c094fcd37 introduced a behavior change: When Return is entered with empty
logname, nothing happens. As it confuses users, return back the old
behavior: re-prompt.
Signed-off-by: Stanislav Brabec <sbrabec@suse.cz>
When user starts to enter logname, 8b58ffdd blocks issue reloads.
Reloads remain blocked even if user deletes all typed characters.
Make things visually consistent: If no characters are entered,
re-enable reloads.
Signed-off-by: Stanislav Brabec <sbrabec@suse.cz>
Signed-off-by: Karel Zak <kzak@redhat.com>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
The wait_for_term_input()'s select() needs to be tripped when the user
starts typing. Otherwise the reloads can abort an already in-progress login.
Coupled with \4 and \6 expansions that happen to be there on Fedora Server,
this means reload on every netlink event. With a couple of IPv6 routers
announcing their networks and temporary addresses in use can make it
sometimes virtually impossible to log in.
Seems like zero lflags do the job just fine on a Linux VT. Reset it to
canonical mode before running login.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Stanislav Brabec <sbrabec@suse.cz>
Signed-off-by: Karel Zak <kzak@redhat.com>
If netlink event arrives and related escapes are part of issue, agetty
reloads and re-display the prompt. Reload is triggered not only by IP
address change, but also by IPv6 RAs. In some environments it causes
reload several times in a minute, and even complicates the login.
To prevent this, reload only if a real change appears.
This consists of:
split print_issue_file() to several functions:
eval_issue_file() prints issue to memory. It does not affect terminal in
any way.
print_issue_file() prints issue file from memory.
cmp_issue_file() compares the issue file and returns true, if reload is
needed.
The implementation requires additional change:
do_prompt() does not evaluate the issue file. It is responsibility of
calling function.
Test suite:
Use issue that contais \4 and/or \6 escape.
After installing new instance, restart agetty by typing a letter and then
Enter 6 times.
To check whether reload happens, type a letter. When reload happens,
letter disappears.
1. Unplug network cable. Wait a while and re-plug network cable.
You should see 2 reloads on single stack and 3 reloads on dual stack.
2. Run a loop
while : ; do
sed -i '$areload_test' /etc/issue
agetty --reload
sleep 3
sed -i '/reload_test/d' /etc/issue
agetty --reload
sleep 3
done
You should see regular reload every 3 seconds.
3. Run a loop
while : ; do
agetty --reload
sleep 3
done
Before: You see regular reload every 3 seconds.
After: No reloads.
4. Run a loop
while : ; do
ifconfig lo 127.0.0.1 netmask 255.0.0.0
sleep 3
ifconfig lo 127.0.0.2 netmask 255.0.0.0
sleep 3
done
Before: You see regular reload every 3 seconds.
After: No reloads.
Signed-off-by: Stanislav Brabec <sbrabec@suse.cz>
changed variable name is not correct. It does not say that network
interface changed its address. It just says that the netlink message
processing was triggered.
Signed-off-by: Stanislav Brabec <sbrabec@suse.cz>
man utmp:
String fields are terminated by a null byte ('\0') if they are shorter
than the size of the field.
Signed-off-by: Karel Zak <kzak@redhat.com>
The current signalfd handler cares on CLD_EXITED only. It's pretty
insufficient as there is more situations (and codes) when child no
more running.
Addresses: https://github.com/karelzak/util-linux/issues/686
Signed-off-by: Karel Zak <kzak@redhat.com>
Lots of people are confused why mesg(1) is priting this message. Usual
cause seems to be an uninteractive shell trying to turn running 'mesg n'
from a /root/.profile where command invocation is by default on debian based
systems. This might be rare case when failing silently is better.
[kzak@redhat.com: - add note to the man page
- fix if(isatty()) logic]
Reference: https://www.google.com/search?q=mesg+ttyname+failed
Review: https://marc.info/?l=util-linux-ng&m=153319988631233&w=2
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Signed-off-by: Karel Zak <kzak@redhat.com>
agetty sets c_iflags according to interaction with serial line in
get_logname(). For --autologin it does not read from the line, so we
have no clue how to set the flags.
