním -\n"
#: getopt/getopt.c:329
msgid " -h, --help This small usage guide\n"
msgstr " -h, --help Vypí¹e tuto nápovìdu\n"
#: getopt/getopt.c:330
msgid " -l, --longoptions=longopts Long options to be recognized\n"
msgstr " -l, --longoptions=dlouhvol Rozpoznávané dlouhé volby\n"
#: getopt/getopt.c:331
msgid ""
" -n, --name=progname The name under which errors are reported\n"
msgstr ""
" -n, --name=názevprog Název, pod kterým jsou oznamovány chyby\n"
#: getopt/getopt.c:332
msgid " -o, --options=optstring Short options to be recognized\n"
msgstr " -o, --options=krátvol Rozpoznávané krátké volby\n"
#: getopt/getopt.c:333
msgid " -q, --quiet Disable error reporting by getopt(3)\n"
msgstr ""
" -q, --quiet Vypne oznamování chyb pomocí getopt(3)\n"
#: getopt/getopt.c:334
msgid " -Q, --quiet-output No normal output\n"
msgstr " -Q, --quiet-output ®ádný normální výstup\n"
#: getopt/getopt.c:335
msgid " -s, --shell=shell Set shell quoting conventions\n"
msgstr " -s, --shell=shell Nastaví konvence uzavíraní\n"
#: getopt/getopt.c:336
msgid " -T, --test Test for getopt(1) version\n"
msgstr " -T, --test Testuje verzi getopt(1)\n"
#: getopt/getopt.c:337
msgid " -u, --unqote Do not quote the output\n"
msgstr " -u, --unqote neuzavøe výstuo do uvozovek\n"
#: getopt/getopt.c:338
msgid " -V, --version Output version information\n"
msgstr " -V, --version Vypí¹e informace o verzi\n"
#: getopt/getopt.c:395 getopt/getopt.c:456
msgid "missing optstring argument"
msgstr "chybí øetìzec-s-volbami"
#: getopt/getopt.c:444
#, fuzzy
msgid "getopt (enhanced) 1.1.3\n"
msgstr "getopt (roz¹íøené) 1.1.2\n"
#: getopt/getopt.c:450
msgid "internal error, contact the author."
msgstr "Vnitøní chyba, oznamte ji autorovi."
#: hwclock/cmos.c:176
msgid "booted from MILO\n"
msgstr "spu¹tìn pomocí MILO\n"
#: hwclock/cmos.c:185
msgid "Ruffian BCD clock\n"
msgstr "hodnoty ulo¾eny v BCD tvaru\n"
#: hwclock/cmos.c:201
#, c-format
msgid "clockport adjusted to 0x%x\n"
msgstr "vstupnì/výstupní port pro pøístup k hodinám nastaven na 0x%x\n"
#: hwclock/cmos.c:213
msgid "funky TOY!\n"
msgstr "pou¾it pøepínaè --funky-toy!\n"
#: hwclock/cmos.c:267
#, c-format
msgid "%s: atomic %s failed for 1000 iterations!"
msgstr "%s: 1000 neúspì¹ných pokusù o atomické provedení %s!"
#: hwclock/cmos.c:591
#, c-format
msgid "Cannot open /dev/port: %s"
msgstr "/dev/port nelze otevøít: %s"
#: hwclock/cmos.c:598
msgid "I failed to get permission because I didn't try.\n"
msgstr "Jeliko¾ jsem se nesna¾il, nepodaøilo se mi získat práva pro pøístup.\n"
#: hwclock/cmos.c:601
#, c-format
msgid "%s is unable to get I/O port access: the iopl(3) call failed.\n"
msgstr "%s: pøístup k portu nelze získat: volání iopl(3) selhalo.\n"
#: hwclock/cmos.c:604
msgid "Probably you need root privileges.\n"
msgstr "Pravdìpodobnì je tøeba mít práva superu¾ivatele.\n"
#: hwclock/hwclock.c:223
#, c-format
msgid "Assuming hardware clock is kept in %s time.\n"
msgstr "Pøedpokládám, ¾e hodiny reálného èasu jsou nastaveny na %s èas.\n"
#: hwclock/hwclock.c:224 hwclock/hwclock.c:318
msgid "UTC"
msgstr "greenwichský"
#: hwclock/hwclock.c:224 hwclock/hwclock.c:317
msgid "local"
msgstr "místní"
#: hwclock/hwclock.c:303
#, c-format
msgid "%s: Warning: unrecognized third line in adjtime file\n"
msgstr "%s: Varování: neznámý formát tøetího øádku v souboru adjtime\n"
#: hwclock/hwclock.c:305
msgid "(Expected: `UTC' or `LOCAL' or nothing.)\n"
msgstr "(Oèekáváno `UTC', `LOCAL' èi nic.)\n"
#: hwclock/hwclock.c:312
#, c-format
msgid "Last drift adjustment done at %ld seconds after 1969\n"
msgstr "Poslední oprava posunu probìhla %ld sekund od roku 1969.\n"
#: hwclock/hwclock.c:314
#, c-format
msgid "Last calibration done at %ld seconds after 1969\n"
msgstr "Poslední kalibrace probìhla %ld sekund od roku 1969.\n"
#: hwclock/hwclock.c:316
#, c-format
msgid "Hardware clock is on %s time\n"
msgstr "Hodiny reálného èasu jsou nastaveny na %s èas.\n"
#: hwclock/hwclock.c:318
msgid "unknown"
msgstr "neznámý"
#: hwclock/hwclock.c:342
msgid "Waiting for clock tick...\n"
msgstr "èekám na tiknutí hodin...\n"
#: hwclock/hwclock.c:346
msgid "...got clock tick\n"
msgstr "...hodiny tikly\n"
#: hwclock/hwclock.c:399
#, c-format
msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
msgstr ""
"Hodiny reálného èasu obsahují chybné hodnoty: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
#: hwclock/hwclock.c:407
#, c-format
msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgstr ""
"Hodiny reálného èasu: %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld sekund od roku "
"1969\n"
#: hwclock/hwclock.c:435
#, c-format
msgid "Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"
msgstr "Hodiny reálného èasu ukazují %4d/%.2d/%.2d %02d:%02d:%02d\n"
#: hwclock/hwclock.c:462
#, c-format
msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgstr ""
"Nastavuji hodiny reálného èasu na %.2d:%.2d:%.2d = %ld sekund od roku 1969\n"
#: hwclock/hwclock.c:468
msgid "Clock not changed - testing only.\n"
msgstr "Testovací re¾im - Èas nezmìnìn.\n"
#: hwclock/hwclock.c:516
#, c-format
msgid ""
"Time elapsed since reference time has been %.6f seconds.\n"
"Delaying further to reach the next full second.\n"
msgstr ""
"Poèet sekund uplynulých od referenèního èasu: %.6f.\n"
"Èekám, dokud neuplyne dal¹í celá sekunda.\n"
#: hwclock/hwclock.c:545
msgid ""
"The Hardware Clock registers contain values that are either invalid (e.g. "
"50th day of month) or beyond the range we can handle (e.g. Year 2095).\n"
msgstr ""
"Registry hodin reálného èasu obsahují hodnoty, které jsou buï chybné (napø.\n"
"50tý den v mìsíci), èi mimo pøípustný rozsah (napø. rok 2095).\n"
#: hwclock/hwclock.c:555
#, c-format
msgid "%s %.6f seconds\n"
msgstr "%s %.6f sekundy\n"
#: hwclock/hwclock.c:589
msgid "No --date option specified.\n"
msgstr "Pøepínaè --date vy¾aduje argument.\n"
#: hwclock/hwclock.c:595
#, fuzzy
msgid "--date argument too long\n"
msgstr "název ss je pøíli¹ dlouhý"
#: hwclock/hwclock.c:602
msgid ""
"The value of the --date option is not a valid date.\n"
"In particular, it contains quotation marks.\n"
msgstr ""
"Argument pøepínaèe --date není platným datem. Konkrétnì obsahuje uvozovky.\n"
#: hwclock/hwclock.c:610
#, c-format
msgid "Issuing date command: %s\n"
msgstr "Spou¹tím pøíkaz 'date': %s\n"
#: hwclock/hwclock.c:614
msgid "Unable to run 'date' program in /bin/sh shell. popen() failed"
msgstr "Pøíkaz 'date' nelze v shellu /bin/sh spustit. Volání popen() selhalo."
#: hwclock/hwclock.c:622
#, c-format
msgid "response from date command = %s\n"
msgstr "odpovìï pøíkazu 'date' = %s\n"
#: hwclock/hwclock.c:624
#, c-format
msgid ""
"The date command issued by %s returned unexpected results.\n"
"The command was:\n"
" %s\n"
"The response was:\n"
" %s\n"
msgstr ""
"Od pøíkazu 'date' spu¹tìného programem %s, pøi¹la neèekaná odpovìï.\n"
"Pøíkaz:\n"
" %s\n"
"Odpovìï:\n"
" %s\n"
#: hwclock/hwclock.c:636
#, c-format
msgid ""
"The date command issued by %s returned something other than an integer where "
"the converted time value was expected.\n"
"The command was:\n"
" %s\n"
"The response was:\n"
" %s\n"
msgstr ""
"Pøíkaz 'date' spu¹tìný programem %s místo pøevedeného èasu vrátil nìco,\n"
"co není celým èíslem.\n"
"Pøíkaz:\n"
" %s\n"
"Odpovìï:\n"
" %s\n"
#: hwclock/hwclock.c:647
#, c-format
msgid "date string %s equates to %ld seconds since 1969.\n"
msgstr "Datum %s odpovídá %ld sekundám od roku 1969.\n"
#: hwclock/hwclock.c:679
msgid ""
"The Hardware Clock does not contain a valid time, so we cannot set the "
"System Time from it.\n"
msgstr ""
"Systémový èas nelze podle hodin reálného èasu nastavit, proto¾e neukazují\n"
"platný èas.\n"
#: hwclock/hwclock.c:701
msgid "Calling settimeofday:\n"
msgstr "Volám settimeofday:\n"
#: hwclock/hwclock.c:702
#, c-format
msgid "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
msgstr "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
#: hwclock/hwclock.c:704
#, c-format
msgid "\ttz.tz_minuteswest = %d\n"
msgstr "\ttz.tz_minuteswest = %d\n"
#: hwclock/hwclock.c:707
msgid "Not setting system clock because running in test mode.\n"
msgstr "Testovací re¾im - systémový èas nezmìnìn.\n"
#: hwclock/hwclock.c:716
msgid "Must be superuser to set system clock.\n"
msgstr "Nastavit systémový èas mù¾e pouze superu¾ivatel.\n"
#: hwclock/hwclock.c:719
msgid "settimeofday() failed"
msgstr "volání settimeofday() selhalo"
#: hwclock/hwclock.c:749
msgid ""
"Not adjusting drift factor because the Hardware Clock previously contained "
"garbage.\n"
msgstr ""
"Neopravuji míru posunu, proto¾e hodiny reálného èasu poslednì obsahovaly\n"
"neplatné hodnoty.\n"
#: hwclock/hwclock.c:754
#, fuzzy
msgid ""
"Not adjusting drift factor because last calibration time is zero,\n"
"so history is bad and calibration startover is necessary.\n"
msgstr ""
"Neopravuji míru posunu, proto¾e poslední kalibrace je¹tì neuplynul celý "
"den.\n"
#: hwclock/hwclock.c:760
msgid ""
"Not adjusting drift factor because it has been less than a day since the "
"last calibration.\n"
msgstr ""
"Neopravuji míru posunu, proto¾e poslední kalibrace je¹tì neuplynul celý "
"den.\n"
#: hwclock/hwclock.c:808
#, fuzzy, c-format
msgid ""
"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor "
"of %f seconds/day.\n"
"Adjusting drift factor by %f seconds/day\n"
msgstr ""
"Hodiny se za posledních %2$d sekund roze¹ly o %1$d sekund, pøesto¾e míra "
"posunu\n"
"je nastavena na %3$f sekund/den.\n"
"Opravuji míru posunu o %4$f sekund.\n"
#: hwclock/hwclock.c:859
#, c-format
msgid "Time since last adjustment is %d seconds\n"
msgstr "Poèet sekund od poslední opravy: %d\n"
#: hwclock/hwclock.c:861
#, c-format
msgid "Need to insert %d seconds and refer time back %.6f seconds ago\n"
msgstr "Potøebná zmìna èasu: sekund vpøed: %d ; sekund zpìt: %.6f\n"
#: hwclock/hwclock.c:890
msgid "Not updating adjtime file because of testing mode.\n"
msgstr "Testovací re¾im - soubor adjtime nezmìnìn.\n"
#: hwclock/hwclock.c:891
#, c-format
msgid ""
"Would have written the following to %s:\n"
"%s"
msgstr ""
"Do %s by bylo ulo¾eno následující:\n"
"%s"
#: hwclock/hwclock.c:915
msgid "Drift adjustment parameters not updated.\n"
msgstr "Parametry opravy posunu nezmìnìny.\n"
#: hwclock/hwclock.c:956
msgid ""
"The Hardware Clock does not contain a valid time, so we cannot adjust it.\n"
msgstr "Hodiny reálného èasu obsahují neplatný èas, tudí¾ jej nelze opravit.\n"
#: hwclock/hwclock.c:988
msgid "Needed adjustment is less than one second, so not setting clock.\n"
msgstr "Potøebná oprava je men¹í ne¾ 1 sekunda, proto hodiny nenastavuji.\n"
#: hwclock/hwclock.c:1014
#, c-format
msgid "Using %s.\n"
msgstr "Pou¾ívám %s.\n"
#: hwclock/hwclock.c:1016
msgid "No usable clock interface found.\n"
msgstr "Nebylo nalezeno ¾ádné pou¾itelné rozhraní k hodinám.\n"
#: hwclock/hwclock.c:1112
msgid "Unable to set system clock.\n"
msgstr "Systémový èas nelze nastavit.\n"
#: hwclock/hwclock.c:1142
msgid ""
"The kernel keeps an epoch value for the Hardware Clock only on an Alpha "
"machine.\n"
"This copy of hwclock was built for a machine other than Alpha\n"
"(and thus is presumably not running on an Alpha now). No action taken.\n"
msgstr ""
"Jádro obsahuje hodnotu poèátku epochy pro hodiny reálného èasu pouze na "
"Alpha\n"
"systémech.\n"
"Tento program nebyl pøelo¾en pro Alpha systém ( a tudí¾ pravdìpodobnì nyní\n"
"nebì¾í na Alphì). Ignorováno.\n"
#: hwclock/hwclock.c:1151
msgid "Unable to get the epoch value from the kernel.\n"
msgstr "Poèátek epochy nelze z jádra zjistit.\n"
#: hwclock/hwclock.c:1153
#, c-format
msgid "Kernel is assuming an epoch value of %lu\n"
msgstr "Jádro pokládá za poèátek epochy %lu.\n"
#: hwclock/hwclock.c:1156
msgid ""
"To set the epoch value, you must use the 'epoch' option to tell to what "
"value to set it.\n"
msgstr "Poèátek epochy nastavíte pomocí pøepínaèù epoch a setepoch.\n"
#: hwclock/hwclock.c:1159
#, c-format
msgid "Not setting the epoch to %d - testing only.\n"
msgstr "Testovací re¾im - poèátek epochy na %d nemìním.\n"
#: hwclock/hwclock.c:1162
msgid "Unable to set the epoch value in the kernel.\n"
msgstr "Hodnotu poèátku epochy v jádøe nelze nastavit.\n"
#: hwclock/hwclock.c:1196
#, fuzzy, c-format
msgid ""
"hwclock - query and set the hardware clock (RTC)\n"
"\n"
"Usage: hwclock [function] [options...]\n"
"\n"
"Functions:\n"
" --help show this help\n"
" --show read hardware clock and print result\n"
" --set set the rtc to the time given with --date\n"
" --hctosys set the system time from the hardware clock\n"
" --systohc set the hardware clock to the current system time\n"
" --adjust adjust the rtc to account for systematic drift since \n"
" the clock was last set or adjusted\n"
" --getepoch print out the kernel's hardware clock epoch value\n"
" --setepoch set the kernel's hardware clock epoch value to the \n"
" value given with --epoch\n"
" --version print out the version of hwclock to stdout\n"
"\n"
"Options: \n"
" --utc the hardware clock is kept in coordinated universal time\n"
" --localtime the hardware clock is kept in local time\n"
" --directisa access the ISA bus directly instead of %s\n"
" --badyear ignore rtc's year because the bios is broken\n"
" --date specifies the time to which to set the hardware clock\n"
" --epoch=year specifies the year which is the beginning of the \n"
" hardware clock's epoch value\n"
" --noadjfile do not access /etc/adjtime. Requires the use of\n"
" either --utc or --localtime\n"
msgstr ""
"hwclock - nastavuje a zji¹»uje reálný èas (RTC)\n"
"\n"
"Pou¾ití: hwclock [funkce] [volby...]\n"
"\n"
"Funkce:\n"
" --help vypí¹e tuto nápovìdu\n"
" --show zjistí a vypí¹e aktuální stav hodin reálného èasu\n"
" --set nastaví RTC na hodnotu zadanou pøepínaèem --date\n"
" --hctosys nastaví systémový èas podle hodin reálného èasu\n"
" --systohc nastaví RTC podle aktuálního systémového èasu\n"
" --adjust opraví systematický posun, který nastal od poslední\n"
" opravy èi nastavení RTC\n"
" --getepoch vypí¹e poèátek epochy pro hodiny reálného èasu\n"
" --setepoch nastaví poèátek epochy pro hodiny reálného èasu na hodnotu\n"
" zadanou pøepínaèem --epoch\n"
" --version vypí¹e oznaèení verze\n"
"\n"
"Volby: \n"
" --utc hodiny reálného èasu jsou nastaveny na UTC\n"
" --localtime hodiny reálného èasu jsou nastaveny na místní èas\n"
" --directisa místo %s pou¾ije pøímo ISA sbìrnici\n"
" --badyear ignoruje rok RTC, proto¾e BIOS je chybný\n"
" --date èas, na který budou nastaveny hodiny reálného èasu\n"
" --epoch=ROK nastaví poèátek epochy pro hodiny reálného èasu na ROK\n"
#: hwclock/hwclock.c:1223
msgid ""
" --jensen, --arc, --srm, --funky-toy\n"
" tell hwclock the type of alpha you have (see hwclock(8))\n"
msgstr ""
" --jensen, --arc, --srm, --funky-toy\n"
" nastaví typ alpha systému (viz hwclock(8))\n"
#: hwclock/hwclock.c:1397
#, c-format
msgid "%s takes no non-option arguments. You supplied %d.\n"
msgstr ""
"%s akceptuje pouze pøepínaèe. Zadáno argumentù, které nejsou pøepínaèi: %d\n"
#: hwclock/hwclock.c:1403
#, fuzzy
msgid ""
"You have specified multiple functions.\n"
"You can only perform one function at a time.\n"
msgstr ""
"Zadal jste vícero funkèních pøepínaèù. Program mù¾e provést maximálnì jednu\n"
"funkci najednou.\n"
#: hwclock/hwclock.c:1410
#, c-format
msgid ""
"%s: The --utc and --localtime options are mutually exclusive. You specified "
"both.\n"
msgstr "%s: Pøepínaèe --utc a --localtime nelze pou¾ít zároveò.\n"
#: hwclock/hwclock.c:1417
#, fuzzy, c-format
msgid ""
"%s: The --adjust and --noadjfile options are mutually exclusive. You "
"specified both.\n"
msgstr "%s: Pøepínaèe --utc a --localtime nelze pou¾ít zároveò.\n"
#: hwclock/hwclock.c:1424
#, c-format
msgid "%s: With --noadjfile, you must specify either --utc or --localtime\n"
msgstr ""
#: hwclock/hwclock.c:1438
msgid "No usable set-to time. Cannot set clock.\n"
msgstr "Nebyl zadán platný èas, který mám nastavit. Hodiny nelze nastavit.\n"
#: hwclock/hwclock.c:1454
msgid "Sorry, only the superuser can change the Hardware Clock.\n"
msgstr "Hodiny reálného èasu mù¾e nastavit pouze superu¾ivatel.\n"
#: hwclock/hwclock.c:1459
msgid "Sorry, only the superuser can change the System Clock.\n"
msgstr "Hodiny reálného èasu mù¾e nastavit pouze superu¾ivatel.\n"
#: hwclock/hwclock.c:1464
msgid ""
"Sorry, only the superuser can change the Hardware Clock epoch in the "
"kernel.\n"
msgstr "Hodnotu poèátku epochy v jádøe mù¾e nastavit pouze superu¾ivatel.\n"
#: hwclock/hwclock.c:1484
msgid "Cannot access the Hardware Clock via any known method.\n"
msgstr ""
"®ádným ze známých zpùsobù nelze získat pøístup k hodinám reálného èasu.\n"
#: hwclock/hwclock.c:1488
msgid ""
"Use the --debug option to see the details of our search for an access "
"method.\n"
msgstr "Pro zji¹tìní podrobností pou¾ijte pøepínaè --debug.\n"
#: hwclock/kd.c:54
msgid "Waiting in loop for time from KDGHWCLK to change\n"
msgstr "Ve smyèce se pokou¹ím zjistit èas pomocí KDGHWCLK.\n"
#: hwclock/kd.c:57
msgid "KDGHWCLK ioctl to read time failed"
msgstr "volání KDGHWCLK ioctl selhalo."
#: hwclock/kd.c:78 hwclock/rtc.c:187
msgid "Timed out waiting for time change.\n"
msgstr "V Èasovém limitu se nepodaøilo zjistit èas.\n"
#: hwclock/kd.c:82
msgid "KDGHWCLK ioctl to read time failed in loop"
msgstr "volání KDGHWCLK ioctl ve smyèce selhalo."
