It some cases it makes sense to disable ECHO flag also when script
used in pipe. This new option allows to keep full control in user's
hands.
Signed-off-by: Karel Zak <kzak@redhat.com>
For tools like su(1) is ECHO flag unexpected for use-case like
echo 'date' | su - user
but script(1) need the echo to keep input recorded.
The patch also return execlp() use to script(1) code.
Signed-off-by: Karel Zak <kzak@redhat.com>
It's necessary to create signal-fd before fork() to get SIGCHLD,
because child could be faster than our code.
Signed-off-by: Karel Zak <kzak@redhat.com>
Now the code is duplicate on many places, but all we usually need is to
remember child status. It seems good enough to have very simple
callback child_die() to inform application about a change.
The patch also add PID to all signal related callbacks.
Signed-off-by: Karel Zak <kzak@redhat.com>
This patch consolidate pseudo-terminal stuff in util-linux. From now
there is only one implementation used in su(1) --pty, scriptlive(1)
and script(1).
The new stuff is based on the original script(1) -- it means poll()
and signalfd() based.
Note that script(1) code does not provide fallback for systems/libc
where is no openpty().
Signed-off-by: Karel Zak <kzak@redhat.com>
The new header/info lines in log uses 0, but it's unexpected by
scriptreplay as there was always number formatted by %f.
Signed-off-by: Karel Zak <kzak@redhat.com>
The old good scriptreplay(1) just display your recorded session, the
scriptlive(1) uses stdin typescript (from new script(1)) to execute
your commands again.
Signed-off-by: Karel Zak <kzak@redhat.com>
* add internal support for multiple log files
* add support for new timing file format (default is old format)
Signed-off-by: Karel Zak <kzak@redhat.com>
* allow to use --log-in <infile> and --log-out <outfile> in the same time
* add --log-io <file> to log stdout and stdin to the one log file
* introduce a new timing file format with entry type identifirs
I <delay> <size> : info about input stream
O <delay> <size> : info about output stream
in the next commits it's possible to add 'S' for signals and 'H' for
extra (header) information.
* the new file format is optional and enabled only if multiple streams
logging is requested.
Signed-off-by: Karel Zak <kzak@redhat.com>
Let's allow to log input independently on output. So it's possible to
script --log-in infile : logs only input
script --log-out outfile : logs only output
script --log-out outfile --log-in infile : logs both to separated files
Signed-off-by: Karel Zak <kzak@redhat.com>
The current -t[=<file>] is pretty messy due to optional <file>
argument; and default is to output to stderr. The default output to
stderr is very unusual semantic. This path makes the old -t
deprecated.
The new option -T, --log-timing requires the file name.
Signed-off-by: Karel Zak <kzak@redhat.com>
This commit does not add any new feature. It just prepare code for
future extensions only.
* introduce two new structs: script_stream and script_log
* define two streams: 'stdout' and 'stdin'
* allow associate log files (type script or timing file) with the stream
* support more log file formats
Signed-off-by: Karel Zak <kzak@redhat.com>
The current signalfd handler cares on CLD_EXITED only. It's pretty
insufficient as there is more situations (and codes) when child no
more running.
Addresses: https://github.com/karelzak/util-linux/issues/686
Signed-off-by: Karel Zak <kzak@redhat.com>
This patch introduces [...] to store extra information about terminal
to the typescript header. For example:
Script started on 2018-05-14 12:52:32+02:00 [TERM="xterm-256color" TTY="/dev/pts/3" COLS="190" LINES="53"]
or
Script started on 2018-05-14 12:54:01+02:00 [<not executed on terminal>]
if stdout is not terminal.
Addresses: https://github.com/karelzak/util-linux/issues/583
Signed-off-by: Karel Zak <kzak@redhat.com>
* always save "done" timestamp to typescript (use done() for this)
* use FORMAT_TIMESTAMP_MAX as buffer size
Signed-off-by: Karel Zak <kzak@redhat.com>
When script is used on a host with a relatively small free disk space, it
is sometimes desirable to limit the size of the captured output. This
can now be enforced with the --output-limit option.
The --output-limit option lets the user specify a maximum size. The program
uses the size parsing from strutils and thus supports the usual
multiplicative suffixes (kiB, KB, MiB, MB, etc.). After the specified
number of bytes have been written to the output file, the script program
will terminate the child process.
Due to buffering, the size of the output file might exceed the specified
limit. This limit also does not include the start and done messages.
The race test was throwing an error dur to a variable being "" in some cases.
Quoting the variable in the equal test took care of that test.
[kzak@redhat.com: - use done() to stop script
- count also timing file
- remove unnamed member initialization in ctl struct
- add to bash-completion]
Signed-off-by: Fred Mora <fmora@datto.com>
Signed-off-by: Karel Zak <kzak@redhat.com>
Let's make it possible to use debug.h without environment variables.
Suggested-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Karel Zak <kzak@redhat.com>
* Start the ISO format flags at bit 0 instead of bit 1.
* Remove unnecessary _8601 from ISO format flag names to
avoid line wrapping and to ease readability.
* ISO timestamps have date-time-timzone in common, so move
the TIMEZONE flag to bit 2 causing all timestamp masks
to have the first three bits set and the last four bits
as timestamp 'options'.
* Change the 'SPACE' flag to a 'T' flag, because it makes
the code and comments more concise.
* Add common ISO timestamp masks.
* Implement the ISO timestamp masks in all applicable code
using the strxxx_iso() functions.
Signed-off-by: J William Piggott <elseifthen@gmx.com>
* call wait() only when child exited
* suspend all session (including script master process) when child get
SIGSTOP and send SIGCONT to child when master process resume
This allows to suspend all session and later use "fg" shell command to
resume.
$ ps af
14722 pts/1 Ss 0:00 bash
4870 pts/1 S+ 0:00 \_ ./script
4871 pts/6 Ss+ 0:00 \_ bash -i
$ kill -SIGSTOP 4871
and script session on another terminal:
$ script
Script started, file is typescript
$
[1]+ Stopped ./script
$ fg 1
./script
... session again usable ...
^D
Script done, file is typescript
Signed-off-by: Karel Zak <kzak@redhat.com>
[kzak@redhat.com: - merge two patches from Antonio to the one,
- update the patch]
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Antonio Ospite <ao2@ao2.it>
changed in include/c.h and applied via sed:
sed -i 's/fprintf.*\(USAGE_MAN_TAIL.*\)/printf(\1/' $(git ls-files -- "*.c")
sed -i 's/print_usage_help_options\(.*\);/printf(USAGE_HELP_OPTIONS\1);/' $(git ls-files -- "*.c")
Signed-off-by: Ruediger Meier <ruediger.meier@ga-group.nl>
Now we are always using the same text also for commands
which had still hardcoded descriptions or where we can't
use the standard print_usage_help_options macro.
Signed-off-by: Ruediger Meier <ruediger.meier@ga-group.nl>
* 'usage-part2' of https://github.com/rudimeier/util-linux:
misc: cosmetics, remove argument from usage(FILE*)
misc: cosmetics, remove argument from usage(int)
misc: never use usage(stderr)
misc: never use usage(ERROR)
misc: cleanup and fix --unknownopt issues
flock, getopt: write --help to stdout and return 0
tools: add checkusage.sh
Karel Zak
Yuri Chornoivan
Sami Kerola
Ruediger Meier
Fred Mora
J William Piggott
Antonio Ospite