util-linux/sys-utils/chmem.c

460 lines
12 KiB
C
Raw Normal View History

chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
/*
* chmem - Memory configuration tool
*
* Copyright IBM Corp. 2016
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <getopt.h>
#include <assert.h>
#include <dirent.h>
#include "c.h"
#include "nls.h"
#include "path.h"
#include "strutils.h"
#include "strv.h"
#include "optutils.h"
#include "closestream.h"
#include "xalloc.h"
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
/* partial success, otherwise we return regular EXIT_{SUCCESS,FAILURE} */
#define CHMEM_EXIT_SOMEOK 64
#define _PATH_SYS_MEMORY "/sys/devices/system/memory"
struct chmem_desc {
struct path_cxt *sysmem; /* _PATH_SYS_MEMORY handler */
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
struct dirent **dirs;
int ndirs;
uint64_t block_size;
uint64_t start;
uint64_t end;
uint64_t size;
unsigned int use_blocks : 1;
unsigned int is_size : 1;
unsigned int verbose : 1;
unsigned int have_zones : 1;
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
};
enum {
CMD_MEMORY_ENABLE = 0,
CMD_MEMORY_DISABLE,
CMD_NONE
};
enum zone_id {
ZONE_DMA = 0,
ZONE_DMA32,
ZONE_NORMAL,
ZONE_HIGHMEM,
ZONE_MOVABLE,
ZONE_DEVICE,
};
static char *zone_names[] = {
[ZONE_DMA] = "DMA",
[ZONE_DMA32] = "DMA32",
[ZONE_NORMAL] = "Normal",
[ZONE_HIGHMEM] = "Highmem",
[ZONE_MOVABLE] = "Movable",
[ZONE_DEVICE] = "Device",
};
/*
* name must be null-terminated
*/
static int zone_name_to_id(const char *name)
{
size_t i;
for (i = 0; i < ARRAY_SIZE(zone_names); i++) {
if (!strcasecmp(name, zone_names[i]))
return i;
}
return -1;
}
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
static void idxtostr(struct chmem_desc *desc, uint64_t idx, char *buf, size_t bufsz)
{
uint64_t start, end;
start = idx * desc->block_size;
end = start + desc->block_size - 1;
snprintf(buf, bufsz,
_("Memory Block %"PRIu64" (0x%016"PRIx64"-0x%016"PRIx64")"),
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
idx, start, end);
}
static int chmem_size(struct chmem_desc *desc, int enable, int zone_id)
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
{
char *name, *onoff, line[BUFSIZ], str[BUFSIZ];
uint64_t size, index;
const char *zn;
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
int i, rc;
size = desc->size;
onoff = enable ? "online" : "offline";
i = enable ? 0 : desc->ndirs - 1;
if (enable && zone_id >= 0) {
if (zone_id == ZONE_MOVABLE)
onoff = "online_movable";
else
onoff = "online_kernel";
}
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
for (; i >= 0 && i < desc->ndirs && size; i += enable ? 1 : -1) {
name = desc->dirs[i]->d_name;
index = strtou64_or_err(name + 6, _("Failed to parse index"));
if (ul_path_readf_buffer(desc->sysmem, line, sizeof(line), "%s/state", name) > 0
&& strncmp(onoff, line, 6) == 0)
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
continue;
if (desc->have_zones) {
ul_path_readf_buffer(desc->sysmem, line, sizeof(line), "%s/valid_zones", name);
if (zone_id >= 0) {
zn = zone_names[zone_id];
if (enable && !strcasestr(line, zn))
continue;
if (!enable && strncasecmp(line, zn, strlen(zn)) != 0)
continue;
} else if (enable) {
/* By default, use zone Movable for online, if valid */
if (strcasestr(line, zone_names[ZONE_MOVABLE]))
onoff = "online_movable";
else
onoff = "online";
}
}
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
idxtostr(desc, index, str, sizeof(str));
rc = ul_path_writef_string(desc->sysmem, onoff, "%s/state", name);
if (rc != 0 && desc->verbose) {
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
if (enable)
fprintf(stdout, _("%s enable failed\n"), str);
else
fprintf(stdout, _("%s disable failed\n"), str);
} else if (rc == 0 && desc->verbose) {
if (enable)
fprintf(stdout, _("%s enabled\n"), str);
else
fprintf(stdout, _("%s disabled\n"), str);
}
if (rc == 0)
size--;
}
if (size) {
uint64_t bytes;
char *sizestr;
bytes = (desc->size - size) * desc->block_size;
sizestr = size_to_human_string(SIZE_SUFFIX_1LETTER, bytes);
if (enable)
warnx(_("Could only enable %s of memory"), sizestr);
else
warnx(_("Could only disable %s of memory"), sizestr);
free(sizestr);
}
return size == 0 ? 0 : size == desc->size ? -1 : 1;
}
static int chmem_range(struct chmem_desc *desc, int enable, int zone_id)
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
{
char *name, *onoff, line[BUFSIZ], str[BUFSIZ];
uint64_t index, todo;
const char *zn;
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
int i, rc;
todo = desc->end - desc->start + 1;