#: hwclock/kd.c:104
#, c-format
msgid "ioctl() failed to read time from %s"
msgstr "èas se pomocí volání ioctl() pro %s nepodaøilo zjistit"
#: hwclock/kd.c:140
msgid "ioctl KDSHWCLK failed"
msgstr "volání ioctl KDSHWCLK selhalo"
#. probably KDGHWCLK exists on m68k only
#: hwclock/kd.c:176
msgid "Can't open /dev/tty1 or /dev/vc/1"
msgstr "/dev/tty1 ani /dev/vc/1 nelze otevøít"
#: hwclock/kd.c:180
msgid "KDGHWCLK ioctl failed"
msgstr "volání ioctl KDGHWCLK selhalo"
#: hwclock/rtc.c:115 hwclock/rtc.c:208
#, c-format
msgid "open() of %s failed"
msgstr "%s nelze otevøít - volání open() selhalo"
#: hwclock/rtc.c:149
#, c-format
msgid "ioctl() to %s to read the time failed.\n"
msgstr "èas se pomocí volání ioctl() pro %s nepodaøilo zjistit\n"
#: hwclock/rtc.c:171
#, c-format
msgid "Waiting in loop for time from %s to change\n"
msgstr "Èekám ve smyèce na zmìnu èasu z %s\n"
#: hwclock/rtc.c:226
#, c-format
msgid "%s does not have interrupt functions. "
msgstr "%s nemá pøeru¹ovací funkce. "
#: hwclock/rtc.c:237
#, c-format
msgid "read() to %s to wait for clock tick failed"
msgstr "tikání hodin nelze z %s èíst - volání read() selhalo"
#: hwclock/rtc.c:255
#, fuzzy, c-format
msgid "select() to %s to wait for clock tick failed"
msgstr "tikání hodin nelze z %s èíst - volání read() selhalo"
#: hwclock/rtc.c:258
#, fuzzy, c-format
msgid "select() to %s to wait for clock tick timed out\n"
msgstr "tikání hodin nelze z %s èíst - volání read() selhalo"
#: hwclock/rtc.c:267
#, c-format
msgid "ioctl() to %s to turn off update interrupts failed"
msgstr "obnovovací pøeru¹ení nelze vypnout - volání ioctl() pro %s selhalo"
#: hwclock/rtc.c:270
#, c-format
msgid "ioctl() to %s to turn on update interrupts failed unexpectedly"
msgstr "obnovovací pøeru¹ení nelze zapnout - volání ioctl() pro %s selhalo"
#: hwclock/rtc.c:329
#, c-format
msgid "ioctl() to %s to set the time failed.\n"
msgstr "Èas nelze nastavit - volání ioctl() pro %s selhalo.\n"
#: hwclock/rtc.c:335
#, c-format
msgid "ioctl(%s) was successful.\n"
msgstr "Volání ioctl(%s) bylo úspì¹né.\n"
#: hwclock/rtc.c:364
#, c-format
msgid "Open of %s failed"
msgstr "%s nelze otevøít."
#: hwclock/rtc.c:382 hwclock/rtc.c:428
#, c-format
msgid ""
"To manipulate the epoch value in the kernel, we must access the Linux 'rtc' "
"device driver via the device special file %s. This file does not exist on "
"this system.\n"
msgstr ""
"Pro zmìnu hodnoty poèátku epochy v jádøe je nutné pou¾ít 'rtc' ovladaè "
"pomocí\n"
"zvlá¹tního souboru %s. Tento soubor na tomto systému souborù neexistuje.\n"
#: hwclock/rtc.c:387 hwclock/rtc.c:433
#, c-format
msgid "Unable to open %s"
msgstr "%s nelze otevøít"
#: hwclock/rtc.c:394
#, c-format
msgid "ioctl(RTC_EPOCH_READ) to %s failed"
msgstr "volání(RTC_EPOCH_READ) pro %s selhalo"
#: hwclock/rtc.c:400
#, c-format
msgid "we have read epoch %ld from %s with RTC_EPOCH_READ ioctl.\n"
msgstr ""
"Z %2$s byl pomocí RTC_EPOCH_READ ioctl zji¹tìn poèátek epochy (%1$ld).\n"
#. kernel would not accept this epoch value
#. Hmm - bad habit, deciding not to do what the user asks
#. just because one believes that the kernel might not like it.
#: hwclock/rtc.c:420
#, c-format
msgid "The epoch value may not be less than 1900. You requested %ld\n"
msgstr "Hodnota poèátku epochy nesmí být men¹í ne¾ 1900 (po¾adováno %ld).\n"
#: hwclock/rtc.c:438
#, c-format
msgid "setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n"
msgstr ""
"Nastavuji pomocí RTC_EPOCH_SET ioctl pro %2$s poèátek epochy na %1$ld.\n"
#: hwclock/rtc.c:443
#, c-format
msgid ""
"The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n"
msgstr "Ovladaè jádra pro %s nepodporuje RTC_EPOCH_SET ioctl.\n"
#: hwclock/rtc.c:446
#, c-format
msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgstr "volání ioctl(RTC_EPOCH_SET) pro %s selhalo"
#: login-utils/agetty.c:312
msgid "calling open_tty\n"
msgstr "volám open_tty\n"
#. Initialize the termio settings (raw mode, eight-bit, blocking i/o).
#: login-utils/agetty.c:325
msgid "calling termio_init\n"
msgstr "volám termio_init\n"
#: login-utils/agetty.c:330
msgid "writing init string\n"
msgstr "zapisuji inicializaèní øetìzec\n"
#. Optionally detect the baud rate from the modem status message.
#: login-utils/agetty.c:340
msgid "before autobaud\n"
msgstr "pøed autobaud\n"
#: login-utils/agetty.c:352
msgid "waiting for cr-lf\n"
msgstr "èekám na cr-lf\n"
#: login-utils/agetty.c:356
#, c-format
msgid "read %c\n"
msgstr "pøeèteno %c\n"
#. Read the login name.
#: login-utils/agetty.c:365
msgid "reading login name\n"
msgstr "ètu pøihla¹ovací jméno\n"
#: login-utils/agetty.c:386
#, c-format
msgid "%s: can't exec %s: %m"
msgstr "%s: %s nelze spustit: %m"
#: login-utils/agetty.c:406
msgid "can't malloc initstring"
msgstr "pamì» pro inicializaèní øetìzec nelze alokovat"
#: login-utils/agetty.c:471
#, c-format
msgid "bad timeout value: %s"
msgstr "chybný èasový limit: %s"
#: login-utils/agetty.c:480
msgid "after getopt loop\n"
msgstr "po zpracování argumentù pøíkazové øádky\n"
#: login-utils/agetty.c:530
msgid "exiting parseargs\n"
msgstr "opou¹tím funkci parseargs\n"
#: login-utils/agetty.c:542
msgid "entered parse_speeds\n"
msgstr "vstupuji do funkce parse_speeds\n"
#: login-utils/agetty.c:545
#, c-format
msgid "bad speed: %s"
msgstr "chybná rychlost %s"
#: login-utils/agetty.c:547
msgid "too many alternate speeds"
msgstr "pøíli¹ mnoho alternativních rychlostí"
#: login-utils/agetty.c:549
msgid "exiting parsespeeds\n"
msgstr "opou¹tím funkci parsespeeds\n"
#: login-utils/agetty.c:649
#, c-format
msgid "/dev: chdir() failed: %m"
msgstr "/dev: volání chdir() selhalo: %m"
#: login-utils/agetty.c:653
#, c-format
msgid "/dev/%s: not a character device"
msgstr "/dev/%s není znakovým zaøízením"
#. ignore close(2) errors
#: login-utils/agetty.c:660
msgid "open(2)\n"
msgstr "open(2)\n"
#: login-utils/agetty.c:662
#, c-format
msgid "/dev/%s: cannot open as standard input: %m"
msgstr "/dev/%s nelze otevøít jako standardní vstup: %m"
#: login-utils/agetty.c:672
#, c-format
msgid "%s: not open for read/write"
msgstr "%s: není otevøeno pro ètení/zápis"
#. Set up standard output and standard error file descriptors.
#: login-utils/agetty.c:676
msgid "duping\n"
msgstr "volám dup\n"
#. set up stdout and stderr
#: login-utils/agetty.c:678
#, c-format
msgid "%s: dup problem: %m"
msgstr "%s: volání dup selhalo: %m"
#: login-utils/agetty.c:752
msgid "term_io 2\n"
msgstr "term_io 2\n"
#: login-utils/agetty.c:937
msgid "user"
msgstr "u¾ivatel"
#: login-utils/agetty.c:937
msgid "users"
msgstr "u¾ivatelé"
#: login-utils/agetty.c:1025
#, c-format
msgid "%s: read: %m"
msgstr "%s: pøeèteno: %m"
#: login-utils/agetty.c:1071
#, c-format
msgid "%s: input overrun"
msgstr "%s: pøeteèení vstupu"
#: login-utils/agetty.c:1195
#, c-format
msgid ""
"Usage: %s [-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H "
"login_host] baud_rate,... line [termtype]\n"
"or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] "
"line baud_rate,... [termtype]\n"
msgstr ""
"Pou¾ití: %s [-hiLmw] [-l login_program] [-t èasový limit] [-I inicializaèní "
"øetìzec] [-H poèítaè] baud_rate,... linka [typ terminálu]\n"
"èi\t[-hiLmw] [-l login_program] [-t èasový limit] [-I inicializaèní øetìzec] "
"[-H poèítaè] linka baud_rate,... [typ terminálu]\n"
#: login-utils/checktty.c:104 login-utils/checktty.c:125
msgid "login: memory low, login may fail\n"
msgstr "login: nedostatek pamìti, pøihlá¹ení se nemusí zdaøit\n"
#: login-utils/checktty.c:105
msgid "can't malloc for ttyclass"
msgstr "pamì» pro ttyclass nelze alokovat"
#: login-utils/checktty.c:126
msgid "can't malloc for grplist"
msgstr "pamì» pro grplist nelze alokovat"
#. there was a default rule, but user didn't match, reject!
#: login-utils/checktty.c:422
#, c-format
msgid "Login on %s from %s denied by default.\n"
msgstr "Pøihlá¹ení z %2$s na tty %1$s implicitnì odmítnuto.\n"
#. if we get here, /etc/usertty exists, there's a line
#. matching our username, but it doesn't contain the
#. name of the tty where the user is trying to log in.
#. So deny access!
#: login-utils/checktty.c:433
#, c-format
msgid "Login on %s from %s denied.\n"
msgstr "Pøihlá¹ení z $2%s na $1%s odmítnuto.\n"
#: login-utils/chfn.c:128 login-utils/chsh.c:113
#, c-format
msgid "%s: you (user %d) don't exist.\n"
msgstr "%s: vy (u¾ivatel %d) neexistujete.\n"
#: login-utils/chfn.c:135 login-utils/chsh.c:120
#, c-format
msgid "%s: user \"%s\" does not exist.\n"
msgstr "%s: u¾ivatel \"%s\" neexistuje.\n"
#: login-utils/chfn.c:140 login-utils/chsh.c:125
#, c-format
msgid "%s: can only change local entries; use yp%s instead.\n"
msgstr "%s: mù¾e mìnit pouze místní polo¾ky; pou¾ijte yp%s.\n"
#: login-utils/chfn.c:151 login-utils/chsh.c:136
msgid "Unknown user context"
msgstr ""
#: login-utils/chfn.c:152
#, c-format
msgid "%s: %s is not authorized to change the finger info of %s\n"
msgstr ""
#: login-utils/chfn.c:159 login-utils/chsh.c:144
#, c-format
msgid "%s: Can't set default context for /etc/passwd"
msgstr ""
#: login-utils/chfn.c:173
#, c-format
msgid "Changing finger information for %s.\n"
msgstr "Mìním finger informace o u¾ivateli %s.\n"
#: login-utils/chfn.c:179 login-utils/chfn.c:183 login-utils/chfn.c:190
#: login-utils/chfn.c:194 login-utils/chsh.c:176 login-utils/chsh.c:180
#: login-utils/chsh.c:187 login-utils/chsh.c:191
msgid "Password error."
msgstr "Chybné heslo."
#: login-utils/chfn.c:203 login-utils/chsh.c:200 login-utils/login.c:774
#: login-utils/newgrp.c:48 login-utils/simpleinit.c:338 mount/lomount.c:293
#: mount/lomount.c:296
msgid "Password: "
msgstr "Heslo: "
#: login-utils/chfn.c:206 login-utils/chsh.c:203
msgid "Incorrect password."
msgstr "Chybné heslo."
#: login-utils/chfn.c:217
msgid "Finger information not changed.\n"
msgstr "Finger informace nebyly zmìnìny.\n"
#: login-utils/chfn.c:319
#, c-format
msgid "Usage: %s [ -f full-name ] [ -o office ] "
msgstr "Pou¾ití: %s [ -f plné-jméno ] [ -o kanceláø ] "
#: login-utils/chfn.c:320
msgid ""
"[ -p office-phone ]\n"
"\t[ -h home-phone ] "
msgstr ""
"[ -p telefon-do-kanceláøe ]\n"
"\t[ -h telefon-domù ] "
#: login-utils/chfn.c:321
msgid "[ --help ] [ --version ]\n"
msgstr "[ --help ] [ -- version ]\n"
#: login-utils/chfn.c:392 login-utils/chsh.c:311
msgid ""
"\n"
"Aborted.\n"
msgstr ""
"\n"
"Ukonèen.\n"
#: login-utils/chfn.c:425
msgid "field is too long.\n"
msgstr "Polo¾ka je pøíli¹ dlouhá.\n"
#: login-utils/chfn.c:433
#, c-format
msgid "'%c' is not allowed.\n"
msgstr "'%c' není povoleno.\n"
#: login-utils/chfn.c:438
msgid "Control characters are not allowed.\n"
msgstr "Kontrolní znaky nejsou povoleny.\n"
#: login-utils/chfn.c:503
msgid "Finger information *NOT* changed. Try again later.\n"
msgstr "Finger informace *NEBYLY* zmìnìny. Zkuste to opìt pozdìji.\n"
#: login-utils/chfn.c:506
msgid "Finger information changed.\n"
msgstr "Finger informace byly zmìnìny.\n"
#: login-utils/chfn.c:520 login-utils/chsh.c:426 sys-utils/cytune.c:322
msgid "malloc failed"
msgstr "volání malloc selhalo"
#: login-utils/chsh.c:137
#, fuzzy, c-format
msgid "%s: %s is not authorized to change the shell of %s\n"
msgstr "%s: \"%s\" není v /etc/shells.\n"
#: login-utils/chsh.c:157
#, c-format
msgid ""
"%s: Running UID doesn't match UID of user we're altering, shell change "
"denied\n"
msgstr ""
#: login-utils/chsh.c:163
#, c-format
msgid "%s: Your shell is not in /etc/shells, shell change denied\n"
msgstr "%s: Vá¹ shell není v /etc/shells, zmìna shellu odmítnuta\n"
#: login-utils/chsh.c:170
#, c-format
msgid "Changing shell for %s.\n"
msgstr "Mìním shell pro %s.\n"
#: login-utils/chsh.c:211
msgid "New shell"
msgstr "Nový shell"
#: login-utils/chsh.c:218
msgid "Shell not changed.\n"
msgstr "Shell nebyl zmìnìn.\n"
#: login-utils/chsh.c:225
msgid "Shell *NOT* changed. Try again later.\n"
msgstr "Shell *NEBYL* zmìnìn. Zkuste to opìt pozdìji.\n"
#: login-utils/chsh.c:228
msgid "Shell changed.\n"
msgstr "Shell byl zmìnìn.\n"
#: login-utils/chsh.c:293
#, c-format
msgid ""
"Usage: %s [ -s shell ] [ --list-shells ] [ --help ] [ --version ]\n"
" [ username ]\n"
msgstr ""
"Pou¾ití: %s [ -s shell ] [ --list-shells ] [ --help ] [ --version ]\n"
" [ u¾ivatelské jméno ]\n"
#: login-utils/chsh.c:336
#, c-format
msgid "%s: shell must be a full path name.\n"
msgstr "%s: shell musí být zadán úplným jménem cesty.\n"
#: login-utils/chsh.c:340
#, c-format
msgid "%s: \"%s\" does not exist.\n"
msgstr "%s: \"%s\" neexistuje.\n"
#: login-utils/chsh.c:344
#, c-format
msgid "%s: \"%s\" is not executable.\n"
msgstr "%s: \"%s\" není spustitelným souborem.\n"
#: login-utils/chsh.c:351
#, c-format
msgid "%s: '%c' is not allowed.\n"
msgstr "%s: '%c' není povoleno.\n"
#: login-utils/chsh.c:355
#, c-format
msgid "%s: Control characters are not allowed.\n"
msgstr "%s: Kontrolní znaky nejsou povoleny.\n"
#: login-utils/chsh.c:362
#, c-format
msgid "Warning: \"%s\" is not listed in /etc/shells\n"
msgstr "Varování: \"%s\" není v /etc/shells\n"
#: login-utils/chsh.c:364
#, c-format
msgid "%s: \"%s\" is not listed in /etc/shells.\n"
msgstr "%s: \"%s\" není v /etc/shells.\n"
#: login-utils/chsh.c:366
#, c-format
msgid "%s: use -l option to see list\n"
msgstr "%s: pou¾ijte pøepínaè -l pro vypsání seznamu\n"
#: login-utils/chsh.c:372
#, c-format
msgid "Warning: \"%s\" is not listed in /etc/shells.\n"
msgstr "Varování: \"%s\" není v /etc/shells.\n"
#: login-utils/chsh.c:373
#, c-format
msgid "Use %s -l to see list.\n"
msgstr "Pou¾ijte %s -l pro vypsání seznamu\n"
#: login-utils/chsh.c:393
msgid "No known shells.\n"
msgstr "Není znám ¾ádný shell.\n"
#: login-utils/cryptocard.c:68
msgid "couldn't open /dev/urandom"
msgstr "/dev/urandom nelze otevøít"
#: login-utils/cryptocard.c:73
msgid "couldn't read random data from /dev/urandom"
msgstr "náhodná data z /dev/urandom nelze èíst"
#: login-utils/cryptocard.c:96
#, c-format
msgid "can't open %s for reading"
msgstr "%s pro ètení nelze otevøít"
#: login-utils/cryptocard.c:100
#, c-format
msgid "can't stat(%s)"
msgstr "volání stat(%s) selhalo"
#: login-utils/cryptocard.c:106
#, c-format
msgid "%s doesn't have the correct filemodes"
msgstr "%s má chybná pøístupová práva"
#: login-utils/cryptocard.c:111
#, c-format
msgid "can't read data from %s"
msgstr "data z %s nelze èíst"
#: login-utils/islocal.c:38
#, c-format
msgid "Can't read %s, exiting."
msgstr "%s nelze èíst, konèím."
#: login-utils/last.c:148
msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n"
msgstr ""
"Pou¾ití: last [-#] [-f soubor] [-t tty] [-h název poèítaèe]\n"
" [u¾ivatel ...]\n"
#: login-utils/last.c:312
msgid " still logged in"
msgstr " stále pøihlá¹en"
#: login-utils/last.c:340
#, c-format
msgid ""
"\n"
"wtmp begins %s"
msgstr ""
"\n"
"wtmp zaèíná %s"
#: login-utils/last.c:396 login-utils/last.c:414 login-utils/last.c:465
msgid "last: malloc failure.\n"
msgstr "last: volání malloc selhalo.\n"
#: login-utils/last.c:441
msgid "last: gethostname"
msgstr "last: gethostname"
#: login-utils/last.c:490
#, c-format
msgid ""
"\n"
"interrupted %10.10s %5.5s \n"
msgstr ""
"\n"
"pøeru¹en %10.10s %5.5s \n"
#: login-utils/login.c:254
#, fuzzy, c-format
msgid "FATAL: can't reopen tty: %s"
msgstr "mount: %s nelze otevøít: %s"
#: login-utils/login.c:285
msgid "FATAL: bad tty"
msgstr ""
#: login-utils/login.c:418
msgid "login: -h for super-user only.\n"
msgstr "login: pøepínaè -h mù¾e pou¾ít pouze superu¾ivatel\n"
#: login-utils/login.c:445
msgid "usage: login [-fp] [username]\n"
msgstr "Pou¾ití: login [fp] [u¾ivatelské jméno]\n"
#: login-utils/login.c:538
#, c-format
msgid "login: PAM Failure, aborting: %s\n"
msgstr "login: chyba PAM, konèím: %s\n"
#: login-utils/login.c:540
#, c-format
msgid "Couldn't initialize PAM: %s"
msgstr "PAM nelze inicializovat: %s"
#.
#. * Andrew.Taylor@cal.montage.ca: Provide a user prompt to PAM
#. * so that the "login: " prompt gets localized. Unfortunately,
#. * PAM doesn't have an interface to specify the "Password: " string
#. * (yet).
#.