The current behavior is to zeroize the flags. Unfortunately, it seems
like bad idea, because the line may be already properly initialized by
kernel (or systemd, etc.).
The new behavior is not touch the flags on --autologin.
Addresses: https://bugzilla.redhat.com/show_bug.cgi?id=1252764
Signed-off-by: Karel Zak <kzak@redhat.com>
Punctuation marks have been left in the only argument of two-fonts
macros, instead of being separated from it to make the second one.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Use the correct macro (I, B) for the font change of one argument, not
those that are used for alternating two fonts, like "BR", "IR", "RB",
or "RI".
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
This patch introduces [...] to store extra information about terminal
to the typescript header. For example:
Script started on 2018-05-14 12:52:32+02:00 [TERM="xterm-256color" TTY="/dev/pts/3" COLS="190" LINES="53"]
or
Script started on 2018-05-14 12:54:01+02:00 [<not executed on terminal>]
if stdout is not terminal.
Addresses: https://github.com/karelzak/util-linux/issues/583
Signed-off-by: Karel Zak <kzak@redhat.com>
* always save "done" timestamp to typescript (use done() for this)
* use FORMAT_TIMESTAMP_MAX as buffer size
Signed-off-by: Karel Zak <kzak@redhat.com>
When script is used on a host with a relatively small free disk space, it
is sometimes desirable to limit the size of the captured output. This
can now be enforced with the --output-limit option.
The --output-limit option lets the user specify a maximum size. The program
uses the size parsing from strutils and thus supports the usual
multiplicative suffixes (kiB, KB, MiB, MB, etc.). After the specified
number of bytes have been written to the output file, the script program
will terminate the child process.
Due to buffering, the size of the output file might exceed the specified
limit. This limit also does not include the start and done messages.
The race test was throwing an error dur to a variable being "" in some cases.
Quoting the variable in the equal test took care of that test.
[kzak@redhat.com: - use done() to stop script
- count also timing file
- remove unnamed member initialization in ctl struct
- add to bash-completion]
Signed-off-by: Fred Mora <fmora@datto.com>
Signed-off-by: Karel Zak <kzak@redhat.com>
Let's make it possible to use debug.h without environment variables.
Suggested-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Karel Zak <kzak@redhat.com>
get_logname() assumes that when it calls read() it initializes c and
errno, which isn't always true if we hit a whitelisted error or end of
file. This occasionally shows up as agetty going into an infinite
loop. Fix it by just delaying ten seconds and exiting when things go
wrong, similarly to the behavior after a non-whitelisted error.
[kzak@redhat.com: - interpret readres == 0 as c = 0
- ignore speed configurations for VCONSOLE]
Signed-off-by: Steven Smith <sos22@srcf.ucam.org>
Signed-off-by: Karel Zak <kzak@redhat.com>
* Start the ISO format flags at bit 0 instead of bit 1.
* Remove unnecessary _8601 from ISO format flag names to
avoid line wrapping and to ease readability.
* ISO timestamps have date-time-timzone in common, so move
the TIMEZONE flag to bit 2 causing all timestamp masks
to have the first three bits set and the last four bits
as timestamp 'options'.
* Change the 'SPACE' flag to a 'T' flag, because it makes
the code and comments more concise.
* Add common ISO timestamp masks.
* Implement the ISO timestamp masks in all applicable code
using the strxxx_iso() functions.
Signed-off-by: J William Piggott <elseifthen@gmx.com>
The /etc/issue file has been originally designed to inform users
about the system (version, name, etc.).
In last years is growing number of additional tools (containers,
maintenance tools and interfaces, ...) and many admins and downstream
maintainer want to add some tool specific hints to the issue file, but
it mess to share one file between more packages and/or scripts. The
solution is /etc/issue.d directory.