onoff = enable ? "online" : "offline";
if (enable && zone_id >= 0) {
if (zone_id == ZONE_MOVABLE)
onoff = "online_movable";
else
onoff = "online_kernel";
}
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
for (i = 0; i < desc->ndirs; i++) {
name = desc->dirs[i]->d_name;
index = strtou64_or_err(name + 6, _("Failed to parse index"));
if (index < desc->start)
continue;
if (index > desc->end)
break;
idxtostr(desc, index, str, sizeof(str));
if (ul_path_readf_buffer(desc->sysmem, line, sizeof(line), "%s/state", name) > 0
&& strncmp(onoff, line, 6) == 0) {
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
if (desc->verbose && enable)
fprintf(stdout, _("%s already enabled\n"), str);
else if (desc->verbose && !enable)
fprintf(stdout, _("%s already disabled\n"), str);
todo--;
continue;
}
if (desc->have_zones) {
ul_path_readf_buffer(desc->sysmem, line, sizeof(line), "%s/valid_zones", name);
if (zone_id >= 0) {
zn = zone_names[zone_id];
if (enable && !strcasestr(line, zn)) {
warnx(_("%s enable failed: Zone mismatch"), str);
continue;
}
if (!enable && strncasecmp(line, zn, strlen(zn)) != 0) {
warnx(_("%s disable failed: Zone mismatch"), str);
continue;
}
} else if (enable) {
/* By default, use zone Movable for online, if valid */
if (strcasestr(line, zone_names[ZONE_MOVABLE]))
onoff = "online_movable";
else
onoff = "online";
}
}
rc = ul_path_writef_string(desc->sysmem, onoff, "%s/state", name);
if (rc != 0) {
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
if (enable)
warn(_("%s enable failed"), str);
else
warn(_("%s disable failed"), str);
} else if (desc->verbose) {
if (enable)
fprintf(stdout, _("%s enabled\n"), str);
else
fprintf(stdout, _("%s disabled\n"), str);
}
if (rc == 0)
todo--;
}
return todo == 0 ? 0 : todo == desc->end - desc->start + 1 ? -1 : 1;
}
static int filter(const struct dirent *de)
{
if (strncmp("memory", de->d_name, 6) != 0)
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
return 0;
return isdigit_string(de->d_name + 6);
}
static void read_info(struct chmem_desc *desc)
{
char line[128];
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
desc->ndirs = scandir(_PATH_SYS_MEMORY, &desc->dirs, filter, versionsort);
if (desc->ndirs <= 0)
goto fail;
ul_path_read_buffer(desc->sysmem, line, sizeof(line), "block_size_bytes");
errno = 0;
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
desc->block_size = strtoumax(line, NULL, 16);
if (errno)
goto fail;
return;
fail:
err(EXIT_FAILURE, _("Failed to read %s"), _PATH_SYS_MEMORY);
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
}
static void parse_single_param(struct chmem_desc *desc, char *str)
{
if (desc->use_blocks) {
desc->start = strtou64_or_err(str, _("Failed to parse block number"));
desc->end = desc->start;
return;
}
desc->is_size = 1;
desc->size = strtosize_or_err(str, _("Failed to parse size"));
if (isdigit(str[strlen(str) - 1]))
desc->size *= 1024*1024;
if (desc->size % desc->block_size) {
errx(EXIT_FAILURE, _("Size must be aligned to memory block size (%s)"),
size_to_human_string(SIZE_SUFFIX_1LETTER, desc->block_size));
}
desc->size /= desc->block_size;
}
static void parse_range_param(struct chmem_desc *desc, char *start, char *end)
{
if (desc->use_blocks) {
desc->start = strtou64_or_err(start, _("Failed to parse start"));
desc->end = strtou64_or_err(end, _("Failed to parse end"));
return;
}
if (strlen(start) < 2 || start[1] != 'x')
errx(EXIT_FAILURE, _("Invalid start address format: %s"), start);
if (strlen(end) < 2 || end[1] != 'x')
errx(EXIT_FAILURE, _("Invalid end address format: %s"), end);
desc->start = strtox64_or_err(start, _("Failed to parse start address"));
desc->end = strtox64_or_err(end, _("Failed to parse end address"));
if (desc->start % desc->block_size || (desc->end + 1) % desc->block_size) {
errx(EXIT_FAILURE,
_("Start address and (end address + 1) must be aligned to "
"memory block size (%s)"),
size_to_human_string(SIZE_SUFFIX_1LETTER, desc->block_size));
}
desc->start /= desc->block_size;
desc->end /= desc->block_size;
}
static void parse_parameter(struct chmem_desc *desc, char *param)
{
char **split;
split = strv_split(param, "-");
if (strv_length(split) > 2)
errx(EXIT_FAILURE, _("Invalid parameter: %s"), param);
if (strv_length(split) == 1)
parse_single_param(desc, split[0]);
else
parse_range_param(desc, split[0], split[1]);
strv_free(split);
if (desc->start > desc->end)
errx(EXIT_FAILURE, _("Invalid range: %s"), param);
}
static void __attribute__((__noreturn__)) usage(void)