#: login-utils/login.c:557
msgid "login: "
msgstr "Pøihla¹ovací jméno:"
#: login-utils/login.c:597
#, c-format
msgid "FAILED LOGIN %d FROM %s FOR %s, %s"
msgstr "%1$d. CHYBNÉ PØIHLÁ©ENÍ U®IVATELE %3$s Z %2$s, %4$s"
#: login-utils/login.c:601
msgid ""
"Login incorrect\n"
"\n"
msgstr ""
"Chybné pøihlá¹ení\n"
"\n"
#: login-utils/login.c:610
#, c-format
msgid "TOO MANY LOGIN TRIES (%d) FROM %s FOR %s, %s"
msgstr "PØÍLI© MNOHO (%1$d) POKUSÙ U®IVATELE %3$s O PØIHLÁ©ENÍ Z %2$s, %4$s"
#: login-utils/login.c:614
#, c-format
msgid "FAILED LOGIN SESSION FROM %s FOR %s, %s"
msgstr "NEÚSPÌ©NÉ PØIHLÁ©ENÍ U®IVATELE %2$s Z %1$s, %3$s"
#: login-utils/login.c:618
msgid ""
"\n"
"Login incorrect\n"
msgstr ""
"\n"
"Chybné pøihlá¹ení\n"
#: login-utils/login.c:640 login-utils/login.c:647 login-utils/login.c:681
msgid ""
"\n"
"Session setup problem, abort.\n"
msgstr ""
#: login-utils/login.c:641
#, c-format
msgid "NULL user name in %s:%d. Abort."
msgstr ""
#: login-utils/login.c:648
#, c-format
msgid "Invalid user name \"%s\" in %s:%d. Abort."
msgstr ""
#: login-utils/login.c:667
#, fuzzy
msgid "login: Out of memory\n"
msgstr "%s: Nedostatek pamìti!\n"
#: login-utils/login.c:709
msgid "Illegal username"
msgstr "Chybné u¾ivatelské jméno"
#: login-utils/login.c:752
#, c-format
msgid "%s login refused on this terminal.\n"
msgstr "pøihlá¹ení u¾ivatele %s na tomto terminálu odmítnuto\n"
#: login-utils/login.c:757
#, c-format
msgid "LOGIN %s REFUSED FROM %s ON TTY %s"
msgstr "PØIHLÁ©ENÍ U®IVATELE %s Z %s NA TTY %s ODMÍTNUTO"
#: login-utils/login.c:761
#, c-format
msgid "LOGIN %s REFUSED ON TTY %s"
msgstr "PØIHLÁ©ENÍ U®IVATELE %s NA TTY %s ODMÍTNUTO"
#: login-utils/login.c:814
msgid "Login incorrect\n"
msgstr "Chybné pøihlá¹ení\n"
#: login-utils/login.c:836
msgid ""
"Too many users logged on already.\n"
"Try again later.\n"
msgstr ""
"Ji¾ je pøihlá¹eno pøíli¹ mnoho u¾ivatelù.\n"
"Zkuste to opìt pozdìji.\n"
#: login-utils/login.c:840
msgid "You have too many processes running.\n"
msgstr "Máte spu¹tìno pøíli¹ mnoho procesù.\n"
#: login-utils/login.c:1063
#, c-format
msgid "DIALUP AT %s BY %s"
msgstr "PØÍSTUP U®IVATELE %2$s VYTÁÈENOU LINKOU NA TTY %1$s"
#: login-utils/login.c:1070
#, c-format
msgid "ROOT LOGIN ON %s FROM %s"
msgstr "PØIHLÁ©ENÍ U®IVATELE ROOT Z %2$s NA TTY %1$s"
#: login-utils/login.c:1073
#, c-format
msgid "ROOT LOGIN ON %s"
msgstr "PØIHLÁ©ENÍ U®IVATELE ROOT NA TTY %s"
#: login-utils/login.c:1076
#, c-format
msgid "LOGIN ON %s BY %s FROM %s"
msgstr "PØIHLÁ©ENÍ U®IVATELE %2$s Z %3$s NA TTY %1$s"
#: login-utils/login.c:1079
#, c-format
msgid "LOGIN ON %s BY %s"
msgstr "PØIHLÁ©ENÍ U®IVATELE %2$s NA TTY %1$s"
#: login-utils/login.c:1100
#, fuzzy
msgid "You have new mail.\n"
msgstr "Máte %spo¹tu.\n"
#: login-utils/login.c:1102
#, fuzzy
msgid "You have mail.\n"
msgstr "Máte %spo¹tu.\n"
#. error in fork()
#: login-utils/login.c:1122
#, c-format
msgid "login: failure forking: %s"
msgstr "login: volání fork selhalo: %s"
#: login-utils/login.c:1159
#, c-format
msgid "TIOCSCTTY failed: %m"
msgstr ""
#: login-utils/login.c:1165
msgid "setuid() failed"
msgstr "volání setuid() selhalo"
#: login-utils/login.c:1171
#, c-format
msgid "No directory %s!\n"
msgstr "Adresáø %s neexistuje!\n"
#: login-utils/login.c:1175
msgid "Logging in with home = \"/\".\n"
msgstr "Pøihla¹uji s domácím adresáøem nastaveným na \"/\".\n"
#: login-utils/login.c:1183
msgid "login: no memory for shell script.\n"
msgstr "login: nedostatek pamìti pro skript shellu.\n"
#: login-utils/login.c:1210
#, c-format
msgid "login: couldn't exec shell script: %s.\n"
msgstr "login: skript shellu %s nelze spustit.\n"
#: login-utils/login.c:1213
#, c-format
msgid "login: no shell: %s.\n"
msgstr "login: ¾ádný shell: %s.\n"
#: login-utils/login.c:1228
#, c-format
msgid ""
"\n"
"%s login: "
msgstr ""
"\n"
"Pøihla¹ovací jméno na %s: "
#: login-utils/login.c:1239
msgid "login name much too long.\n"
msgstr "pøihla¹ovací jméno je pøíli¹ dlouhé.\n"
#: login-utils/login.c:1240
msgid "NAME too long"
msgstr "JMÉNO je pøíli¹ dlouhé"
#: login-utils/login.c:1247
msgid "login names may not start with '-'.\n"
msgstr "pøihla¹ovací jméno nesmí zaèínat '-'.\n"
#: login-utils/login.c:1257
msgid "too many bare linefeeds.\n"
msgstr "pøíli¹ mnoho znakù LF\n"
#: login-utils/login.c:1258
msgid "EXCESSIVE linefeeds"
msgstr "PØÍLI© mnoho znakù LF"
#: login-utils/login.c:1290
#, c-format
msgid "Login timed out after %d seconds\n"
msgstr "Vypr¹el èasový limit (%d sekund) pro pøihlá¹ení.\n"
#: login-utils/login.c:1378
#, c-format
msgid "Last login: %.*s "
msgstr "Poslední pøihlá¹ení: %.*s "
#: login-utils/login.c:1382
#, c-format
msgid "from %.*s\n"
msgstr "z %.*s\n"
#: login-utils/login.c:1385
#, c-format
msgid "on %.*s\n"
msgstr "%.*s\n"
#: login-utils/login.c:1405
#, c-format
msgid "LOGIN FAILURE FROM %s, %s"
msgstr "CHYBNÉ PØIHLÁ©ENÍ U®IVATELE %2$s Z %1$s"
#: login-utils/login.c:1408
#, c-format
msgid "LOGIN FAILURE ON %s, %s"
msgstr "CHYBNÉ PØIHLÁ©ENÍ U®IVATELE %2$s NA TTY %1$s"
#: login-utils/login.c:1412
#, c-format
msgid "%d LOGIN FAILURES FROM %s, %s"
msgstr "POÈET CHYBNÝCH PØIHLÁ©ENÍ U®IVATELE %3$s Z %2$s: %1$d"
#: login-utils/login.c:1415
#, c-format
msgid "%d LOGIN FAILURES ON %s, %s"
msgstr "POÈET CHYBNÝCH PØIHLÁ©ENÍ U®IVATELE %3$s NA TTY %2$s: %1$d"
#: login-utils/mesg.c:89
msgid "is y\n"
msgstr "pøíjem zpráv je zapnut\n"
#: login-utils/mesg.c:92
msgid "is n\n"
msgstr "pøíjem zpráv je vypnut\n"
#: login-utils/mesg.c:112
msgid "usage: mesg [y | n]\n"
msgstr "Pou¾ití: mesg [y | n]\n"
#: login-utils/newgrp.c:68
msgid "newgrp: Who are you?"
msgstr "newgrp: Kdo jste?"
#: login-utils/newgrp.c:76 login-utils/newgrp.c:86
msgid "newgrp: setgid"
msgstr "newgrp: setgid"
#: login-utils/newgrp.c:81
msgid "newgrp: No such group."
msgstr "newgrp: ®ádná taková skupina neexistuje."
#: login-utils/newgrp.c:90
msgid "newgrp: Permission denied"
msgstr "newgrp: Pøístup odmítnut"
#: login-utils/newgrp.c:97
msgid "newgrp: setuid"
msgstr "newgrp: setuid"
#: login-utils/newgrp.c:103
msgid "No shell"
msgstr "®ádný shell"
#: login-utils/passwd.c:161
msgid "The password must have at least 6 characters, try again.\n"
msgstr "Heslo musí obsahovat alespoò 6 znakù, zkuste to znovu.\n"
#: login-utils/passwd.c:174
msgid ""
"The password must contain characters out of two of the following\n"
"classes: upper and lower case letters, digits and non alphanumeric\n"
"characters. See passwd(1) for more information.\n"
msgstr ""
#: login-utils/passwd.c:183
msgid "You cannot reuse the old password.\n"
msgstr "Nemù¾ete opìt pou¾ít staré heslo.\n"
#: login-utils/passwd.c:188
msgid "Please don't use something like your username as password!\n"
msgstr ""
"Nepou¾ívejte, jako heslo Va¹e u¾ivatelské jméno ani nic nìco podobného.\n"
#: login-utils/passwd.c:199 login-utils/passwd.c:206
msgid "Please don't use something like your realname as password!\n"
msgstr "Nepou¾ívejte, jako heslo Va¹e skuteèné jméno ani nic nìco podobného.\n"
#: login-utils/passwd.c:224
msgid "Usage: passwd [username [password]]\n"
msgstr "Pou¾ití: password [u¾ivatelské jméno [heslo]]\n"
#: login-utils/passwd.c:225
msgid "Only root may use the one and two argument forms.\n"
msgstr "Pouze superu¾ivatel mù¾e pou¾ít argumenty.\n"
#: login-utils/passwd.c:280
msgid "Usage: passwd [-foqsvV] [user [password]]\n"
msgstr "Pou¾ití: passwd [foqsvV] [u¾ivatel [heslo]]\n"
#: login-utils/passwd.c:301
#, c-format
msgid "Can't exec %s: %s\n"
msgstr "%s nelze spustit: %s\n"
#: login-utils/passwd.c:312
msgid "Cannot find login name"
msgstr "Pøihla¹ovací jméno nelze nalézt"
#: login-utils/passwd.c:319 login-utils/passwd.c:326
msgid "Only root can change the password for others.\n"
msgstr "Pouze superu¾ivatel mù¾e zmìnit hesla jiným u¾ivatelùm.\n"
#: login-utils/passwd.c:334
msgid "Too many arguments.\n"
msgstr "Pøíli¹ mnoho argumentù.\n"
#: login-utils/passwd.c:339
#, c-format
msgid "Can't find username anywhere. Is `%s' really a user?"
msgstr "U¾ivatelské jméno nelze nalézt. Je `%s' opravdu u¾ivatelem?"
#: login-utils/passwd.c:343
msgid "Sorry, I can only change local passwords. Use yppasswd instead."
msgstr "Lituji, ale mohu zmìnit pouze místní hesla. Pou¾ijte yppasswd."
#: login-utils/passwd.c:349
msgid "UID and username does not match, imposter!"
msgstr "UID a u¾ivatelské jméno se neshodují!"
#: login-utils/passwd.c:354
#, c-format
msgid "Changing password for %s\n"
msgstr "Mìním heslo u¾ivatele %s\n"
#: login-utils/passwd.c:358
msgid "Enter old password: "
msgstr "Zadejte staré heslo: "
#: login-utils/passwd.c:360
msgid "Illegal password, imposter."
msgstr "Nepovolené heslo."
#: login-utils/passwd.c:372
msgid "Enter new password: "
msgstr "Zadejte nové heslo: "
#: login-utils/passwd.c:374
msgid "Password not changed."
msgstr "Heslo nebylo zmìnìno."
#: login-utils/passwd.c:383
msgid "Re-type new password: "
msgstr "Potvrïte nové heslo: "
#: login-utils/passwd.c:386
msgid "You misspelled it. Password not changed."
msgstr "Pøepsal jste se. Heslo nebylo zmìnìno."
#: login-utils/passwd.c:401
#, c-format
msgid "password changed, user %s"
msgstr "heslo bylo zmìnìno, u¾ivatel %s"
#: login-utils/passwd.c:404
msgid "ROOT PASSWORD CHANGED"
msgstr "HESLO U®IVATELE ROOT BYLO ZMÌNÌNO"
#: login-utils/passwd.c:406
#, c-format
msgid "password changed by root, user %s"
msgstr "heslo zmìnìno u¾ivatelem root, u¾ivatel %s"
#: login-utils/passwd.c:413
msgid "calling setpwnam to set password.\n"
msgstr "Volám setpwnam pro nastavení hesla.\n"
#: login-utils/passwd.c:417
msgid "Password *NOT* changed. Try again later.\n"
msgstr "Heslo *NEBYLO* zmìnìno. Zkuste to pozdìji.\n"
#: login-utils/passwd.c:423
msgid "Password changed.\n"
msgstr "Heslo bylo zmìnìno.\n"
#: login-utils/shutdown.c:113
msgid "Usage: shutdown [-h|-r] [-fqs] [now|hh:ss|+mins]\n"
msgstr "Pou¾ití: shutdown [-h|-r] [-fqs] [now|hh:ss|+minuty]\n"
#: login-utils/shutdown.c:131
msgid "Shutdown process aborted"
msgstr "Proces shutdown ukonèen"
#: login-utils/shutdown.c:162
#, c-format
msgid "%s: Only root can shut a system down.\n"
msgstr "%s: Pouze superu¾ivatel mù¾e vypnout systém.\n"
#: login-utils/shutdown.c:256
msgid "That must be tomorrow, can't you wait till then?\n"
msgstr "To bude zítra. To do té doby nemù¾ete poèkat?\n"
#: login-utils/shutdown.c:307
msgid "for maintenance; bounce, bounce"
msgstr "kvùli údr¾bì"
#: login-utils/shutdown.c:311
#, c-format
msgid "timeout = %d, quiet = %d, reboot = %d\n"
msgstr "èasový limit = %d, klid = %d, restart = %d\n"
#: login-utils/shutdown.c:336
msgid "The system is being shut down within 5 minutes"
msgstr "Systém bude za 5 minut vypnut"
#: login-utils/shutdown.c:340
msgid "Login is therefore prohibited."
msgstr "Pøihla¹ování je tudí¾ zakázáno."
#: login-utils/shutdown.c:362
#, fuzzy, c-format
msgid "rebooted by %s: %s"
msgstr "%s u¾ivatelem %s: %s"
#: login-utils/shutdown.c:365
#, fuzzy, c-format
msgid "halted by %s: %s"
msgstr "%s u¾ivatelem %s: %s"
#. RB_AUTOBOOT
#: login-utils/shutdown.c:429
msgid ""
"\n"
"Why am I still alive after reboot?"
msgstr ""
"\n"
"Proè jsem po restartu stále na¾ivu?"
#: login-utils/shutdown.c:431
msgid ""
"\n"
"Now you can turn off the power..."
msgstr ""
"\n"
"Nyní mù¾ete vypnout proud..."
#: login-utils/shutdown.c:447
msgid "Calling kernel power-off facility...\n"
msgstr "Volám zaøízení jádra pro vypínání proudu...\n"
#: login-utils/shutdown.c:450
#, c-format
msgid "Error powering off\t%s\n"
msgstr "Chyba pøi vypínání proudu\t%s\n"
#: login-utils/shutdown.c:458
#, c-format
msgid "Executing the program \"%s\" ...\n"
msgstr "Spou¹tím program \"%s\" ...\n"
#: login-utils/shutdown.c:461
#, c-format
msgid "Error executing\t%s\n"
msgstr "Chyba pøi spu¹tìní\t%s\n"
#. gettext crashes on \a
#: login-utils/shutdown.c:488
#, c-format
msgid "URGENT: broadcast message from %s:"
msgstr "NALÉHAVÉ: zpráva pro v¹echny od %s:"
#: login-utils/shutdown.c:494
#, c-format
msgid "System going down in %d hours %d minutes"
msgstr "Systém bude vypnut za %dh %dmin"
#: login-utils/shutdown.c:497
#, c-format
msgid "System going down in 1 hour %d minutes"
msgstr "Systém bude vypnut za 1h %dmin"
#: login-utils/shutdown.c:500
#, c-format
msgid "System going down in %d minutes\n"
msgstr "Systém bude vypnut za %dmin\n"
#: login-utils/shutdown.c:503
msgid "System going down in 1 minute\n"
msgstr "Systém bude vypnut za 1min\n"
#: login-utils/shutdown.c:505
msgid "System going down IMMEDIATELY!\n"
msgstr "Systém bude OKAM®ITÌ vypnut!\n"
#: login-utils/shutdown.c:510
#, c-format
msgid "\t... %s ...\n"
msgstr "\t... %s ...\n"
#: login-utils/shutdown.c:567
msgid "Cannot fork for swapoff. Shrug!"
msgstr "Swapoff nelze spustit - volání fork selhalo."
#: login-utils/shutdown.c:575
msgid "Cannot exec swapoff, hoping umount will do the trick."
msgstr "Swapoff nelze spustit - volání exec selhalo. Snad pomù¾e umount."
#: login-utils/shutdown.c:594
msgid "Cannot fork for umount, trying manually."
msgstr "Umount nelze spustit - volání fork selhalo, zkou¹ím to ruènì."
#: login-utils/shutdown.c:603
#, c-format
msgid "Cannot exec %s, trying umount.\n"
msgstr "%s nelze spustit - volání exec selhalo, zkou¹ím umount.\n"
#: login-utils/shutdown.c:607
msgid "Cannot exec umount, giving up on umount."
msgstr ""
"Umount nelze spustit - volání exec selhalo, vzdávám snahu o spu¹tìní umount."
#: login-utils/shutdown.c:612
msgid "Unmounting any remaining filesystems..."
msgstr "Odpojuji v¹echny zbývající systémy souborù..."
#: login-utils/shutdown.c:659
#, c-format
msgid "shutdown: Couldn't umount %s: %s\n"
msgstr "shutdown: %s nelze odpojit: %s\n"
#: login-utils/simpleinit.c:130
msgid "Booting to single user mode.\n"
msgstr "Startuji do re¾imu pro jednoho u¾ivatele.\n"
#: login-utils/simpleinit.c:134
msgid "exec of single user shell failed\n"
msgstr ""
"Spu¹tìní shellu pro jednoho u¾ivatele se nezdaøilo - volání exec selhalo.\n"
#: login-utils/simpleinit.c:138
msgid "fork of single user shell failed\n"
msgstr ""
"Spu¹tìní shellu pro jednoho u¾ivatele se nezdaøilo - volání fork selhalo.\n"
#: login-utils/simpleinit.c:206
msgid "error opening fifo\n"
msgstr "Chyba pøi otevírání pojmenované roury\n"
#: login-utils/simpleinit.c:210
msgid "error setting close-on-exec on /dev/initctl"
msgstr ""
#: login-utils/simpleinit.c:257
msgid "error running finalprog\n"
msgstr "chyba pøi bìhu závìreèného programu\n"
#. Error
#: login-utils/simpleinit.c:261
msgid "error forking finalprog\n"
msgstr "volání fork pro závìreèný program selhalo\n"
#: login-utils/simpleinit.c:343
msgid ""
"\n"
"Wrong password.\n"
msgstr ""
"\n"
"Chybné heslo.\n"
#: login-utils/simpleinit.c:416
msgid "lstat of path failed\n"
msgstr "volání lstat pro cestu selhalo\n"
#: login-utils/simpleinit.c:424
msgid "stat of path failed\n"
msgstr "volání stat pro cestu selhalo\n"
#: login-utils/simpleinit.c:432
msgid "open of directory failed\n"
msgstr "adresáø nelze otevøít\n"
#: login-utils/simpleinit.c:506
msgid "fork failed\n"
msgstr "volání fork selhalo\n"
#: login-utils/simpleinit.c:537 text-utils/more.c:1622
msgid "exec failed\n"
msgstr "volání exec selhalo\n"
#: login-utils/simpleinit.c:561
msgid "cannot open inittab\n"
msgstr "inittab nelze otevøít\n"
#: login-utils/simpleinit.c:628
msgid "no TERM or cannot stat tty\n"
msgstr "¾ádný TERM nebo selhalo volání stat pro tty\n"
#: login-utils/simpleinit.c:934
#, c-format
msgid "error stopping service: \"%s\""
msgstr "chyba pøi ukonèování slu¾by: \"%s\""
#: login-utils/ttymsg.c:75
msgid "too many iov's (change code in wall/ttymsg.c)"
msgstr "pøíli¹ mnoho iov (zmìòte kód v wall/ttymsg.c)"
#: login-utils/ttymsg.c:85
msgid "excessively long line arg"
msgstr "pøíli¹ dlouhý øádek s argumenty"
#: login-utils/ttymsg.c:139
msgid "cannot fork"
msgstr "volání fork selhalo"
#: login-utils/ttymsg.c:143
#, c-format
msgid "fork: %s"
msgstr "fork: %s"
#: login-utils/ttymsg.c:171
#, c-format
msgid "%s: BAD ERROR"
msgstr "%s: ZÁVA®NÁ CHYBA"
#: login-utils/vipw.c:143
#, fuzzy, c-format
msgid "%s: the password file is busy.\n"
msgstr "%s: soubor %s je ji¾ pou¾íván.\n"
#: login-utils/vipw.c:146
#, fuzzy, c-format
msgid "%s: the group file is busy.\n"
msgstr "%s: soubor %s je ji¾ pou¾íván.\n"
#: login-utils/vipw.c:162
#, c-format
msgid "%s: the %s file is busy (%s present)\n"
msgstr "%s: %s soubor je ji¾ pou¾íván (nalezen %s)\n"
#: login-utils/vipw.c:168
#, c-format
msgid "%s: can't link %s: %s\n"
msgstr "%s: volání link pro %s selhalo: %s\n"
#: login-utils/vipw.c:202
#, fuzzy, c-format
msgid "%s: Can't get context for %s"
msgstr "Èasový limit pro %s nelze zjistit: %s\n"
#: login-utils/vipw.c:208
#, fuzzy, c-format
msgid "%s: Can't set context for %s"
msgstr "Èasový limit pro %s nelze zjistit: %s\n"
#: login-utils/vipw.c:217
#, c-format
msgid "%s: can't unlock %s: %s (your changes are still in %s)\n"
msgstr "%s: %s nelze odemknout: %s (Va¹e zmìny jsou stále v %s)\n"
#: login-utils/vipw.c:240
#, c-format
msgid "%s: Cannot fork\n"
msgstr "%s: volání fork selhalo\n"
#: login-utils/vipw.c:276
#, c-format
msgid "%s: %s unchanged\n"
msgstr "%s: %s nezmìnìno\n"
#: login-utils/vipw.c:297
#, c-format
msgid "%s: no changes made\n"
msgstr "%s: ¾ádné zmìny\n"
#: login-utils/vipw.c:352
msgid "You are using shadow groups on this system.\n"
msgstr "Tento systém pou¾ívá stínové skupiny.\n"
#: login-utils/vipw.c:353
msgid "You are using shadow passwords on this system.\n"
msgstr "Tento systém pou¾ívá stínová hesla.\n"
#: login-utils/vipw.c:354
#, c-format
msgid "Would you like to edit %s now [y/n]? "
msgstr "Chcete teï editovat soubor %s [y/n]?"