The directory is extension to the standard system /etc/issue. The
/etc/issue file has to exist, otherwise the directory will be ignored.
It means "rm /etc/issue" (or --onissue) is still the way how keep our
system silent independently on 3rd-party installed files in the
/etc/issue.d directory.
The content of the files in the directory are printed after content of
the /etc/issue. The files are printed in version-sort order and .issue
file extension is required (00-foo.issue 01-bar.issue ...).
The change is backwardly compatible.
Signed-off-by: Karel Zak <kzak@redhat.com>
For example /etc/os-release:
VERSION="26 (Twenty Six)"
VERSION_ID=26
agetty for \S{VERSION} returns
_ID=26
because the parser does nor check for '=' after variable name.
Addresses: https://bugzilla.redhat.com/show_bug.cgi?id=1498462
Signed-off-by: Karel Zak <kzak@redhat.com>
* call wait() only when child exited
* suspend all session (including script master process) when child get
SIGSTOP and send SIGCONT to child when master process resume
This allows to suspend all session and later use "fg" shell command to
resume.
$ ps af
14722 pts/1 Ss 0:00 bash
4870 pts/1 S+ 0:00 \_ ./script
4871 pts/6 Ss+ 0:00 \_ bash -i
$ kill -SIGSTOP 4871
and script session on another terminal:
$ script
Script started, file is typescript
$
[1]+ Stopped ./script
$ fg 1
./script
... session again usable ...
^D
Script done, file is typescript
Signed-off-by: Karel Zak <kzak@redhat.com>
This command has a lot of compile time #ifdef code. It is time to add
feature listing to --version output so understanding command behavior is
easier.
Proposed-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
There is no ./configure option to enable this, and it is unlikely any
distribution hot patching to enable fiddling when building package.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
[kzak@redhat.com: - merge two patches from Antonio to the one,
- update the patch]
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Antonio Ospite <ao2@ao2.it>
This script requires ncurses to work, and the ncurses provides reset so
there should not be need to keep this script hanging around.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
The current --skip-login implementation disables also issue file
printing. This is unexpected behavior as /etc/issue may contains
important information and we have --noissue for admins who don't want
it.
This patch forces /etc/issue printing if --noissue no specified.
Addresses: https://github.com/karelzak/util-linux/issues/480
Signed-off-by: Karel Zak <kzak@redhat.com>
changed in include/c.h and applied via sed:
sed -i 's/fprintf.*\(USAGE_MAN_TAIL.*\)/printf(\1/' $(git ls-files -- "*.c")
sed -i 's/print_usage_help_options\(.*\);/printf(USAGE_HELP_OPTIONS\1);/' $(git ls-files -- "*.c")
Signed-off-by: Ruediger Meier <ruediger.meier@ga-group.nl>
Now we are always using the same text also for commands
which had still hardcoded descriptions or where we can't
use the standard print_usage_help_options macro.
Signed-off-by: Ruediger Meier <ruediger.meier@ga-group.nl>
Consolidate --help and --version descriptions. We are
now able to align them to the other options.
We changed include/c.h. The rest of this patch was
generated by sed, plus manually setting the right
alignment numbers. We do not change anything but
white spaces in the --help output.
Signed-off-by: Ruediger Meier <ruediger.meier@ga-group.nl>
* 'usage-part2' of https://github.com/rudimeier/util-linux:
misc: cosmetics, remove argument from usage(FILE*)
misc: cosmetics, remove argument from usage(int)
misc: never use usage(stderr)
misc: never use usage(ERROR)
misc: cleanup and fix --unknownopt issues
flock, getopt: write --help to stdout and return 0
tools: add checkusage.sh
Stanislav Brabec
Christian Hesse
Samuel Thibault
Lubomir Rintel
Karel Zak
Bjarni Ingi Gislason
Sami Kerola
Ruediger Meier
Fred Mora
Steven Smith
J William Piggott
Antonio Ospite