#: login-utils/wall.c:104
#, c-format
msgid "usage: %s [file]\n"
msgstr "Pou¾ití: %s [soubor]\n"
#: login-utils/wall.c:159
#, c-format
msgid "%s: can't open temporary file.\n"
msgstr "%s: doèasný soubor nelze otevøít.\n"
#: login-utils/wall.c:186
#, c-format
msgid "Broadcast Message from %s@%s"
msgstr "V¹eobecná zpráva od %s@%s"
#: login-utils/wall.c:204
#, c-format
msgid "%s: will not read %s - use stdin.\n"
msgstr "%s: nebudu èíst %s - pou¾ijte stdin.\n"
#: login-utils/wall.c:209
#, c-format
msgid "%s: can't read %s.\n"
msgstr "%s: %s nelze èíst.\n"
#: login-utils/wall.c:231
#, c-format
msgid "%s: can't stat temporary file.\n"
msgstr "%s: volání stat pro doèasný soubor selhalo.\n"
#: login-utils/wall.c:241
#, c-format
msgid "%s: can't read temporary file.\n"
msgstr "%s: doèasný soubor nelze èíst.\n"
#: misc-utils/cal.c:327
msgid "illegal month value: use 1-12"
msgstr "chybná hodnota pro mìsíc: pou¾ijte 1-12"
#: misc-utils/cal.c:331
msgid "illegal year value: use 1-9999"
msgstr "chybná hodnota pro rok: pou¾ijte 1-9999"
#.
#. * %s is the month name, %d the year number.
#. * you can change the order and/or add something here; eg for
#. * Basque the translation should be: "%2$dko %1$s", and
#. * the Vietnamese should be "%s na(m %d", etc.
#.
#: misc-utils/cal.c:439
#, c-format
msgid "%s %d"
msgstr ""
#: misc-utils/cal.c:780
#, fuzzy
msgid "usage: cal [-13smjyV] [[month] year]\n"
msgstr "Pou¾ití: cal [mjyV] [[mìsíc] rok]\n"
#: misc-utils/ddate.c:204
#, c-format
msgid "usage: %s [+format] [day month year]\n"
msgstr "Pou¾ití: %s [+formát] [den mìsíc rok]\n"
#. handle St. Tib's Day
#: misc-utils/ddate.c:251
msgid "St. Tib's Day"
msgstr "Den svatého Tiba"
#: misc-utils/kill.c:207
#, c-format
msgid "%s: unknown signal %s\n"
msgstr "%s: neznámý signál %s\n"
#: misc-utils/kill.c:270
#, c-format
msgid "%s: can't find process \"%s\"\n"
msgstr "%s: proces \"%s\" nelze nalézt\n"
#: misc-utils/kill.c:314
#, c-format
msgid "%s: unknown signal %s; valid signals:\n"
msgstr "%s: neznámý signál %s; platné signály:\n"
#: misc-utils/kill.c:354
#, c-format
msgid "usage: %s [ -s signal | -p ] [ -a ] pid ...\n"
msgstr "Pou¾ití: %s [ -s signál | -p ] [ -a ] pid ...\n"
#: misc-utils/kill.c:355
#, c-format
msgid " %s -l [ signal ]\n"
msgstr " %s -l [ signál ]\n"
#: misc-utils/logger.c:141
#, c-format
msgid "logger: %s: %s.\n"
msgstr "logger: %s: %s.\n"
# 'facility'? lépe asi jako zaøízení, zle to by se pletlo s 'device'
#: misc-utils/logger.c:248
#, c-format
msgid "logger: unknown facility name: %s.\n"
msgstr "logger: neznámé pøíslu¹enství: %s\n"
#: misc-utils/logger.c:260
#, c-format
msgid "logger: unknown priority name: %s.\n"
msgstr "logger: neznámý název priority: %s\n"
#: misc-utils/logger.c:287
msgid ""
"usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n"
msgstr ""
"Pou¾ití: logger [-is] [-f soubor] [-p pri] [-t znaèka] [-u soket] "
"[ zpráva ... ]\n"
#: misc-utils/look.c:349
msgid "usage: look [-dfa] [-t char] string [file]\n"
msgstr "Pou¾ití: look [-dfa] [-t znak] øetìzec [soubor]\n"
#: misc-utils/mcookie.c:122 misc-utils/mcookie.c:149
#, c-format
msgid "Could not open %s\n"
msgstr "%s nelze nalézt\n"
#: misc-utils/mcookie.c:126 misc-utils/mcookie.c:145
#, c-format
msgid "Got %d bytes from %s\n"
msgstr "%db z %s\n"
#: misc-utils/namei.c:103
#, c-format
msgid "namei: unable to get current directory - %s\n"
msgstr "namei: aktuální adresáø nelze zjistit - %s\n"
#: misc-utils/namei.c:116
#, c-format
msgid "namei: unable to chdir to %s - %s (%d)\n"
msgstr "namei: do adresáøe %s nelze pøejít - %s (%d)\n"
#: misc-utils/namei.c:126
msgid "usage: namei [-mx] pathname [pathname ...]\n"
msgstr "Pou¾ití: namei [mx] název cesty [název cesty ...]\n"
#: misc-utils/namei.c:151
msgid "namei: could not chdir to root!\n"
msgstr "namei: do adresáøe root nelze pøejít!\n"
#: misc-utils/namei.c:158
msgid "namei: could not stat root!\n"
msgstr "namei: volání stat pro adresáø root selhalo!\n"
#: misc-utils/namei.c:172
#, fuzzy
msgid "namei: buf overflow\n"
msgstr " Pøeteèení\n"
#: misc-utils/namei.c:218
#, c-format
msgid " ? could not chdir into %s - %s (%d)\n"
msgstr " ? do adresáøe %s nelze pøejít - %s (%d)\n"
#: misc-utils/namei.c:247
#, c-format
msgid " ? problems reading symlink %s - %s (%d)\n"
msgstr " ? problémy pøi ètení symbolického odkazu %s - %s (%d)\n"
#: misc-utils/namei.c:257
msgid " *** EXCEEDED UNIX LIMIT OF SYMLINKS ***\n"
msgstr " *** PØEKROÈEN UNIXOVÝ LIMIT PRO SYMBOLICKÉ ODKAZY ***\n"
#: misc-utils/namei.c:294
#, c-format
msgid "namei: unknown file type 0%06o on file %s\n"
msgstr "namei: typ 0%06o souboru %s je neznámý\n"
#: misc-utils/rename.c:38
#, c-format
msgid "%s: out of memory\n"
msgstr "%s: nedostatek pamìti\n"
#: misc-utils/rename.c:56
#, c-format
msgid "%s: renaming %s to %s failed: %s\n"
msgstr "%s: %s nelze pøejmenovat na %s: %s\n"
#: misc-utils/rename.c:86
#, c-format
msgid "call: %s from to files...\n"
msgstr "Pou¾ití: %s z na soubory...\n"
#: misc-utils/script.c:107
#, fuzzy, c-format
msgid ""
"Warning: `%s' is a link.\n"
"Use `%s [options] %s' if you really want to use it.\n"
"Script not started.\n"
msgstr ""
"Varování: `%s' není symbolickým odkazem.\n"
"Pokud jej opravdu chcete pou¾ít, tak zadejte `%s [pøepínaèe] %s'.\n"
"Script nebyl spu¹tìn.\n"
#: misc-utils/script.c:169
#, fuzzy
msgid "usage: script [-a] [-f] [-q] [-t] [file]\n"
msgstr "Pou¾ití: script [-a] [-f] [-q] [soubor]\n"
#: misc-utils/script.c:192
#, c-format
msgid "Script started, file is %s\n"
msgstr "Script spu¹tìn. Soubor je %s.\n"
#: misc-utils/script.c:278
#, c-format
msgid "Script started on %s"
msgstr "Script spu¹tìn %s"
#: misc-utils/script.c:362
#, c-format
msgid ""
"\n"
"Script done on %s"
msgstr ""
"\n"
"Script ukonèen %s"
#: misc-utils/script.c:369
#, c-format
msgid "Script done, file is %s\n"
msgstr "Script utils. Soubor je %s\n"
#: misc-utils/script.c:380
msgid "openpty failed\n"
msgstr "volání openpty selhalo\n"
#: misc-utils/script.c:414
msgid "Out of pty's\n"
msgstr "Nejsou ¾ádná dal¹í volná pty\n"
#. Print error message about arguments, and the command's syntax.
#: misc-utils/setterm.c:744
#, c-format
msgid "%s: Argument error, usage\n"
msgstr "%s: Chybný pøepínaè, pou¾ití\n"
#: misc-utils/setterm.c:747
msgid " [ -term terminal_name ]\n"
msgstr " [ -term název terminálu]\n"
#: misc-utils/setterm.c:748
msgid " [ -reset ]\n"
msgstr " [ -reset ]\n"
#: misc-utils/setterm.c:749
msgid " [ -initialize ]\n"
msgstr " [ -initialize ]\n"
#: misc-utils/setterm.c:750
msgid " [ -cursor [on|off] ]\n"
msgstr " [ -cursor [on|off] ]\n"
#: misc-utils/setterm.c:752
msgid " [ -snow [on|off] ]\n"
msgstr " [ -snow [on|off] ]\n"
#: misc-utils/setterm.c:753
msgid " [ -softscroll [on|off] ]\n"
msgstr " [ -softscroll [on|off] ]\n"
#: misc-utils/setterm.c:755
msgid " [ -repeat [on|off] ]\n"
msgstr " [ -repeat [on|off] ]\n"
#: misc-utils/setterm.c:756
msgid " [ -appcursorkeys [on|off] ]\n"
msgstr " [ -appcursorkeys [on|off] ]\n"
#: misc-utils/setterm.c:757
msgid " [ -linewrap [on|off] ]\n"
msgstr " [ -linewrap [on|off] ]\n"
#: misc-utils/setterm.c:758
msgid " [ -default ]\n"
msgstr " [ -default ]\n"
#: misc-utils/setterm.c:759
msgid " [ -foreground black|blue|green|cyan"
msgstr " [ -foreground black|blue|green|cyan"
#: misc-utils/setterm.c:760 misc-utils/setterm.c:762
msgid "|red|magenta|yellow|white|default ]\n"
msgstr "|red|magenta|yellow|white|default ]\n"
#: misc-utils/setterm.c:761
msgid " [ -background black|blue|green|cyan"
msgstr " [ -background black|blue|green|cyan"
#: misc-utils/setterm.c:763
msgid " [ -ulcolor black|grey|blue|green|cyan"
msgstr " [ -ulcolor black|grey|blue|green|cyan"
#: misc-utils/setterm.c:764 misc-utils/setterm.c:766 misc-utils/setterm.c:768
#: misc-utils/setterm.c:770
msgid "|red|magenta|yellow|white ]\n"
msgstr "|red|magenta|yellow|white ]\n"
#: misc-utils/setterm.c:765
msgid " [ -ulcolor bright blue|green|cyan"
msgstr " [ -ulcolor bright blue|green|cyan"
#: misc-utils/setterm.c:767
msgid " [ -hbcolor black|grey|blue|green|cyan"
msgstr " [ -hbcolor black|grey|blue|green|cyan"
#: misc-utils/setterm.c:769
msgid " [ -hbcolor bright blue|green|cyan"
msgstr " [ -hbcolor bright blue|green|cyan"
#: misc-utils/setterm.c:772
msgid " [ -standout [ attr ] ]\n"
msgstr " [ -standout [ atribut ] ]\n"
#: misc-utils/setterm.c:774
msgid " [ -inversescreen [on|off] ]\n"
msgstr " [ -inversescreen [on|off] ]\n"
#: misc-utils/setterm.c:775
msgid " [ -bold [on|off] ]\n"
msgstr " [ -bold [on|off] ]\n"
#: misc-utils/setterm.c:776
msgid " [ -half-bright [on|off] ]\n"
msgstr " [ -half-bright [on|off] ]\n"
#: misc-utils/setterm.c:777
msgid " [ -blink [on|off] ]\n"
msgstr " [ -blink [on|off] ]\n"
#: misc-utils/setterm.c:778
msgid " [ -reverse [on|off] ]\n"
msgstr " [ -reverse [on|off] ]\n"
#: misc-utils/setterm.c:779
msgid " [ -underline [on|off] ]\n"
msgstr " [ -underline [on|off] ]\n"
#: misc-utils/setterm.c:780
msgid " [ -store ]\n"
msgstr " [ -store ]\n"
#: misc-utils/setterm.c:781
msgid " [ -clear [all|rest] ]\n"
msgstr " [ -clear [all|rest] ]\n"
#: misc-utils/setterm.c:782
msgid " [ -tabs [ tab1 tab2 tab3 ... ] ] (tabn = 1-160)\n"
msgstr " [ -tabs [ tab1 tab2 tab3 ... ] ] (tabn = 1-160)\n"
#: misc-utils/setterm.c:783
msgid " [ -clrtabs [ tab1 tab2 tab3 ... ] ] (tabn = 1-160)\n"
msgstr " [ -clrtabs [ tab1 tab2 tab3 ... ] ] (tabn = 1-160)\n"
#: misc-utils/setterm.c:784
msgid " [ -regtabs [1-160] ]\n"
msgstr " [ -regtabs [1-160] ]\n"
#: misc-utils/setterm.c:785
msgid " [ -blank [0-60] ]\n"
msgstr " [ -blank [0-60] ]\n"
#: misc-utils/setterm.c:786
msgid " [ -dump [1-NR_CONSOLES] ]\n"
msgstr " [ -dump [1-NR_CONSOLES] ]\n"
#: misc-utils/setterm.c:787
msgid " [ -append [1-NR_CONSOLES] ]\n"
msgstr " [ -append [1-NR_CONSOLES] ]\n"
#: misc-utils/setterm.c:788
msgid " [ -file dumpfilename ]\n"
msgstr " [ -file soubor pro ulo¾ení ]\n"
#: misc-utils/setterm.c:789
msgid " [ -msg [on|off] ]\n"
msgstr " [ -msg [on|off] ]\n"
#: misc-utils/setterm.c:790
msgid " [ -msglevel [0-8] ]\n"
msgstr " [ -msglevel [0-8] ]\n"
#: misc-utils/setterm.c:791
msgid " [ -powersave [on|vsync|hsync|powerdown|off] ]\n"
msgstr " [ -powersave [on|vsync|hsync|powerdown|off] ]\n"
#: misc-utils/setterm.c:792
msgid " [ -powerdown [0-60] ]\n"
msgstr " [ -powerdown [0-60] ]\n"
#: misc-utils/setterm.c:793
msgid " [ -blength [0-2000] ]\n"
msgstr " [ -blength [0-2000] ]\n"
#: misc-utils/setterm.c:794
msgid " [ -bfreq freqnumber ]\n"
msgstr " [ -bfreq frekvence ]\n"
#: misc-utils/setterm.c:1049
msgid "cannot (un)set powersave mode\n"
msgstr "¹etøící re¾im nelze vypnout/zapnout\n"
#: misc-utils/setterm.c:1088 misc-utils/setterm.c:1096
#, c-format
msgid "klogctl error: %s\n"
msgstr "chyba klogctl: %s\n"
#: misc-utils/setterm.c:1149
#, c-format
msgid "Error reading %s\n"
msgstr "Chyba pøi ètení %s\n"
#: misc-utils/setterm.c:1164
msgid "Error writing screendump\n"
msgstr "Chyba pøi ukládání obrazu obrazovky\n"
#: misc-utils/setterm.c:1178
#, c-format
msgid "couldn't read %s, and cannot ioctl dump\n"
msgstr "nelze èíst %s a nelze provést dump pomocí volání ioctl\n"
#: misc-utils/setterm.c:1244
#, c-format
msgid "%s: $TERM is not defined.\n"
msgstr "%s: promìnná TERM není nastavena.\n"
#: misc-utils/whereis.c:157
msgid "whereis [ -sbmu ] [ -SBM dir ... -f ] name...\n"
msgstr "whereis [ -sbmu ] [ -SBM adresáø ... -f ] název...\n"
#: misc-utils/write.c:99
msgid "write: can't find your tty's name\n"
msgstr "write: název Va¹eho tty nelze zjistit\n"
#: misc-utils/write.c:110
msgid "write: you have write permission turned off.\n"
msgstr "write: máte vypnut pøíjem zpráv.\n"
#: misc-utils/write.c:131
#, c-format
msgid "write: %s is not logged in on %s.\n"
msgstr "write: u¾ivatel %s není na %s pøihlá¹en.\n"
#: misc-utils/write.c:139
#, c-format
msgid "write: %s has messages disabled on %s\n"
msgstr "write: u¾ivatel %s má na %s vypnut pøíjem zpráv\n"
#: misc-utils/write.c:146
msgid "usage: write user [tty]\n"
msgstr "Pou¾ití: write u¾ivatel [tty]\n"
#: misc-utils/write.c:234
#, c-format
msgid "write: %s is not logged in\n"
msgstr "write: u¾ivatel %s není pøihlá¹en\n"
#: misc-utils/write.c:243
#, c-format
msgid "write: %s has messages disabled\n"
msgstr "write: u¾ivatel %s má vypnut pøíjem zpráv\n"
#: misc-utils/write.c:247
#, c-format
msgid "write: %s is logged in more than once; writing to %s\n"
msgstr "writing: u¾ivatel %s je pøihlá¹en vícekrát; pí¹i na %s\n"
#: misc-utils/write.c:313
#, c-format
msgid "Message from %s@%s (as %s) on %s at %s ..."
msgstr "Zpráva od %s@%s (jako %s) na %s v %s ..."
#: misc-utils/write.c:316
#, c-format
msgid "Message from %s@%s on %s at %s ..."
msgstr "Zpráva od %s@%s na %s v %s ..."
#: mount/fstab.c:135
#, c-format
msgid "warning: error reading %s: %s"
msgstr "varování: chyba pøi ètení %s: %s"
#: mount/fstab.c:163 mount/fstab.c:188
#, c-format
msgid "warning: can't open %s: %s"
msgstr "varování: %s nelze otevøít: %s"
#: mount/fstab.c:168
#, c-format
msgid "mount: could not open %s - using %s instead\n"
msgstr "mount: %s nelze otevøít - pou¾ívám %s\n"
#. linktargetfile does not exist (as a file)
#. and we cannot create it. Read-only filesystem?
#. Too many files open in the system?
#. Filesystem full?
#: mount/fstab.c:472
#, c-format
msgid "can't create lock file %s: %s (use -n flag to override)"
msgstr ""
"zamykací soubor %s nelze vytvoøit: %s\n"
"(pou¾ijte pøepínaè -n pro vynechání zápisu do mtab)"
#: mount/fstab.c:487
#, c-format
msgid "can't link lock file %s: %s (use -n flag to override)"
msgstr ""
"volání link pro zamykací soubor %s selhalo: %s\n"
"(pou¾ijte pøepínaè -n pro vynechání zápisu do mtab)"
#: mount/fstab.c:499
#, c-format
msgid "can't open lock file %s: %s (use -n flag to override)"
msgstr ""
"zamykací soubor %s nelze otevøít: %s\n"
"(pou¾ijte pøepínaè -n pro vynechání zápisu do mtab)"
#: mount/fstab.c:514
#, c-format
msgid "Can't lock lock file %s: %s\n"
msgstr "Zamykací soubor %s nelze zamknout: %s\n"
#: mount/fstab.c:526
#, c-format
msgid "can't lock lock file %s: %s"
msgstr "Zamykací soubor %s nelze zamknout: %s"
#: mount/fstab.c:528
msgid "timed out"
msgstr "vypr¹el èas"
#: mount/fstab.c:535
#, c-format
msgid ""
"Cannot create link %s\n"
"Perhaps there is a stale lock file?\n"
msgstr ""
"Odkaz %s nelze vytvoøit.\n"
"Není nìkde zastaralý zamykací soubor?\n"
#: mount/fstab.c:584 mount/fstab.c:622
#, c-format
msgid "cannot open %s (%s) - mtab not updated"
msgstr "nelze otevøít %s (%s) - mtab nebyl aktualizován"
#: mount/fstab.c:630
#, c-format
msgid "error writing %s: %s"
msgstr "chyba pøi zápisu %s: %s"
#: mount/fstab.c:640
#, c-format
msgid "error changing mode of %s: %s\n"
msgstr "chyba pøi zmìnì módu %s: %s\n"
#: mount/fstab.c:658
#, c-format
msgid "can't rename %s to %s: %s\n"
msgstr "%s nelze pøejmenovat na %s: %s\n"
#: mount/lomount.c:73
#, c-format
msgid "loop: can't open device %s: %s\n"
msgstr "loop: zaøízení %s nelze otevøít: %s\n"
#: mount/lomount.c:89
#, c-format
msgid ", offset %lld"
msgstr ""
#: mount/lomount.c:92
#, c-format
msgid ", sizelimit %lld"
msgstr ""
#: mount/lomount.c:100
#, c-format
msgid ", encryption %s (type %d)"
msgstr ""
#: mount/lomount.c:114
#, c-format
msgid ", offset %d"
msgstr ""
#: mount/lomount.c:117
#, fuzzy, c-format
msgid ", encryption type %d\n"
msgstr "Nepodporovaný ¹ifrovací typ %s\n"
#: mount/lomount.c:126
#, c-format
msgid "loop: can't get info on device %s: %s\n"
msgstr "loop: informace o zaøízení %s nelze získat: %s\n"
#: mount/lomount.c:177
#, fuzzy, c-format
msgid "%s: could not find any device /dev/loop#"
msgstr "mount: ¾ádné zaøízení /dev/loop# nelze nalézt"
#: mount/lomount.c:180
#, fuzzy, c-format
msgid ""
"%s: Could not find any loop device. Maybe this kernel does not know\n"
" about the loop device? (If so, recompile or `modprobe loop'.)"
msgstr ""
"mount: ®ádné loop zaøízení nelze nalézt a dle %s toto jádro\n"
" nezná loop zaøízení. Pokud je tomu tak, pak jej znovu pøelo¾te,\n"
" èi zkuste `insmod loop.o'."
#: mount/lomount.c:185
#, fuzzy, c-format
msgid "%s: could not find any free loop device"
msgstr "mount: ¾ádné volné loop zaøízení nelze najít"
#: mount/lomount.c:283
msgid "Couldn't lock into memory, exiting.\n"
msgstr "Nelze zamknout v pamìti. Konèím.\n"
#: mount/lomount.c:337
#, fuzzy, c-format
msgid "set_loop(%s,%s,%llu): success\n"
msgstr "set_loop(%s,%s,%d): úspìch\n"
#: mount/lomount.c:348
#, c-format
msgid "loop: can't delete device %s: %s\n"
msgstr "loop: zaøízení %s nelze smazat: %s\n"
#: mount/lomount.c:358
#, c-format
msgid "del_loop(%s): success\n"
msgstr "del_loop(%s): úspìch\n"
#: mount/lomount.c:366
msgid "This mount was compiled without loop support. Please recompile.\n"
msgstr "Tento program byl pøelo¾en bez podpory pro loop. Pøelo¾te jej znovu.\n"
#: mount/lomount.c:403
#, fuzzy, c-format
msgid ""
"usage:\n"
" %s loop_device # give info\n"
" %s -d loop_device # delete\n"
" %s -f # find unused\n"
" %s [-e encryption] [-o offset] {-f|loop_device} file # setup\n"
msgstr ""
"Pou¾ití:\n"
" %s loop zaøízení # vypí¹e informace\n"
" %s -d loop zaøízení # sma¾e\n"
" %s [ -e ¹ifra ] [ -o posun ] loop zaøízení soubor # nastaví\n"
#: mount/lomount.c:422 mount/sundries.c:30 mount/sundries.c:45
#: mount/sundries.c:248
msgid "not enough memory"
msgstr "Nedostatek pamìti"
#: mount/lomount.c:537
msgid "No loop support was available at compile time. Please recompile.\n"
msgstr "Podpora pro loop nebyla pøi pøekladu zadána. Pøelo¾te program znovu.\n"
#: mount/mntent.c:166
#, c-format
msgid "[mntent]: warning: no final newline at the end of %s\n"
msgstr "[mntent]: varování: %s není ukonèeno novou øádkou\n"
#: mount/mntent.c:217
#, c-format
msgid "[mntent]: line %d in %s is bad%s\n"
msgstr "[mntent]: øádek %d v %s je chybný%s\n"
#: mount/mntent.c:220
msgid "; rest of file ignored"
msgstr "; ignoruji zbytek souboru"
#: mount/mount.c:375
#, c-format
msgid "mount: according to mtab, %s is already mounted on %s"
msgstr "mount: podle mtab je %s ji¾ pøipojeno na %s"
#: mount/mount.c:380
#, c-format
msgid "mount: according to mtab, %s is mounted on %s"
msgstr "mount: podle mtab je %s pøipojeno na %s"
#: mount/mount.c:400
#, c-format
msgid "mount: can't open %s for writing: %s"
msgstr "mount: %s nelze otevøít pro zápis: %s"
#: mount/mount.c:417 mount/mount.c:670
#, c-format
msgid "mount: error writing %s: %s"
msgstr "mount: chyba pøi zápisu %s: %s"
#: mount/mount.c:425
#, c-format
msgid "mount: error changing mode of %s: %s"
msgstr "mount: chyba pøi zmìnì módu %s: %s"
#: mount/mount.c:476
#, c-format
msgid "%s looks like swapspace - not mounted"
msgstr "%s vypadá jako odkládací prostor - nepøipojeno"
#: mount/mount.c:563
msgid "mount failed"
msgstr "pøipojení se nezdaøilo"
#: mount/mount.c:565
#, c-format
msgid "mount: only root can mount %s on %s"
msgstr "mount: pouze superu¾ivatel mù¾e pøipojit %s na %s"
#: mount/mount.c:593
msgid "mount: loop device specified twice"
msgstr "mount: zaøízení loop bylo zadáno dvakrát"
#: mount/mount.c:598
msgid "mount: type specified twice"
msgstr "mount: typ byl zadán dvakrát"
#: mount/mount.c:610
msgid "mount: skipping the setup of a loop device\n"
msgstr "mount: pøeskakuji nastavení loop zaøízení\n"
#: mount/mount.c:619
#, c-format
msgid "mount: going to use the loop device %s\n"
msgstr "mount: chystám se pou¾ít zaøízení loop %s\n"
#: mount/mount.c:624
msgid "mount: failed setting up loop device\n"
msgstr "mount: nepodaøilo se nastavit zaøízení loop\n"
#: mount/mount.c:628
msgid "mount: setup loop device successfully\n"
msgstr "mount: zaøízení loop bylo korektnì nastaveno\n"
#: mount/mount.c:665
#, c-format
msgid "mount: can't open %s: %s"
msgstr "mount: %s nelze otevøít: %s"
#: mount/mount.c:686
msgid "mount: argument to -p or --pass-fd must be a number"
msgstr ""
#: mount/mount.c:699
#, fuzzy, c-format
msgid "mount: cannot open %s for setting speed"
msgstr "mount: %s nelze pro nastavení rychlosti otevøít"
#: mount/mount.c:702
#, c-format
msgid "mount: cannot set speed: %s"
msgstr "mount: rychlost nelze nastavit: %s"
#: mount/mount.c:756 mount/mount.c:1336
#, c-format
msgid "mount: cannot fork: %s"
msgstr "mount: volání fork selhalo: %s"
#: mount/mount.c:844
msgid "mount: this version was compiled without support for the type `nfs'"
msgstr "mount: tato verze byla pøelo¾ena bez podpory pro typ `nfs'"
#: mount/mount.c:884
msgid "mount: failed with nfs mount version 4, trying 3..\n"
msgstr "mount: chyba s nfs mount verze 4, zkou¹ím verzi 3..\n"
#: mount/mount.c:895
msgid ""
"mount: I could not determine the filesystem type, and none was specified"
msgstr "mount: typ systému souborù nebyl zadán a ani jej nelze zjistit"
#: mount/mount.c:898
msgid "mount: you must specify the filesystem type"
msgstr "mount: musíte zadat typ systému souborù"
#. should not happen
#: mount/mount.c:901
msgid "mount: mount failed"
msgstr "mount: pøipojení se nezdaøilo"
#: mount/mount.c:907 mount/mount.c:942
#, c-format
msgid "mount: mount point %s is not a directory"
msgstr "mount: pøípojný bod %s není adresáøem"
#: mount/mount.c:909
msgid "mount: permission denied"
msgstr "mount: pøístup odmítnut"
#: mount/mount.c:911
msgid "mount: must be superuser to use mount"
msgstr "mount: mount mù¾e pou¾ívat pouze superu¾ivatel"
#. heuristic: if /proc/version exists, then probably proc is mounted
#. proc mounted?
#: mount/mount.c:915 mount/mount.c:919
#, c-format
msgid "mount: %s is busy"
msgstr "mount: %s je ji¾ pøipojeno"
#. no
#. yes, don't mention it
#: mount/mount.c:921
msgid "mount: proc already mounted"
msgstr "mount: proc je ji¾ pøipojeno"
#: mount/mount.c:923
#, c-format
msgid "mount: %s already mounted or %s busy"
msgstr "mount: %s je ji¾ pøipojeno, èi je %s ji¾ pou¾íváno"
#: mount/mount.c:929
#, c-format
msgid "mount: mount point %s does not exist"
msgstr "mount: pøípojný bod %s neexistuje"
#: mount/mount.c:931
#, c-format
msgid "mount: mount point %s is a symbolic link to nowhere"
msgstr "mount: pøípojný bod %s je symbolickým odkazem, jen¾ nikam neukazuje"
#: mount/mount.c:934
#, c-format
msgid "mount: special device %s does not exist"
msgstr "mount: speciální zaøízení %s neexistuje"
#: mount/mount.c:944
#, c-format
msgid ""
"mount: special device %s does not exist\n"
" (a path prefix is not a directory)\n"
msgstr ""
"mount: speciální zaøízení %s neexistuje\n"
" (název cesty nezaèíná adresáøem)\n"
#: mount/mount.c:957
#, c-format
msgid "mount: %s not mounted already, or bad option"
msgstr "mount: %s je¹tì není pøipojeno èi chybný pøepínaè"
#: mount/mount.c:959
#, fuzzy, c-format
msgid ""
"mount: wrong fs type, bad option, bad superblock on %s,\n"
" missing codepage, or too many mounted file systems"
msgstr ""
"mount: chybný typ ss, chybný pøepínaè, chybný superblok na %s\n"
" nebo pøíli¹ mnoho pøipojených systémù souborù"
#: mount/mount.c:993
msgid "mount table full"
msgstr "tabulka pøipojení je plná"
#: mount/mount.c:995
#, c-format
msgid "mount: %s: can't read superblock"
msgstr "mount: %s: superblok nelze pøeèíst"
#: mount/mount.c:999
#, c-format
msgid "mount: %s: unknown device"
msgstr "umount: blokové zaøízení %s je neznámé"
#: mount/mount.c:1004
#, fuzzy, c-format
msgid "mount: unknown filesystem type '%s'"
msgstr " l vypsat známé typy systémù souborù"
#: mount/mount.c:1016
#, c-format
msgid "mount: probably you meant %s"
msgstr "mount: pravdìpodobnì jste myslel %s"
#: mount/mount.c:1018
#, fuzzy
msgid "mount: maybe you meant 'iso9660'?"
msgstr "mount: mo¾ná jste myslel iso9660 ?"
#: mount/mount.c:1020
#, fuzzy
msgid "mount: maybe you meant 'vfat'?"
msgstr "mount: mo¾ná jste myslel iso9660 ?"
#: mount/mount.c:1023
#, c-format
msgid "mount: %s has wrong device number or fs type %s not supported"
msgstr "mount: %s má chybné èíslo zaøízení, èi ss typ %s není podporován"
#. strange ...
#: mount/mount.c:1029
#, c-format
msgid "mount: %s is not a block device, and stat fails?"
msgstr "mount: %s není blokovým zaøízením a volání stat selhalo?"
#: mount/mount.c:1031
#, c-format
msgid ""
"mount: the kernel does not recognize %s as a block device\n"
" (maybe `insmod driver'?)"
msgstr ""
"mount: jádro nerozpoznalo %s jako blokové zaøízení (mo¾ná `insmod ovladaè'?)"
#: mount/mount.c:1034
#, c-format
msgid "mount: %s is not a block device (maybe try `-o loop'?)"
msgstr "mount: %s není blokovým zaøízením (mo¾ná pomù¾e `-o loop'?)"
#: mount/mount.c:1037
#, c-format
msgid "mount: %s is not a block device"
msgstr "mount: %s není blokovým zaøízením"
#: mount/mount.c:1040
#, c-format
msgid "mount: %s is not a valid block device"
msgstr "mount: %s není platným blokovým zaøízením"
#. pre-linux 1.1.38, 1.1.41 and later
#. linux 1.1.38 and later
#: mount/mount.c:1043
msgid "block device "
msgstr "blokové zaøízení"
#: mount/mount.c:1045
#, c-format
msgid "mount: cannot mount %s%s read-only"
msgstr "umount: %s%s nelze pøipojit v re¾imu pouze pro ètení"
#: mount/mount.c:1049
#, c-format
msgid "mount: %s%s is write-protected but explicit `-w' flag given"
msgstr "mount: %s%s je chránìno proti zápisu, pøipojuji pouze pro ètení"
#: mount/mount.c:1066
#, c-format
msgid "mount: %s%s is write-protected, mounting read-only"
msgstr "mount: %s%s je chránìno proti zápisu, pøipojuji pouze pro ètení"
#: mount/mount.c:1165
msgid "mount: no type was given - I'll assume nfs because of the colon\n"
msgstr "mount: nebyl zadán typ - budu pou¾ívat nfs kvùli dvojteèce\n"
#: mount/mount.c:1171
#, fuzzy
msgid "mount: no type was given - I'll assume smbfs because of the // prefix\n"
msgstr "mount: nebyl zadán typ - budu pou¾ívat smbfs kvùli dvojteèce\n"
#.
#. * Retry in the background.
#.
#: mount/mount.c:1188
#, c-format
msgid "mount: backgrounding \"%s\"\n"
msgstr "mount: pracuji na pozadí \"%s\"\n"
#: mount/mount.c:1199
#, c-format
msgid "mount: giving up \"%s\"\n"
msgstr "mount: konèím \"%s\"\n"
#: mount/mount.c:1281
#, c-format
msgid "mount: %s already mounted on %s\n"
msgstr "mount: %s je ji¾ pøipojeno na %s\n"
#: mount/mount.c:1414
#, fuzzy
msgid ""
"Usage: mount -V : print version\n"
" mount -h : print this help\n"
" mount : list mounted filesystems\n"
" mount -l : idem, including volume labels\n"
"So far the informational part. Next the mounting.\n"
"The command is `mount [-t fstype] something somewhere'.\n"
"Details found in /etc/fstab may be omitted.\n"
" mount -a [-t|-O] ... : mount all stuff from /etc/fstab\n"
" mount device : mount device at the known place\n"
" mount directory : mount known device here\n"
" mount -t type dev dir : ordinary mount command\n"
"Note that one does not really mount a device, one mounts\n"
"a filesystem (of the given type) found on the device.\n"
"One can also mount an already visible directory tree elsewhere:\n"
" mount --bind olddir newdir\n"
"or move a subtree:\n"
" mount --move olddir newdir\n"
"A device can be given by name, say /dev/hda1 or /dev/cdrom,\n"
"or by label, using -L label or by uuid, using -U uuid .\n"
"Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n"
"For many more details, say man 8 mount .\n"
msgstr ""
"Pou¾ití: mount -V : vypí¹e informace o verzi\n"
" mount -h : vypí¹e tuto nápovìdu\n"
" mount : zobrazí seznam pøipojených systémù "
"souborù\n"
" mount -l : toté¾ plus popisky svazkù\n"
"Toto byly pøepínaèe slou¾ící k získání informací. Nyní k pøepínaèùm "
"slou¾ícím\n"
"k pøipojování systémù souborù.\n"
"Syntaxe je`mount [-t sstyp] nìco nìkam'.\n"
"Údaje obsa¾ené v /etc/fstab mohou být vynechány.\n"
" mount -a : pøipojí ve¹keré polo¾ky z /etc/fstab\n"
" mount zaøízení : pøipojí zaøízení na známé místo\n"
" mount adresáø : pøipojí známé zaøízení k adresáøi\n"
" mount -t typ zaø adr : bì¾ný pøíkaz pro pøipojení\n"
"Uvìdomte si, ¾e tím, co se pøipojuje, ve skuteènosti není zaøízení, ale "
"systém\n"
"souborù (daného typu), který se na tomto zaøízení nachází.\n"
"Mù¾ete také pøipojit ji¾ pøístupný adresáøový strom na jiné místo:\n"
" mount --bind starý_adresáø nový_adrersáø\n"
"Zaøízení mù¾e být udáno jménem (napø. /dev/hda1 èi /dev/cdrom), popiskou\n"
"(pomocí pepínaèe -L popiska) nebo uuid (pomocí pøepínaèe -U uuid).\n"
"Dal¹í pøepínaèe: [-nfFrsvw] [-o volby].\n"
"Dal¹í informace viz man(8).\n"
#: mount/mount.c:1603
msgid "mount: only root can do that"
msgstr "mount: toto mù¾e provést pouze superu¾ivatel"
#: mount/mount.c:1608
#, c-format
msgid "mount: no %s found - creating it..\n"
msgstr "mount: %s nebylo nalezeno - vytváøím jej..\n"
#: mount/mount.c:1620
msgid "mount: no such partition found"
msgstr "mount: ¾ádný odpovídající diskový oddíl nebyl nalezen"
#: mount/mount.c:1622
#, c-format
msgid "mount: mounting %s\n"
msgstr "mount: pøipojuji %s\n"
#: mount/mount.c:1631
msgid "nothing was mounted"
msgstr "nebyl pøipojen ¾ádný diskový oddíl"
#: mount/mount.c:1646
#, c-format
msgid "mount: cannot find %s in %s"
msgstr "mount: %s nelze v %s nalézt"
#: mount/mount.c:1661
#, c-format
msgid "mount: can't find %s in %s or %s"
msgstr "mount: %s nelze nalézt v %s ani %s"
#: mount/mount_by_label.c:190
#, c-format
msgid ""
"mount: could not open %s, so UUID and LABEL conversion cannot be done.\n"
msgstr ""
"mount: %s nelze otevøít,tak¾e konverze UUID a LABEL nebude provedena.\n"
#: mount/mount_by_label.c:310
msgid "mount: bad UUID"
msgstr "mount: chybné UUID"
#: mount/mount_guess_fstype.c:489
#, fuzzy
msgid "mount: error while guessing filesystem type\n"
msgstr "mount: musíte zadat typ systému souborù"
#: mount/mount_guess_fstype.c:541
#, c-format
msgid "mount: you didn't specify a filesystem type for %s\n"
msgstr "mount: nezadal jste typ systému souborù pro %s\n"
#: mount/mount_guess_fstype.c:544
#, c-format
msgid " I will try all types mentioned in %s or %s\n"
msgstr " Vyzkou¹ím v¹echny typy v %s èi %s\n"
#: mount/mount_guess_fstype.c:547
msgid " and it looks like this is swapspace\n"
msgstr " a vypadá to, ¾e se jedná o odkládací prostor\n"
#: mount/mount_guess_fstype.c:549
#, c-format
msgid " I will try type %s\n"
msgstr " Vyzkou¹ím typ %s\n"
#: mount/mount_guess_fstype.c:637
#, c-format
msgid "Trying %s\n"
msgstr "Pou¾ívám %s.\n"
#: mount/nfsmount.c:237
msgid "mount: excessively long host:dir argument\n"
msgstr "mount: pøíli¹ dlouhý argument pro poèítaè:adresáø\n"
#: mount/nfsmount.c:251
msgid "mount: warning: multiple hostnames not supported\n"
msgstr "mount: varování: vícenásobné názvy poèítaèù nejsou podporovány\n"
#: mount/nfsmount.c:256
msgid "mount: directory to mount not in host:dir format\n"
msgstr "mount: adresáø pro pøipojení není ve tvaru poèítaè:adresáø\n"
#: mount/nfsmount.c:267 mount/nfsmount.c:522
#, c-format
msgid "mount: can't get address for %s\n"
msgstr "mount: adresu %s nelze zjistit\n"
#: mount/nfsmount.c:273
msgid "mount: got bad hp->h_length\n"
msgstr "mount: ¹patné hp->h_length\n"
#: mount/nfsmount.c:290
msgid "mount: excessively long option argument\n"
msgstr "mount: pøíli¹ dlouhý argument pro volbu\n"
#: mount/nfsmount.c:382
msgid "Warning: Unrecognized proto= option.\n"
msgstr "Varování: neznámá volba pro proto=.\n"
#: mount/nfsmount.c:389
msgid "Warning: Option namlen is not supported.\n"
msgstr "Varování: volba namlen není podporována.\n"
#: mount/nfsmount.c:393
#, c-format
msgid "unknown nfs mount parameter: %s=%d\n"
msgstr "parametr %s=%d pro pøipojení nfs není znám\n"
#: mount/nfsmount.c:427
msgid "Warning: option nolock is not supported.\n"
msgstr "Varování: volba nolock není podporována.\n"
#: mount/nfsmount.c:432
#, c-format
msgid "unknown nfs mount option: %s%s\n"
msgstr "volba %s%s pro pøipojení nfs je neznámá\n"
#: mount/nfsmount.c:528
msgid "mount: got bad hp->h_length?\n"
msgstr "mount: ¹patné hp->h_length?\n"
#: mount/nfsmount.c:716
msgid "NFS over TCP is not supported.\n"
msgstr "NFS pøes TCP není podporováno.\n"
#: mount/nfsmount.c:723
msgid "nfs socket"
msgstr "nfs soket"
#: mount/nfsmount.c:727
msgid "nfs bindresvport"
msgstr "nfs bindresvport"
#: mount/nfsmount.c:741
msgid "nfs server reported service unavailable"
msgstr "tato slu¾ba je na tomto nfs serveru nedostupná"
#: mount/nfsmount.c:750
msgid "used portmapper to find NFS port\n"
msgstr "pro nalezení NFS portu jsem pou¾il portmapper\n"
#: mount/nfsmount.c:754
#, c-format
msgid "using port %d for nfs deamon\n"
msgstr "pou¾ívám port %d pro nfs server\n"
#: mount/nfsmount.c:765
msgid "nfs connect"
msgstr "nfs connect"
#: mount/nfsmount.c:852
#, c-format
msgid "unknown nfs status return value: %d"
msgstr "návratová hodnota nfs status %d je neznámá"
#: mount/sundries.c:55
msgid "bug in xstrndup call"
msgstr "chyba ve volání xstrndup"
#: mount/swapon.c:64
#, fuzzy, c-format
msgid ""
"usage: %s [-hV]\n"
" %s -a [-e] [-v]\n"
" %s [-v] [-p priority] special ...\n"
" %s [-s]\n"
msgstr ""
"Pou¾ití: %s [-hV]\n"
" %s -a [-v]\n"
" %s [-v] [-p priorita] zvlá¹tní soubor ...\n"
" %s [-s]\n"
#: mount/swapon.c:74
#, fuzzy, c-format
msgid ""
"usage: %s [-hV]\n"
" %s -a [-v]\n"
" %s [-v] special ...\n"
msgstr ""
"Pou¾ití: %s [-hV]\n"
" %s -a [-v]\n"
" %s [-v] [-p priorita] zvlá¹tní soubor ...\n"
" %s [-s]\n"
#: mount/swapon.c:178 mount/swapon.c:242
#, c-format
msgid "%s on %s\n"
msgstr "%s na %s\n"
#: mount/swapon.c:182
#, c-format
msgid "swapon: cannot stat %s: %s\n"
msgstr "swapon: volání stat pro %s selhalo: %s\n"
#: mount/swapon.c:193
#, c-format
msgid "swapon: warning: %s has insecure permissions %04o, %04o suggested\n"
msgstr ""
"swapon: varování: pøístupová práva pro %s (%04o) nejsou bezpeèná, pou¾ijte %"
"04o\n"
#: mount/swapon.c:205
#, c-format
msgid "swapon: Skipping file %s - it appears to have holes.\n"
msgstr "swapon: soubor %s vynechávám - zdá se, ¾e v nìm jsou díry.\n"
#: mount/swapon.c:248
msgid "Not superuser.\n"
msgstr ""
#: mount/swapon.c:312 mount/swapon.c:407
#, c-format
msgid "%s: cannot open %s: %s\n"
msgstr "%s: %s nelze otevøít: %s\n"
#: mount/umount.c:51
msgid "umount: compiled without support for -f\n"
msgstr "umount byl pøelo¾en bez podpory pro -f\n"
#: mount/umount.c:141
#, fuzzy, c-format
msgid "umount: cannot fork: %s"
msgstr "mount: volání fork selhalo: %s"
#: mount/umount.c:174
#, c-format
msgid "host: %s, directory: %s\n"
msgstr "poèítaè: %s, adresáø: %s\n"
#: mount/umount.c:194
#, c-format
msgid "umount: can't get address for %s\n"
msgstr "umount: adresu %s nelze zjistit\n"
#: mount/umount.c:199
msgid "umount: got bad hostp->h_length\n"
msgstr "umount: chybná hodnota hostp->h_length\n"
#: mount/umount.c:247
#, c-format
msgid "umount: %s: invalid block device"
msgstr "umount: blokové zaøízení %s je chybné"
#: mount/umount.c:249
#, c-format
msgid "umount: %s: not mounted"
msgstr "umount: %s není pøipojeno"
#: mount/umount.c:251
#, c-format
msgid "umount: %s: can't write superblock"
msgstr "umount: superblok nelze na %s zapsat"
#. Let us hope fstab has a line "proc /proc ..."
#. and not "none /proc ..."
#: mount/umount.c:255
#, c-format
msgid "umount: %s: device is busy"
msgstr "umount: zaøízení %s je ji¾ pou¾íváno"
#: mount/umount.c:257
#, c-format
msgid "umount: %s: not found"
msgstr "umount: %s nelze najít"
#: mount/umount.c:259
#, c-format
msgid "umount: %s: must be superuser to umount"
msgstr "umount: musíte být superu¾ivatelem, abyste mohl odpojit %s"
#: mount/umount.c:261
#, c-format
msgid "umount: %s: block devices not permitted on fs"
msgstr "umount: %s: bloková zaøízení nejsou na systému souborù povolena"
#: mount/umount.c:263
#, c-format
msgid "umount: %s: %s"
msgstr "umount: %s: %s"
#: mount/umount.c:319
msgid "no umount2, trying umount...\n"
msgstr "nenalezl jsem umount2, zkou¹ím umount...\n"
#: mount/umount.c:335
#, c-format
msgid "could not umount %s - trying %s instead\n"
msgstr "%s nelze odpojit - zkou¹ím %s\n"
#: mount/umount.c:353
#, c-format
msgid "umount: %s busy - remounted read-only\n"
msgstr ""
"umount: %s je ji¾ pou¾íváno - znovu pøipojeno v re¾imu pro pouze ètení\n"
#: mount/umount.c:363
#, c-format
msgid "umount: could not remount %s read-only\n"
msgstr "umount: %s nelze znovu pøipojit v re¾imu pouze pro ètení\n"
#: mount/umount.c:372
#, c-format
msgid "%s umounted\n"
msgstr "%s odpojeno\n"
#: mount/umount.c:470
msgid "umount: cannot find list of filesystems to unmount"
msgstr "umount: seznam systémù souborù na odpojení nelze nalézt"
#: mount/umount.c:501
#, fuzzy
msgid ""
"Usage: umount [-hV]\n"
" umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
" umount [-f] [-r] [-n] [-v] special | node...\n"
msgstr ""
"Pou¾ití: umount [-hV]\n"
" umount -a [-f] [-r] [-n] [-v] [-t typy vfs]\n"
" umount [-f] [-r] [-n] [-v] speciální soubor | uzel...\n"
#: mount/umount.c:554
#, c-format
msgid "Trying to umount %s\n"
msgstr "Zkou¹ím odpojit %s\n"
#: mount/umount.c:560
#, c-format
msgid "Could not find %s in mtab\n"
msgstr "%s nelze v mtab najít\n"
#: mount/umount.c:567
#, c-format
msgid "umount: %s is not mounted (according to mtab)"
msgstr "umount: podle mtab není %s pøipojeno"
#: mount/umount.c:571
#, c-format
msgid "umount: it seems %s is mounted multiple times"
msgstr "umount: zdá se, ¾e %s je pøipojeno více ne¾ jednou"
#: mount/umount.c:584
#, c-format
msgid "umount: %s is not in the fstab (and you are not root)"
msgstr "umount: %s není ve fstab (a Vy nejste root)"
#: mount/umount.c:588
#, c-format
msgid "umount: %s mount disagrees with the fstab"
msgstr "umount: pøipojení %s neodpovídá fstab"
#: mount/umount.c:629
#, c-format
msgid "umount: only %s can unmount %s from %s"
msgstr "unmount: pouze u¾ivatel %s mù¾e odpojit %s ze %s"
#: mount/umount.c:710
msgid "umount: only root can do that"
msgstr "umount: toto mù¾e provést pouze u¾ivatel root"
#: sys-utils/ctrlaltdel.c:27
msgid "You must be root to set the Ctrl-Alt-Del behaviour.\n"
msgstr "Pouze u¾ivatel root mù¾e nastavit chování Ctrl-Alt-Del.\n"
#: sys-utils/ctrlaltdel.c:42
msgid "Usage: ctrlaltdel hard|soft\n"
msgstr "Pou¾ití: ctrlaltdel hard|soft\n"
#: sys-utils/cytune.c:115
#, c-format
msgid ""
"File %s, For threshold value %lu, Maximum characters in fifo were %d,\n"
"and the maximum transfer rate in characters/second was %f\n"
msgstr ""
"Soubor %s, pro prahovou hodnotu %lu, maximální poèet znakù ve fifo byl %d\n"
"a maximální pøenosová rychlost ve znacích za sekundu byla %f\n"
#: sys-utils/cytune.c:126
#, c-format
msgid ""
"File %s, For threshold value %lu and timrout value %lu, Maximum characters "
"in fifo were %d,\n"
"and the maximum transfer rate in characters/second was %f\n"
msgstr ""
"Soubor %s, pro prahovou hodnotu %lu a èasový limit %lu, maximální poèet "
"znakù\n"
"ve fifo byl %d a maximální pøenosová rychlost ve znacích za sekundu byla %f\n"
#: sys-utils/cytune.c:190
#, c-format
msgid "Invalid interval value: %s\n"
msgstr "Chybné rozpìtí: %s\n"
#: sys-utils/cytune.c:198
#, c-format
msgid "Invalid set value: %s\n"
msgstr "Chybná hodnota: %s\n"
#: sys-utils/cytune.c:206
#, c-format
msgid "Invalid default value: %s\n"
msgstr "Chybná implicitní hodnota: %s\n"
#: sys-utils/cytune.c:214
#, c-format
msgid "Invalid set time value: %s\n"
msgstr "Chybný èasový údaj: %s\n"
#: sys-utils/cytune.c:222
#, c-format
msgid "Invalid default time value: %s\n"
msgstr "Chybný implicitní èasový údaj: %s\n"
#: sys-utils/cytune.c:239
#, c-format
msgid ""
"Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) "
"[-g|-G] file [file...]\n"
msgstr ""
"Pou¾ití: %s [-q [-i interval]] ([-s hodnota]|[-S hodnota]) ([-t hodnota]|[-T "
"hodnota]) [-g|-G] soubor [soubor...]\n"
#: sys-utils/cytune.c:251 sys-utils/cytune.c:270 sys-utils/cytune.c:290
#: sys-utils/cytune.c:340
#, c-format
msgid "Can't open %s: %s\n"
msgstr "%s nelze otevøít: %s\n"
#: sys-utils/cytune.c:258
#, c-format
msgid "Can't set %s to threshold %d: %s\n"
msgstr "%s nelze nastavit na prahovou hodnotu %d: %s\n"
#: sys-utils/cytune.c:277
#, c-format
msgid "Can't set %s to time threshold %d: %s\n"
msgstr "%s nelze nastavit na èasový limit %d: %s\n"
#: sys-utils/cytune.c:295 sys-utils/cytune.c:352 sys-utils/cytune.c:383
#, c-format
msgid "Can't get threshold for %s: %s\n"
msgstr "Prahovou hodnotu pro %s nelze zjistit: %s\n"
#: sys-utils/cytune.c:301 sys-utils/cytune.c:358 sys-utils/cytune.c:389
#, c-format
msgid "Can't get timeout for %s: %s\n"
msgstr "Èasový limit pro %s nelze zjistit: %s\n"
#: sys-utils/cytune.c:307
#, fuzzy, c-format
msgid "%s: %ld current threshold and %ld current timeout\n"
msgstr "%s: %ld %s prahová hodnota a %ld %s èasový limit\n"
#: sys-utils/cytune.c:310
#, fuzzy, c-format
msgid "%s: %ld default threshold and %ld default timeout\n"
msgstr "%s: %ld %s prahová hodnota a %ld %s èasový limit\n"
#: sys-utils/cytune.c:328
msgid "Can't set signal handler"
msgstr "Zpracování signálu nelze nastavit"
#: sys-utils/cytune.c:332 sys-utils/cytune.c:367
msgid "gettimeofday failed"
msgstr "volání gettimeofday selhalo"
#: sys-utils/cytune.c:345 sys-utils/cytune.c:377
#, c-format
msgid "Can't issue CYGETMON on %s: %s\n"
msgstr "CYGETMON nelze na %s provést: %s\n"
#: sys-utils/cytune.c:419
#, fuzzy, c-format
msgid ""
"%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
msgstr ""
"%s: %lu pøeru¹ení, %lu znakù; fifo: %lu práh, %lu èasový limit, %lu max, %lu "
"nyní\n"
#: sys-utils/cytune.c:425
#, c-format
msgid " %f int/sec; %f rec, %f send (char/sec)\n"
msgstr " %f pøer/sek; %f pøíj, %f odesl (znak/sek)\n"
#: sys-utils/cytune.c:430
#, c-format
msgid ""
"%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
msgstr ""
"%s: %lu pøeru¹ení, %lu znakù; fifo: %lu práh, %lu èasový limit, %lu max, %lu "
"nyní\n"
#: sys-utils/cytune.c:436
#, c-format
msgid " %f int/sec; %f rec (char/sec)\n"
msgstr " %f pøer/sek; %f pøíj (znak/sek)\n"
#: sys-utils/dmesg.c:56
#, c-format
msgid "Usage: %s [-c] [-n level] [-s bufsize]\n"
msgstr "Pou¾ití: %s [-c] [-n úroveò] [-s velikost bufferu]\n"
#: sys-utils/ipcrm.c:66
#, c-format
msgid "invalid id: %s\n"
msgstr "Chybné id: %s\n"
#: sys-utils/ipcrm.c:84
#, c-format
msgid "cannot remove id %s (%s)\n"
msgstr "id %s nelze odstranit (%s)\n"
#: sys-utils/ipcrm.c:99
#, fuzzy, c-format
msgid "deprecated usage: %s {shm | msg | sem} id ...\n"
msgstr "Pou¾ití: %s [shm | msg | sem] id ...\n"
#: sys-utils/ipcrm.c:126
#, c-format
msgid "unknown resource type: %s\n"
msgstr "typ zdroje %s není znám\n"
#: sys-utils/ipcrm.c:130
msgid "resource(s) deleted\n"
msgstr "prostøedky smazány\n"
#: sys-utils/ipcrm.c:140
#, c-format
msgid ""
"usage: %s [ [-q msqid] [-m shmid] [-s semid]\n"
" [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n"
msgstr ""
#: sys-utils/ipcrm.c:181
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr ""
#: sys-utils/ipcrm.c:193
#, fuzzy, c-format
msgid "%s: illegal key (%s)\n"
msgstr "Chybná klávesa"
#: sys-utils/ipcrm.c:208 sys-utils/ipcrm.c:240
#, fuzzy
msgid "permission denied for key"
msgstr "mount: pøístup odmítnut"
#: sys-utils/ipcrm.c:211 sys-utils/ipcrm.c:250
msgid "already removed key"
msgstr ""
#: sys-utils/ipcrm.c:214 sys-utils/ipcrm.c:245
#, fuzzy
msgid "invalid key"
msgstr "Chybné id: %s\n"
#: sys-utils/ipcrm.c:217 sys-utils/ipcrm.c:255
msgid "unknown error in key"
msgstr ""
#: sys-utils/ipcrm.c:241
#, fuzzy
msgid "permission denied for id"
msgstr "mount: pøístup odmítnut"
#: sys-utils/ipcrm.c:246
#, fuzzy
msgid "invalid id"
msgstr "Chybné id: %s\n"
#: sys-utils/ipcrm.c:251
msgid "already removed id"
msgstr ""
#: sys-utils/ipcrm.c:256
msgid "unknown error in id"
msgstr ""
#: sys-utils/ipcrm.c:259
#, fuzzy, c-format
msgid "%s: %s (%s)\n"
msgstr "%s na %s\n"
#: sys-utils/ipcrm.c:267
#, fuzzy, c-format
msgid "%s: unknown argument: %s\n"
msgstr "%s: neznámý signál %s\n"
#: sys-utils/ipcs.c:121
#, c-format
msgid "usage : %s -asmq -tclup \n"
msgstr "Pou¾ití : %s -asmq -tclup \n"
#: sys-utils/ipcs.c:122
#, c-format
msgid "\t%s [-s -m -q] -i id\n"
msgstr "\t%s [-s -m -q] -i id\n"
#: sys-utils/ipcs.c:123
#, c-format
msgid "\t%s -h for help.\n"
msgstr "\t%s -h pro nápovìdu.\n"
#: sys-utils/ipcs.c:129
#, fuzzy, c-format
msgid ""
"%s provides information on ipc facilities for which you have read access.\n"
msgstr "%s poskytuje informace o ipc prostøedcích, "
#: sys-utils/ipcs.c:131
msgid ""
"Resource Specification:\n"
"\t-m : shared_mem\n"
"\t-q : messages\n"
msgstr ""
"Zadání prostøedku:\n"
"\t-m : sdílená pamì»\n"
"\t-q : zprávy\n"
#: sys-utils/ipcs.c:132
msgid ""
"\t-s : semaphores\n"
"\t-a : all (default)\n"
msgstr ""
"\t-s : semafory\n"
"\t-a : v¹e (implicitní)\n"
#: sys-utils/ipcs.c:133
msgid ""
"Output Format:\n"
"\t-t : time\n"
"\t-p : pid\n"
"\t-c : creator\n"
msgstr ""
"Výstupní formát:\n"
"\t-t : èas\n"
"\t-p : pid\n"
"\t-c : tvùrce\n"
#: sys-utils/ipcs.c:134
msgid ""
"\t-l : limits\n"
"\t-u : summary\n"
msgstr ""
"\t-l : omezení\n"
"\t-u : shrnutí\n"
#: sys-utils/ipcs.c:135
msgid "-i id [-s -q -m] : details on resource identified by id\n"
msgstr "-i id [-s -q -m] : podrobnosti o prostøedku urèeném dle id\n"
#: sys-utils/ipcs.c:267
msgid "kernel not configured for shared memory\n"
msgstr "jádro nepodporuje sdílenou pamì»\n"
#: sys-utils/ipcs.c:273
msgid "------ Shared Memory Limits --------\n"
msgstr "------ Omezení pro sdílenou pamì» --------\n"
#. glibc 2.1.3 and all earlier libc's have ints as fields
#. of struct shminfo; glibc 2.1.91 has unsigned long; ach
#: sys-utils/ipcs.c:278
#, fuzzy, c-format
msgid "max number of segments = %lu\n"
msgstr "maximální poèet segmentù = %ld\n"
#: sys-utils/ipcs.c:280
#, fuzzy, c-format
msgid "max seg size (kbytes) = %lu\n"
msgstr "maximální velikost segmentu (v kilobajtech) = %ld\n"
#: sys-utils/ipcs.c:282
#, fuzzy, c-format
msgid "max total shared memory (pages) = %lu\n"
msgstr "celkové maximum pro sdílenou pamì» (v kilobajtech) = %ld\n"
#: sys-utils/ipcs.c:284
#, fuzzy, c-format
msgid "min seg size (bytes) = %lu\n"
msgstr "minimální velikost segmentu (v bajtech) = %ld\n"
#: sys-utils/ipcs.c:289
msgid "------ Shared Memory Status --------\n"
msgstr "------ Stav sdílené pamìti --------\n"
#: sys-utils/ipcs.c:290
#, c-format
msgid "segments allocated %d\n"
msgstr "alokované segmenty %d\n"
#: sys-utils/ipcs.c:291
#, c-format
msgid "pages allocated %ld\n"
msgstr "alokované stránky %ld\n"
#: sys-utils/ipcs.c:292
#, c-format
msgid "pages resident %ld\n"
msgstr "rezidentní stránky %ld\n"
#: sys-utils/ipcs.c:293
#, c-format
msgid "pages swapped %ld\n"
msgstr "stránky v odkládacím prostoru %ld\n"
#: sys-utils/ipcs.c:294
#, c-format
msgid "Swap performance: %ld attempts\t %ld successes\n"
msgstr "Statistika pro odkládání: pokusù: %ld\t, z toho úspì¹ných: %ld\n"
#: sys-utils/ipcs.c:299
msgid "------ Shared Memory Segment Creators/Owners --------\n"
msgstr "------ Tvùrci/vlastníci segmentù sdílené pamìti ------\n"
#: sys-utils/ipcs.c:300 sys-utils/ipcs.c:420 sys-utils/ipcs.c:519
#, c-format
msgid "%-10s %-10s %-10s %-10s %-10s %-10s\n"
msgstr "%-10s %-10s %-10s %-10s %-10s %-10s\n"
#: sys-utils/ipcs.c:301 sys-utils/ipcs.c:307 sys-utils/ipcs.c:314
#: sys-utils/ipcs.c:320 sys-utils/ipcs.c:427
msgid "shmid"
msgstr "shmid"
#: sys-utils/ipcs.c:301 sys-utils/ipcs.c:320 sys-utils/ipcs.c:421
#: sys-utils/ipcs.c:436 sys-utils/ipcs.c:520 sys-utils/ipcs.c:538
msgid "perms"
msgstr "práva"
#: sys-utils/ipcs.c:301 sys-utils/ipcs.c:421 sys-utils/ipcs.c:520
msgid "cuid"
msgstr "cuid"
#: sys-utils/ipcs.c:301 sys-utils/ipcs.c:421 sys-utils/ipcs.c:520
msgid "cgid"
msgstr "cgid"
#: sys-utils/ipcs.c:301 sys-utils/ipcs.c:421 sys-utils/ipcs.c:520
msgid "uid"
msgstr "uid"
#: sys-utils/ipcs.c:301 sys-utils/ipcs.c:520
msgid "gid"
msgstr "gid"
#: sys-utils/ipcs.c:305
msgid "------ Shared Memory Attach/Detach/Change Times --------\n"
msgstr "------ Èasy pøipojení/odpojení/zmìny pro sdílenou pamì» --------\n"
#: sys-utils/ipcs.c:306
#, c-format
msgid "%-10s %-10s %-20s %-20s %-20s\n"
msgstr "%-10s %-10s %-20s %-20s %-20s\n"
#: sys-utils/ipcs.c:307 sys-utils/ipcs.c:314 sys-utils/ipcs.c:320
#: sys-utils/ipcs.c:427 sys-utils/ipcs.c:436 sys-utils/ipcs.c:526
#: sys-utils/ipcs.c:532 sys-utils/ipcs.c:538
msgid "owner"
msgstr "vlastník"
#: sys-utils/ipcs.c:307
msgid "attached"
msgstr "pøipojení"
#: sys-utils/ipcs.c:307
msgid "detached"
msgstr "odpojení"
#: sys-utils/ipcs.c:308
msgid "changed"
msgstr "zmìna"
#: sys-utils/ipcs.c:312
msgid "------ Shared Memory Creator/Last-op --------\n"
msgstr "------ Tvùrce sdílené pamìti/poslední operace --------\n"
#: sys-utils/ipcs.c:313 sys-utils/ipcs.c:531
#, c-format
msgid "%-10s %-10s %-10s %-10s\n"
msgstr "%-10s %-10s %-10s %-10s\n"
#: sys-utils/ipcs.c:314
msgid "cpid"
msgstr "cpid"
#: sys-utils/ipcs.c:314
msgid "lpid"
msgstr "lpid"
#: sys-utils/ipcs.c:318
msgid "------ Shared Memory Segments --------\n"
msgstr "------ Segmenty sdílené pamìti --------\n"
#: sys-utils/ipcs.c:319
#, c-format
msgid "%-10s %-10s %-10s %-10s %-10s %-10s %-12s\n"
msgstr "%-10s %-10s %-10s %-10s %-10s %-10s %-12s\n"
#: sys-utils/ipcs.c:320 sys-utils/ipcs.c:436 sys-utils/ipcs.c:538
msgid "key"
msgstr "klíè"
#: sys-utils/ipcs.c:320
msgid "bytes"
msgstr "bajty"
#: sys-utils/ipcs.c:321
msgid "nattch"
msgstr "nattch"
#: sys-utils/ipcs.c:321
msgid "status"
msgstr "stav"
#: sys-utils/ipcs.c:342 sys-utils/ipcs.c:344 sys-utils/ipcs.c:346
#: sys-utils/ipcs.c:458 sys-utils/ipcs.c:460 sys-utils/ipcs.c:559
#: sys-utils/ipcs.c:561 sys-utils/ipcs.c:563 sys-utils/ipcs.c:616
#: sys-utils/ipcs.c:618 sys-utils/ipcs.c:647 sys-utils/ipcs.c:649
#: sys-utils/ipcs.c:651 sys-utils/ipcs.c:675
msgid "Not set"
msgstr "Nenastaveno"
#: sys-utils/ipcs.c:374
msgid "dest"
msgstr "cíl"
#: sys-utils/ipcs.c:375
msgid "locked"
msgstr "zamèeno"
#: sys-utils/ipcs.c:395
msgid "kernel not configured for semaphores\n"
msgstr "jádro nepodporuje semafory\n"
#: sys-utils/ipcs.c:401
msgid "------ Semaphore Limits --------\n"
msgstr "------Omezení pro semafory --------\n"
#: sys-utils/ipcs.c:405
#, c-format
msgid "max number of arrays = %d\n"
msgstr "maximální poèet polí = %d\n"
#: sys-utils/ipcs.c:406
#, c-format
msgid "max semaphores per array = %d\n"
msgstr "maximální poèet semaforù v poli = %d\n"
#: sys-utils/ipcs.c:407
#, c-format
msgid "max semaphores system wide = %d\n"
msgstr "celkový maximální poèet semaforù = %d\n"
#: sys-utils/ipcs.c:408
#, c-format
msgid "max ops per semop call = %d\n"
msgstr "maximální poèet operací na jedno semop volání = %d\n"
#: sys-utils/ipcs.c:409
#, c-format
msgid "semaphore max value = %d\n"
msgstr "maximální hodnota semaforu = %d\n"
#: sys-utils/ipcs.c:413
msgid "------ Semaphore Status --------\n"
msgstr "------ Stav semaforu --------\n"
#: sys-utils/ipcs.c:414
#, c-format
msgid "used arrays = %d\n"
msgstr "pou¾itá pole = %d\n"
#: sys-utils/ipcs.c:415
#, c-format
msgid "allocated semaphores = %d\n"
msgstr "alokované semafory = %d\n"
#: sys-utils/ipcs.c:419
msgid "------ Semaphore Arrays Creators/Owners --------\n"
msgstr "------ Tvùrci/vlastníci polí semaforù --------\n"
#: sys-utils/ipcs.c:421 sys-utils/ipcs.c:436
msgid "semid"
msgstr "semid"
#: sys-utils/ipcs.c:425
msgid "------ Shared Memory Operation/Change Times --------\n"
msgstr "------ Èasy operace/zmìny sdílené pamìti --------\n"
#: sys-utils/ipcs.c:426
#, c-format
msgid "%-8s %-10s %-26.24s %-26.24s\n"
msgstr "%-8s %-10s %-26.24s %-26.24s\n"
#: sys-utils/ipcs.c:427
msgid "last-op"
msgstr "poslední operace"
#: sys-utils/ipcs.c:427
msgid "last-changed"
msgstr "poslední zmìna"
#: sys-utils/ipcs.c:434
msgid "------ Semaphore Arrays --------\n"
msgstr "------ Pole semaforù --------\n"
#: sys-utils/ipcs.c:435 sys-utils/ipcs.c:678
#, c-format
msgid "%-10s %-10s %-10s %-10s %-10s\n"
msgstr "%-10s %-10s %-10s %-10s %-10s\n"
#: sys-utils/ipcs.c:437
msgid "nsems"
msgstr "nsems"
#: sys-utils/ipcs.c:496
msgid "kernel not configured for message queues\n"
msgstr "jádro nepodporuje fronty zpráv\n"
#: sys-utils/ipcs.c:504
msgid "------ Messages: Limits --------\n"
msgstr "------ Zprávy: Omezení --------\n"
#: sys-utils/ipcs.c:505
#, c-format
msgid "max queues system wide = %d\n"
msgstr "celkový maximální poèet front = %d\n"
#: sys-utils/ipcs.c:506
#, c-format
msgid "max size of message (bytes) = %d\n"
msgstr "maximální velikost zprávy (v bajtech) = %d\n"
#: sys-utils/ipcs.c:507
#, c-format
msgid "default max size of queue (bytes) = %d\n"
msgstr "implicitní maximální velikost fronty (v bajtech) = %d\n"
#: sys-utils/ipcs.c:511
msgid "------ Messages: Status --------\n"
msgstr "------ Zprávy: Stav --------\n"
#: sys-utils/ipcs.c:512
#, c-format
msgid "allocated queues = %d\n"
msgstr "alokované fronty = %d\n"
#: sys-utils/ipcs.c:513
#, c-format
msgid "used headers = %d\n"
msgstr "pou¾ité hlavièky = %d\n"
#: sys-utils/ipcs.c:514
#, c-format
msgid "used space = %d bytes\n"
msgstr "pou¾itý prostor (v bajtech) = %d\n"
#: sys-utils/ipcs.c:518
msgid "------ Message Queues: Creators/Owners --------\n"
msgstr "------ Fronty zpráv: Tvùrci/Vlastníci --------\n"
#: sys-utils/ipcs.c:520 sys-utils/ipcs.c:526 sys-utils/ipcs.c:532
#: sys-utils/ipcs.c:538
msgid "msqid"
msgstr "msqid"
#: sys-utils/ipcs.c:524
msgid "------ Message Queues Send/Recv/Change Times --------\n"
msgstr "------ Èasy odeslání.pøíchodu/zmìny pro fronty zpráv --------\n"
#: sys-utils/ipcs.c:525
#, c-format
msgid "%-8s %-10s %-20s %-20s %-20s\n"
msgstr "%-8s %-10s %-20s %-20s %-20s\n"
#: sys-utils/ipcs.c:526
msgid "send"
msgstr "odeslání"
#: sys-utils/ipcs.c:526
msgid "recv"
msgstr "pøíjem"
#: sys-utils/ipcs.c:526
msgid "change"
msgstr "zmìna"
#: sys-utils/ipcs.c:530
msgid "------ Message Queues PIDs --------\n"
msgstr "------ PID pro fronty zpráv --------\n"
#: sys-utils/ipcs.c:532
msgid "lspid"
msgstr "lspid"
#: sys-utils/ipcs.c:532
msgid "lrpid"
msgstr "lrpid"
#: sys-utils/ipcs.c:536
msgid "------ Message Queues --------\n"
msgstr "------ Fronty zpráv --------\n"
#: sys-utils/ipcs.c:537
#, c-format
msgid "%-10s %-10s %-10s %-10s %-12s %-12s\n"
msgstr "%-10s %-10s %-10s %-10s %-12s %-12s\n"
#: sys-utils/ipcs.c:539
msgid "used-bytes"
msgstr "u¾ité bajty"
#: sys-utils/ipcs.c:539
msgid "messages"
msgstr "zprávy"
#: sys-utils/ipcs.c:607
#, c-format
msgid ""
"\n"
"Shared memory Segment shmid=%d\n"
msgstr ""
"\n"
"shmid segmentu sdílené pamìti = %d\n"
#: sys-utils/ipcs.c:608
#, c-format
msgid "uid=%d\tgid=%d\tcuid=%d\tcgid=%d\n"
msgstr "uid=%d\tgid=%d\tcuid=%d\tcgid=%d\n"
#: sys-utils/ipcs.c:610
#, c-format
msgid "mode=%#o\taccess_perms=%#o\n"
msgstr "mód=%#o\tpøístupová práva=%#o\n"
#: sys-utils/ipcs.c:612
#, fuzzy, c-format
msgid "bytes=%ld\tlpid=%d\tcpid=%d\tnattch=%ld\n"
msgstr "bajtù=%d\tlpid=%d\tcpid=%d\tnattch=%ld\n"
#: sys-utils/ipcs.c:615
#, c-format
msgid "att_time=%-26.24s\n"
msgstr "pøipoj_èas=%-26.24s\n"
#: sys-utils/ipcs.c:617
#, c-format
msgid "det_time=%-26.24s\n"
msgstr "odpoj_èas=%-26.24s\n"
#: sys-utils/ipcs.c:619 sys-utils/ipcs.c:650
#, c-format
msgid "change_time=%-26.24s\n"
msgstr "èas_zmìny=%-26.24s\n"
#: sys-utils/ipcs.c:634
#, c-format
msgid ""
"\n"
"Message Queue msqid=%d\n"
msgstr ""
"\n"
"msgid fronty zpráv=%d\n"
#: sys-utils/ipcs.c:635
#, c-format
msgid "uid=%d\tgid=%d\tcuid=%d\tcgid=%d\tmode=%#o\n"
msgstr "uid=%d\tgid=%d\tcuid=%d\tcgid=%d\tmód=%#o\n"
#: sys-utils/ipcs.c:637
#, c-format
msgid "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
msgstr "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
#: sys-utils/ipcs.c:646
#, c-format
msgid "send_time=%-26.24s\n"
msgstr "èas odeslání=%-26.24s\n"
#: sys-utils/ipcs.c:648
#, c-format
msgid "rcv_time=%-26.24s\n"
msgstr "èas pøíjmu=%-26.24s\n"
#: sys-utils/ipcs.c:668
#, c-format
msgid ""
"\n"
"Semaphore Array semid=%d\n"
msgstr ""
"\n"
"semid pole semaforù = %d\n"
#: sys-utils/ipcs.c:669
#, c-format
msgid "uid=%d\t gid=%d\t cuid=%d\t cgid=%d\n"
msgstr "uid=%d\t gid=%d\t cuid=%d\t cgid=%d\n"
#: sys-utils/ipcs.c:671
#, c-format
msgid "mode=%#o, access_perms=%#o\n"
msgstr "mód=%#o, pøístupová práva=%#o\n"
#: sys-utils/ipcs.c:673
#, c-format
msgid "nsems = %ld\n"
msgstr "nsems = %ld\n"
#: sys-utils/ipcs.c:674
#, c-format
msgid "otime = %-26.24s\n"
msgstr "èas poslední operace = %-26.24s\n"
#: sys-utils/ipcs.c:676
#, c-format
msgid "ctime = %-26.24s\n"
msgstr "èas zmìny = %-26.24s\n"
#: sys-utils/ipcs.c:679
msgid "semnum"
msgstr "semnum"
#: sys-utils/ipcs.c:679
msgid "value"
msgstr "hodnota"
#: sys-utils/ipcs.c:679
msgid "ncount"
msgstr "ncount"
#: sys-utils/ipcs.c:679
msgid "zcount"
msgstr "zcount"
#: sys-utils/ipcs.c:679
msgid "pid"
msgstr "pid"
#: sys-utils/rdev.c:69
msgid "usage: rdev [ -rv ] [ -o OFFSET ] [ IMAGE [ VALUE [ OFFSET ] ] ]"
msgstr "Pou¾ití: rdev [ -rv ] [ -o POSUN ] [ OBRAZ [ HODNOTA [ POSUN ] ] ]"
#: sys-utils/rdev.c:70
msgid ""
" rdev /dev/fd0 (or rdev /linux, etc.) displays the current ROOT device"
msgstr " rdev /dev/fd0 (èi rdev /linux, etc.) vypí¹e aktuální ROOT zaøízení"
#: sys-utils/rdev.c:71
msgid " rdev /dev/fd0 /dev/hda2 sets ROOT to /dev/hda2"
msgstr " rdev /dev/fd0 /dev/hda2 nastaví ROOT na /dev/hda2"
#: sys-utils/rdev.c:72
msgid " rdev -R /dev/fd0 1 set the ROOTFLAGS (readonly status)"
msgstr ""
" rdev -R /dev/fd0 1 nastaví PØÍZNAKY ROOT (pouze pro ètení)"
#: sys-utils/rdev.c:73
msgid " rdev -r /dev/fd0 627 set the RAMDISK size"
msgstr " rdev -r /dev/fd0 627 nastaví velikost RAMDISKU"
#: sys-utils/rdev.c:74
msgid " rdev -v /dev/fd0 1 set the bootup VIDEOMODE"
msgstr " rdev -v /dev/fd0 1 nastaví startovací VIDEOMÓD"
#: sys-utils/rdev.c:75
msgid " rdev -o N ... use the byte offset N"
msgstr " rdev -o N ... posun v bajtech"
#: sys-utils/rdev.c:76
msgid " rootflags ... same as rdev -R"
msgstr " root pøíznaky ... stejné jako rdev -R"
#: sys-utils/rdev.c:77
msgid " ramsize ... same as rdev -r"
msgstr " velikost ram ... stejné jako rdev -r"
#: sys-utils/rdev.c:78
msgid " vidmode ... same as rdev -v"
msgstr " vidmód ... stejné jako rdev -v"
#: sys-utils/rdev.c:79
msgid ""
"Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..."
msgstr ""
"Poznámka: video módy: -3=Ask, -2=Extended, -1=NormalVga, 1=kláv1, 2=kláv2,..."
#: sys-utils/rdev.c:80
msgid " use -R 1 to mount root readonly, -R 0 for read/write."
msgstr " Pomocí -R 1 pøipojíte pouze pro ètení, -R 0 umo¾ní zápis."
#: sys-utils/rdev.c:247
msgid "missing comma"
msgstr "chybí èárka"
#: sys-utils/readprofile.c:72
#, fuzzy
msgid "out of memory"
msgstr "nedostatek pamìti?\n"
#: sys-utils/readprofile.c:118
#, fuzzy, c-format
msgid ""
"%s: Usage: \"%s [options]\n"
"\t -m <mapfile> (defaults: \"%s\" and\n"
"\t\t\t\t \"%s\")\n"
"\t -p <pro-file> (default: \"%s\")\n"
"\t -M <mult> set the profiling multiplier to <mult>\n"
"\t -i print only info about the sampling step\n"
"\t -v print verbose data\n"
"\t -a print all symbols, even if count is 0\n"
"\t -b print individual histogram-bin counts\n"
"\t -s print individual counters within functions\n"
"\t -r reset all the counters (root only)\n"
"\t -n disable byte order auto-detection\n"
"\t -V print version and exit\n"
msgstr ""
"%s: Pou¾ití: \"%s [pøepínaèe]\n"
"\t -m <mapsoubor> (implicitní = \"%s\")\n"
"\t -p <pro-soubor> (implicitní = \"%s\")\n"
"\t -M <hodnota> nastaví HODNOTU profilovacího multiplikátoru\n"
"\t -i vypí¹e pouze informace o profilovacím kroku\n"
"\t -v vypí¹e podrobné informace\n"
"\t -a vypí¹e ve¹keré symboly i pokud je hodnota èítaèe 0\n"
"\t -r vynuluje ve¹keré èítaèe (pouze root)\n"
"\t -V vypí¹e informace o verzi a skonèí\n"
#: sys-utils/readprofile.c:197
#, fuzzy, c-format
msgid "%s version %s\n"
msgstr "%s Verze %s\n"
#: sys-utils/readprofile.c:284
#, c-format
msgid "Sampling_step: %i\n"
msgstr "Profilovací_krok: %i\n"
#: sys-utils/readprofile.c:305 sys-utils/readprofile.c:329
#, c-format
msgid "%s: %s(%i): wrong map line\n"
msgstr "%s: %s(%i): chybný map øádek\n"
#: sys-utils/readprofile.c:317
#, c-format
msgid "%s: can't find \"_stext\" in %s\n"
msgstr "%s: \"_stext\" nelze v %s nalézt\n"
#: sys-utils/readprofile.c:343
#, c-format
msgid "%s: profile address out of range. Wrong map file?\n"
msgstr "%s: adresa profilu je mimo rozsah. Chybný mapovací soubor?\n"
#: sys-utils/readprofile.c:401
msgid "total"
msgstr "celkem"
#: sys-utils/renice.c:68
msgid ""
"usage: renice priority [ [ -p ] pids ] [ [ -g ] pgrps ] [ [ -u ] users ]\n"
msgstr ""
"Pou¾ití: renice priorita [ [ -p ] pid ] [[ -g ] pgrp ] [ [ -u ] u¾ivatel ]\n"
#: sys-utils/renice.c:97
#, c-format
msgid "renice: %s: unknown user\n"
msgstr "renice: %s: neznámý u¾ivatel\n"
#: sys-utils/renice.c:105
#, c-format
msgid "renice: %s: bad value\n"
msgstr "renice: %s: chybná hodnota\n"
#: sys-utils/renice.c:123 sys-utils/renice.c:135
msgid "getpriority"
msgstr "getpriority"
#: sys-utils/renice.c:128
msgid "setpriority"
msgstr "setpriority"
#: sys-utils/renice.c:139
#, c-format
msgid "%d: old priority %d, new priority %d\n"
msgstr "%d: pùvodní priorita %d, nová priorita %d\n"
#: sys-utils/setsid.c:26
#, c-format
msgid "usage: %s program [arg ...]\n"
msgstr "Pou¾ití: %s program [arg ...]\n"
#: sys-utils/tunelp.c:75
#, c-format
msgid ""
"Usage: %s <device> [ -i <IRQ> | -t <TIME> | -c <CHARS> | -w <WAIT> | \n"
" -a [on|off] | -o [on|off] | -C [on|off] | -q [on|off] | -s | \n"
" -T [on|off] ]\n"
msgstr ""
"Pou¾ití: %s <zaøízení> [ -i <IRQ> | -t <ÈAS> | -c <ZNAKY> | -w <ÈEKÁNÍ> | \n"
" -a [on|off] | -o [on|off] | -C [on|off] | -q [on|off] | -s |\n"
" -T [on|off] ]\n"
#: sys-utils/tunelp.c:91
msgid "malloc error"
msgstr "chyba malloc"
#: sys-utils/tunelp.c:103
#, c-format
msgid "%s: bad value\n"
msgstr "%s: chybná hodnota\n"
#: sys-utils/tunelp.c:242
#, c-format
msgid "%s: %s not an lp device.\n"
msgstr "%s: %s není lp zaøízením\n"
#: sys-utils/tunelp.c:263
#, c-format
msgid "%s status is %d"
msgstr "status %s je %d"
#: sys-utils/tunelp.c:264
msgid ", busy"
msgstr ", zaneprázdnìna"
#: sys-utils/tunelp.c:265
msgid ", ready"
msgstr ", pøipravena"
#: sys-utils/tunelp.c:266
msgid ", out of paper"
msgstr ", do¹el papír"
#: sys-utils/tunelp.c:267
msgid ", on-line"
msgstr ", zapnuta"
#: sys-utils/tunelp.c:268
msgid ", error"
msgstr ", chyba"
#: sys-utils/tunelp.c:285
msgid "LPGETIRQ error"
msgstr "chyba LPGETIRQ"
#: sys-utils/tunelp.c:291
#, c-format
msgid "%s using IRQ %d\n"
msgstr "%s pou¾ívá IRQ %d\n"
#: sys-utils/tunelp.c:293
#, c-format
msgid "%s using polling\n"
msgstr "%s pou¾ívá poll\n"
#: text-utils/col.c:153
#, c-format
msgid "col: bad -l argument %s.\n"
msgstr "col: chybný argument %s pro pøepínaè -l\n"
#: text-utils/col.c:535
msgid "usage: col [-bfpx] [-l nline]\n"
msgstr "Pou¾ití: col [-bfpx] [-l poè. øádkù]\n"
#: text-utils/col.c:541
msgid "col: write error.\n"
msgstr "col: chyba pøi ukládání\n"
#: text-utils/col.c:548
#, c-format
msgid "col: warning: can't back up %s.\n"
msgstr "col: varování: %s nelze zazálohovat.\n"
#: text-utils/col.c:549
msgid "past first line"
msgstr "jsem za prvním øádkem"
#: text-utils/col.c:549
msgid "-- line already flushed"
msgstr "-- øádek ji¾ není v bufru"
#: text-utils/colcrt.c:97
#, c-format
msgid "usage: %s [ - ] [ -2 ] [ file ... ]\n"
msgstr "Pou¾ití: %s [ - ] [-2 ] [ soubor ... ]\n"
#: text-utils/column.c:297
msgid "line too long"
msgstr "øádek je pøíli¹ dlouhý"
#: text-utils/column.c:374
msgid "usage: column [-tx] [-c columns] [file ...]\n"
msgstr "Pou¾ití: column [-tx] [c sloupce] [soubor ...]\n"
#: text-utils/hexsyntax.c:82
msgid "hexdump: bad length value.\n"
msgstr "hexdump: chybná délka\n"
#: text-utils/hexsyntax.c:93
msgid "hexdump: bad skip value.\n"
msgstr "hexdump: chybná vzdálenost\n"
#: text-utils/hexsyntax.c:131
#, fuzzy
msgid ""
"hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n"
msgstr ""
"hexdump: [-bcdovx] [-e fmt] [-f fmt_soubor] [-n délka] [-s vzdálenost] "
"[soubor ...]\n"
#: text-utils/more.c:261
#, c-format
msgid "usage: %s [-dflpcsu] [+linenum | +/pattern] name1 name2 ...\n"
msgstr "Pou¾ití: %s [-dflpcsu] [+èíslo øádku | +/vzorek] název1 název2 ...\n"
#: text-utils/more.c:485
#, fuzzy, c-format
msgid "%s: unknown option \"-%c\"\n"
msgstr "%s: neznámý signál %s\n"
#: text-utils/more.c:517
#, c-format
msgid ""
"\n"
"*** %s: directory ***\n"
"\n"
msgstr ""
"\n"
"*** %s je adresáø ***\n"
"\n"
#. simple ELF detection
#: text-utils/more.c:560
#, c-format
msgid ""
"\n"
"******** %s: Not a text file ********\n"
"\n"
msgstr ""
"\n"
"***** %s není textovým souborem *****\n"
"\n"
#: text-utils/more.c:663
msgid "[Use q or Q to quit]"
msgstr "[Stisknìte q èi Q pro ukonèení]"
#: text-utils/more.c:755
msgid "--More--"
msgstr "--Pokraèování--"
#: text-utils/more.c:757
#, c-format
msgid "(Next file: %s)"
msgstr "(Dal¹í soubor: %s)"
#: text-utils/more.c:762
msgid "[Press space to continue, 'q' to quit.]"
msgstr "[Stisknìte mezerník pro pokraèování, 'q' pro ukonèení.]"
#: text-utils/more.c:1161
#, fuzzy, c-format
msgid "...back %d pages"
msgstr "...pøeskakuji zpìt o poèet stran: %d"
#: text-utils/more.c:1163
#, fuzzy
msgid "...back 1 page"
msgstr "...pøeskakuji zpìt o poèet stran: %d"
#: text-utils/more.c:1206
#, fuzzy
msgid "...skipping one line"
msgstr "...pøeskakuji o poèet øádkù: %d"
#: text-utils/more.c:1208
#, fuzzy, c-format
msgid "...skipping %d lines"
msgstr "...pøeskakuji o poèet øádkù: %d"
#: text-utils/more.c:1245
msgid ""
"\n"
"***Back***\n"
"\n"
msgstr ""
"\n"
"***Zpìt***\n"
#: text-utils/more.c:1283
msgid ""
"\n"
"Most commands optionally preceded by integer argument k. Defaults in "
"brackets.\n"
"Star (*) indicates argument becomes new default.\n"
msgstr ""
"\n"
"Vìt¹inì pøíkazù mù¾e jako argument pøedcházet celé èíslo k. Implicitní "
"hodnoty\n"
"jsou v hranatých závorkách. Hvìzdièka (*) znamená, ¾e hodnota argumentu se\n"
"stane implicitní.\n"
#: text-utils/more.c:1290
#, fuzzy
msgid ""
"<space> Display next k lines of text [current screen size]\n"
"z Display next k lines of text [current screen size]*\n"
"<return> Display next k lines of text [1]*\n"
"d or ctrl-D Scroll k lines [current scroll size, initially 11]*\n"
"q or Q or <interrupt> Exit from more\n"
"s Skip forward k lines of text [1]\n"
"f Skip forward k screenfuls of text [1]\n"
"b or ctrl-B Skip backwards k screenfuls of text [1]\n"
"' Go to place where previous search started\n"
"= Display current line number\n"
"/<regular expression> Search for kth occurrence of regular expression [1]\n"
"n Search for kth occurrence of last r.e [1]\n"
"!<cmd> or :!<cmd> Execute <cmd> in a subshell\n"
"v Start up /usr/bin/vi at current line\n"
"ctrl-L Redraw screen\n"
":n Go to kth next file [1]\n"
":p Go to kth previous file [1]\n"
":f Display current file name and line number\n"
". Repeat previous command\n"
msgstr ""
"<mezerník>\t\tZobrazí dal¹ích k øádkù textu. [aktuální velikost\n"
"\t\t\tobrazovky]\n"
"z\t\t\tZobrazí dal¹ích k øádkù textu. [aktuální velikost\n"
"\t\t\tobrazovky]*\n"
"<return>\t\tZobrazí dal¹ích k øádkù textu. [1]*\n"
"d èi ctrl-D\t\tPosun o k øádkù [aktuální velikost posunu, po spu¹tìní\n"
"\t\t\t11]*\n"
"q èi Q èi <interrupt>\tUkonèení programu\n"
"s\t\t\tPosun vpøed o k øádkù [1]\n"
"f\t\t\tPosun vpøed o k stran [1]\n"
"b èi ctrl-B\t\tPosun vzad o k stran [1]\n"
"'\t\t\tPøeskoèí na místo, kde bylo zahájeno pøedchozí hledání\n"
"=\t\t\tZobrazí èíslo aktuálního øádku\n"
"/<regulární výraz>\tHledá ktý výskyt regulárního výrazu [1]\n"
"n\t\t\tHledá ktý výrazu posledního regulárního výrazu [1]\n"
"!<pøíkaz> èi :!<pøíkaz>\tSpustí <pøíkaz> v podshellu\n"
"v\t\t\tSpustí /usr/bin/vi na aktuálním øádku\n"
"ctrl-L\t\t\tPøekreslí obrazovku\n"
":n\t\t\tPøeskoèí na ktý následující soubor [1]\n"
":p\t\t\tPøeskoèí na ktý pøedcházející soubor [1]\n"
":f\t\t\tVypí¹e jméno aktuálního souboru a èíslo aktuálního øádku\n"
".\t\t\tZopakuje pøedcházející pøíkaz\n"
#: text-utils/more.c:1359 text-utils/more.c:1364
msgid "[Press 'h' for instructions.]"
msgstr "[Stisknìte 'h' pro nápovìdu.]"
#: text-utils/more.c:1398
#, c-format
msgid "\"%s\" line %d"
msgstr "\"%s\" øádek %d"
#: text-utils/more.c:1400
#, c-format
msgid "[Not a file] line %d"
msgstr "[Nejedná se o soubor] øádek %d"
#: text-utils/more.c:1484
msgid " Overflow\n"
msgstr " Pøeteèení\n"
#: text-utils/more.c:1531
msgid "...skipping\n"
msgstr "...vynechávám\n"
#: text-utils/more.c:1560
msgid "Regular expression botch"
msgstr "Chyba v regulárním výrazu"
#: text-utils/more.c:1572
msgid ""
"\n"
"Pattern not found\n"
msgstr ""
"\n"
"Vzorek nebyl nalezen\n"
#: text-utils/more.c:1575 text-utils/pg.c:1145 text-utils/pg.c:1296
msgid "Pattern not found"
msgstr "Vzorek nebyl nalezen"
#: text-utils/more.c:1636
msgid "can't fork\n"
msgstr "volání fork selhalo\n"
#: text-utils/more.c:1675
msgid ""
"\n"
"...Skipping "
msgstr ""
"\n"
"...Vynechávám "
#: text-utils/more.c:1679
#, fuzzy
msgid "...Skipping to file "
msgstr "...Pøecházím "
#: text-utils/more.c:1681
#, fuzzy
msgid "...Skipping back to file "
msgstr "zpìt na soubor "
#: text-utils/more.c:1959
msgid "Line too long"
msgstr "Øádek je pøíli¹ dlouhý"
#: text-utils/more.c:2002
msgid "No previous command to substitute for"
msgstr "Neexistuje ¾ádný pøíkaz, jen¾ by bylo mo¾no nahradit"
#: text-utils/odsyntax.c:130
msgid "od: od(1) has been deprecated for hexdump(1).\n"
msgstr "od: program od(1) je zastaralý, místo nìj pou¾ijte hexdump(1).\n"
#: text-utils/odsyntax.c:133
#, c-format
msgid "od: hexdump(1) compatibility doesn't support the -%c option%s\n"
msgstr "od: re¾im kompatibility s hexdump(1) nepodporuje -%c volbu%s\n"
#: text-utils/odsyntax.c:134
msgid "; see strings(1)."
msgstr "; viz strings(1)."
#: text-utils/parse.c:63
#, c-format
msgid "hexdump: can't read %s.\n"
msgstr "hexdump: %s nelze èíst.\n"
#: text-utils/parse.c:68
msgid "hexdump: line too long.\n"
msgstr "hexdump: øádek je pøíli¹ dlouhý.\n"
#: text-utils/parse.c:401
msgid "hexdump: byte count with multiple conversion characters.\n"
msgstr "hexdump: poèet bajtù s více ne¾ jedním konverzním znakem.\n"
#: text-utils/parse.c:483
#, c-format
msgid "hexdump: bad byte count for conversion character %s.\n"
msgstr "hexdump: chybný poèet bajtù pro konverzní znak %s.\n"
#: text-utils/parse.c:490
#, c-format
msgid "hexdump: %%s requires a precision or a byte count.\n"
msgstr "hexdump: %%s vy¾aduje uvedení pøesnosti èi poètu bajtù.\n"
#: text-utils/parse.c:496
#, c-format
msgid "hexdump: bad format {%s}\n"
msgstr "hexdump: chybný formát {%s}\n"
#: text-utils/parse.c:502
#, c-format
msgid "hexdump: bad conversion character %%%s.\n"
msgstr "hexdump: chybný znak v konverzi %%%s.\n"
#: text-utils/pg.c:257
#, c-format
msgid ""
"%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n"
msgstr ""
#: text-utils/pg.c:266
#, fuzzy, c-format
msgid "%s: option requires an argument -- %s\n"
msgstr "pøepínaè `%s' vy¾aduje argument\n"
#: text-utils/pg.c:274
#, fuzzy, c-format
msgid "%s: illegal option -- %s\n"
msgstr "Chybná klávesa"
#: text-utils/pg.c:391
#, fuzzy
msgid "...skipping forward\n"
msgstr "...vynechávám\n"
#: text-utils/pg.c:393
#, fuzzy
msgid "...skipping backward\n"
msgstr "...vynechávám\n"
#: text-utils/pg.c:415
#, fuzzy
msgid "No next file"
msgstr "(Dal¹í soubor: %s)"
#: text-utils/pg.c:419
#, fuzzy
msgid "No previous file"
msgstr "Nejsou definovány ¾ádné diskové oddíly\n"
#: text-utils/pg.c:949
#, fuzzy, c-format
msgid "%s: Read error from %s file\n"
msgstr "%s: chyba zápisu na %s\n"
#.
#. * Most likely '\0' in input.
#.
#: text-utils/pg.c:955
#, c-format
msgid "%s: Unexpected EOF in %s file\n"
msgstr ""
#: text-utils/pg.c:958
#, fuzzy, c-format
msgid "%s: Unknown error in %s file\n"
msgstr "%s: chyba zápisu na %s\n"
#: text-utils/pg.c:1053
#, fuzzy, c-format
msgid "%s: Cannot create tempfile\n"
msgstr "%s: doèasný soubor nelze èíst.\n"
#: text-utils/pg.c:1062 text-utils/pg.c:1237
#, fuzzy
msgid "RE error: "
msgstr ", chyba"
#: text-utils/pg.c:1219
msgid "(EOF)"
msgstr ""
#: text-utils/pg.c:1245
msgid "No remembered search string"
msgstr ""
#: text-utils/pg.c:1328
#, fuzzy
msgid "Cannot open "
msgstr "%s nelze otevøít.\n"
#: text-utils/pg.c:1376
#, fuzzy
msgid "saved"
msgstr "odeslání"
#: text-utils/pg.c:1483
msgid ": !command not allowed in rflag mode.\n"
msgstr ""
#: text-utils/pg.c:1515
#, fuzzy
msgid "fork() failed, try again later\n"
msgstr "Heslo *NEBYLO* zmìnìno. Zkuste to pozdìji.\n"
#: text-utils/pg.c:1720
#, fuzzy
msgid "(Next file: "
msgstr "(Dal¹í soubor: %s)"
#: text-utils/rev.c:113
msgid "Unable to allocate bufferspace\n"
msgstr "Místo pro buffer nelze naalokovat.\n"
#: text-utils/rev.c:156
msgid "usage: rev [file ...]\n"
msgstr "Pou¾ití: rev [soubor ...]\n"
#: text-utils/ul.c:141
#, c-format
msgid "usage: %s [ -i ] [ -tTerm ] file...\n"
msgstr "Pou¾ití: %s [ -i ] [-tTerm ] soubor...\n"
#: text-utils/ul.c:152
msgid "trouble reading terminfo"
msgstr "chyba pøi ètení terminfo databáze"
#: text-utils/ul.c:242
#, c-format
msgid "Unknown escape sequence in input: %o, %o\n"
msgstr "Neznámá posloupnost øídících znakù na vstupu: %o, %o\n"
#: text-utils/ul.c:425
msgid "Unable to allocate buffer.\n"
msgstr "Buffer nelze naalokovat.\n"
#: text-utils/ul.c:586
msgid "Input line too long.\n"
msgstr "Vstupní øádka je pøíli¹ dlouhá.\n"
#: text-utils/ul.c:599
msgid "Out of memory when growing buffer.\n"
msgstr "Nedostatek pamìti pro rostoucí buffer.\n"
#~ msgid "mount: fs type %s not supported by kernel"
#~ msgstr "mount: typ ss %s není podporován jádrem"
#~ msgid "BLKGETSIZE ioctl failed for %s\n"
#~ msgstr "volání BLKGETSIZE ioctl pro %s selhalo\n"
#~ msgid "%s: not compiled with minix v2 support\n"
#~ msgstr "pøi pøekladu %s nebyla zvolena podpora minix v2\n"
#~ msgid "Boot (%02X)"
#~ msgstr "Startovací (%02X)"
#~ msgid "None (%02X)"
#~ msgstr "®ádný (%02X)"
#, fuzzy
#~ msgid "%s: [%04llx]:%llu (%s) offset %llu, %s encryption\n"
#~ msgstr "%s: [%04x]:%ld (%s) posun %d, %s ¹ifra\n"
#~ msgid ""
#~ "mount: Could not find any loop device.\n"
#~ " Maybe /dev/loop# has a wrong major number?"
#~ msgstr ""
#~ "mount: ¾ádné loop zaøízení nelze nalézt.\n"
#~ " Nemá /dev/loop# chybné vìt¹í èíslo zaøízení?"
#~ msgid ""
#~ "mount: Could not find any loop device. Maybe this kernel does not know\n"
#~ " about the loop device (then recompile or `insmod loop.o'), or\n"
#~ " maybe /dev/loop# has the wrong major number?"
#~ msgstr ""
#~ "mount: ®ádné loop zaøízení nelze nalézt. Mo¾ná toto jádro nezná loop "
#~ "zaøízení\n"
#~ " (pak jej znovu pøelo¾te, èi zkuste `insmod loop.o'), èi /dev/loop# "
#~ "má\n"
#~ " chybné vìt¹í èíslo?"
#, fuzzy
#~ msgid "Error: unable to open %s for reading\n"
#~ msgstr "%s pro ètení nelze otevøít"
#, fuzzy
#~ msgid "Retype password: "
#~ msgstr "Potvrïte nové heslo: "
#, fuzzy
#~ msgid "Error: gpg key file decryption failed\n"
#~ msgstr "adresáø nelze otevøít\n"
#, fuzzy
#~ msgid "Error: Password must be at least %d characters.\n"
#~ msgstr "Heslo musí obsahovat alespoò 6 znakù, zkuste to znovu.\n"
#, fuzzy
#~ msgid "Error: Unable to allocate memory\n"
#~ msgstr "Nelze alokovat více pamìti\n"
#~ msgid "Init (up to 16 hex digits): "
#~ msgstr "Init (a¾ 16 ¹estnáctkových èíslic): "
#~ msgid "Non-hex digit '%c'.\n"
#~ msgstr "Ne¹estnáctková èíslice '%c'.\n"
#~ msgid "Don't know how to get key for encryption system %d\n"
#~ msgstr "Nevím jak získat klíè pro ¹ifrovací systém %d\n"
#, fuzzy
#~ msgid "Error: unable to open /etc/fstab for reading\n"
#~ msgstr "%s pro ètení nelze otevøít"
#, fuzzy
#~ msgid "mount: %s duplicate - not mounted"
#~ msgstr "umount: %s není pøipojeno"
#~ msgid "mount: going to mount %s by %s\n"
#~ msgstr "mount: chystám se pøipojit %s dle %s\n"
#~ msgid "UUID"
#~ msgstr "UUID"
#~ msgid "label"
#~ msgstr "popis"
#, fuzzy
#~ msgid "swapon: invalid loop device name\n"
#~ msgstr "umount: blokové zaøízení %s je chybné"
#, fuzzy
#~ msgid "swapon: unable to open loop device %s\n"
#~ msgstr "mount: chystám se pou¾ít zaøízení loop %s\n"
#, fuzzy
#~ msgid "swapon: loop device %s already in use\n"
#~ msgstr "Tento diskový oddíl je ji¾ pou¾íván."
#, fuzzy
#~ msgid "swapon: unable to open swap device %s\n"
#~ msgstr "odkládací prostor nelze pøevinout"
#, fuzzy
#~ msgid "swapon: unable to open /dev/urandom\n"
#~ msgstr "/dev/urandom nelze otevøít"
#, fuzzy
#~ msgid "swapon: unable to create pipe\n"
#~ msgstr "i-uzly nelze zapsat"
#, fuzzy
#~ msgid "swapon: fork failed\n"
#~ msgstr "volání fork selhalo\n"
#, fuzzy
#~ msgid "swapon: random password for %s is %s"
#~ msgstr "Mìním heslo u¾ivatele %s\n"
#~ msgid "umount: only root can unmount %s from %s"
#~ msgstr "unmount: pouze u¾ivatel root mù¾e odpojit %s ze %s"
#~ msgid "Partition %i does not end on cylinder boundary:\n"
#~ msgstr "Diskový oddíl %i nekonèí na hranici cylindru:\n"
#~ msgid ""
#~ "\n"
#~ "Disk %s: %d heads, %d sectors, %d cylinders\n"
#~ "Units = %s of %d * %d bytes\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "Disk %s: hlav: %d, sektorù: %d, cylindrù: %d\n"
#~ "Jednotky = %s po %d * %d bajtech\n"
#~ msgid "invalid number `%s'\n"
#~ msgstr "Chybné èíslo `%s'\n"
#~ msgid "number `%s' to `%s' out of range\n"
#~ msgstr "Èíslo `%s' na `%s'. Hodnota je mimo meze.\n"
#~ msgid "unrecognized option `%s'\n"
#~ msgstr "neznámý pøepínaè `%s'\n"
#~ msgid "option `%s' requires an argument\n"
#~ msgstr "pøepínaè `%s' vy¾aduje argument\n"
#~ msgid "option `%s' doesn't allow an argument\n"
#~ msgstr "pøepínaè `%s' musí být zadán bez argumentu\n"
#~ msgid "unrecognized option `-%c'\n"
#~ msgstr "neznámý pøepínaè `-%c'\n"
#~ msgid "%-10s %-10s %-10s %-10s %-10s %-12s\n"
#~ msgstr "%-10s %-10s %-10s %-10s %-10s %-12s\n"
#~ msgid "'\n"
#~ msgstr "'\n"
#, fuzzy
#~ msgid "The directory '"
#~ msgstr "Adresáø %s neexistuje!\n"
#~ msgid "not "
#~ msgstr "není "
#~ msgid "BSD/386"
#~ msgstr "BSD/386"
#~ msgid "cannot open %s %s\n"
#~ msgstr "%s %s nelze otevøít\n"
#~ msgid "read-write"
#~ msgstr "pro ètení/zápis"
#~ msgid "for reading"
#~ msgstr "pro ètení"
#~ msgid "new "
#~ msgstr "novou "
#~ msgid "The password must contain characters out of two of the following\n"
#~ msgstr "Heslo musí obsahovat znaky alespoò ze dvou z následující skupin:\n"
#~ msgid ""
#~ "classes: upper and lower case letters, digits and non alphanumeric\n"
#~ msgstr "velká nebo malá písmena, èíslice a nealfanumerické znaky.\n"
#~ msgid "characters. See passwd(1) for more information.\n"
#~ msgstr "Viz passwd(1) pro více informací.\n"
#~ msgid "rebooted"
#~ msgstr "restartován"
#~ msgid "halted"
#~ msgstr "vypnut"
#~ msgid "current"
#~ msgstr "aktuální"
#~ msgid "default"
#~ msgstr "implicitní"
#~ msgid "%s: %lu ints, %lu/%lu chars; "
#~ msgstr "%s: %lu pøeru¹ení, %lu/%lu znakù; "
#~ msgid "fifo: %lu thresh, %lu tmout, "
#~ msgstr "fifo: %lu práh, %lu èasový limit, "
#~ msgid "%lu max, %lu now\n"
#~ msgstr "%lu max, %lu nyní\n"
#~ msgid " which you have read access.\n"
#~ msgstr "je kterým máte pøístup pro ètení.\n"
#~ msgid "to file "
#~ msgstr "na soubor "
#~ msgid "usage: banner [-w width]\n"
#~ msgstr "Pou¾ití: banner [-w ¹íøka]\n"
#~ msgid "Message: "
#~ msgstr "Zpráva: "
#~ msgid "The character '%c' is not in my character set"
#~ msgstr "Znak '%c' není souèástí není souèástí mé sady znakù."
#~ msgid "Message '%s' is OK\n"
#~ msgstr "Zpráva '%s' je v poøádku\n"
#~ msgid "Warning: partition %d has an odd number of sectors.\n"
#~ msgstr "Varování: diskový oddíl %d má lichý poèet sektorù.\n"
#~ msgid ""
#~ "Re-read table failed with error %d: %s.\n"
#~ "Reboot your system to ensure the partition table is updated.\n"
#~ msgstr ""
#~ "Opìtovné naètení tabulky rozdìlení disku skonèilo s chybou %d: %s.\n"
#~ "Restartujte systém, aby tabulka byla zmìnìna.\n"