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
{
FILE *out = stdout;
size_t i;
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
fputs(USAGE_HEADER, out);
fprintf(out, _(" %s [options] [SIZE|RANGE|BLOCKRANGE]\n"), program_invocation_short_name);
fputs(USAGE_SEPARATOR, out);
fputs(_("Set a particular size or range of memory online or offline.\n"), out);
fputs(USAGE_OPTIONS, out);
fputs(_(" -e, --enable enable memory\n"), out);
fputs(_(" -d, --disable disable memory\n"), out);
fputs(_(" -b, --blocks use memory blocks\n"), out);
fputs(_(" -z, --zone <name> select memory zone (see below)\n"), out);
fputs(_(" -v, --verbose verbose output\n"), out);
printf(USAGE_HELP_OPTIONS(20));
fputs(_("\nSupported zones:\n"), out);
for (i = 0; i < ARRAY_SIZE(zone_names); i++)
fprintf(out, " %s\n", zone_names[i]);
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
printf(USAGE_MAN_TAIL("chmem(8)"));
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
exit(EXIT_SUCCESS);
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
}
int main(int argc, char **argv)
{
struct chmem_desc _desc = { 0 }, *desc = &_desc;
int cmd = CMD_NONE, zone_id = -1;
char *zone = NULL;
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
int c, rc;
static const struct option longopts[] = {
{"block", no_argument, NULL, 'b'},
{"disable", no_argument, NULL, 'd'},
{"enable", no_argument, NULL, 'e'},
{"help", no_argument, NULL, 'h'},
{"verbose", no_argument, NULL, 'v'},
{"version", no_argument, NULL, 'V'},
{"zone", required_argument, NULL, 'z'},
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
{NULL, 0, NULL, 0}
};
static const ul_excl_t excl[] = { /* rows and cols in ASCII order */
{ 'd','e' },
{ 0 }
};
int excl_st[ARRAY_SIZE(excl)] = UL_EXCL_STATUS_INIT;
setlocale(LC_ALL, "");
bindtextdomain(PACKAGE, LOCALEDIR);
textdomain(PACKAGE);
close_stdout_atexit();
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
ul_path_init_debug();
desc->sysmem = ul_new_path(_PATH_SYS_MEMORY);
if (!desc->sysmem)
err(EXIT_FAILURE, _("failed to initialize %s handler"), _PATH_SYS_MEMORY);
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
read_info(desc);
while ((c = getopt_long(argc, argv, "bdehvVz:", longopts, NULL)) != -1) {
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
err_exclusive_options(c, longopts, excl, excl_st);
switch (c) {
case 'd':
cmd = CMD_MEMORY_DISABLE;
break;
case 'e':
cmd = CMD_MEMORY_ENABLE;
break;
case 'b':
desc->use_blocks = 1;
break;
case 'v':
desc->verbose = 1;
break;
case 'z':
zone = xstrdup(optarg);
break;
case 'h':
usage();
case 'V':
print_version(EXIT_SUCCESS);
default:
errtryhelp(EXIT_FAILURE);
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
}
}
if ((argc == 1) || (argc != optind + 1) || (cmd == CMD_NONE)) {
warnx(_("bad usage"));
errtryhelp(EXIT_FAILURE);
}
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
parse_parameter(desc, argv[optind]);
/* The valid_zones sysfs attribute was introduced with kernel 3.18 */
if (ul_path_access(desc->sysmem, F_OK, "memory0/valid_zones") == 0)
desc->have_zones = 1;
else if (zone)
warnx(_("zone ignored, no valid_zones sysfs attribute present"));
if (zone && desc->have_zones) {
zone_id = zone_name_to_id(zone);
if (zone_id == -1) {
warnx(_("unknown memory zone: %s"), zone);
errtryhelp(EXIT_FAILURE);
}
}
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
if (desc->is_size)
rc = chmem_size(desc, cmd == CMD_MEMORY_ENABLE ? 1 : 0, zone_id);
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
else
rc = chmem_range(desc, cmd == CMD_MEMORY_ENABLE ? 1 : 0, zone_id);
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
ul_unref_path(desc->sysmem);
chmem: new tool Move the s390 specific chmem tool to util-linux. The chmem tool was originally written in perl and is part of the s390-tools package which can be found here: https://www.ibm.com/developerworks/linux/linux390/s390-tools.html Given that the tool is architecture independent, there is no reason to keep it in an s390 specific repository. It seems to be useful for other architectures as well. This patch converts the tool to C and adds it to util-linux, while the command line options stay compatible. The only exception is the option "-v" which used to be the short form of "--version". That got changed to "-V" so it behaves like most other tools contained within util-linux. The chmem tool can be used to set memory online or offline. This can be achieved by specifying a memory range: Memory Block 19 (0x0000000130000000-0x000000013fffffff) disabled or by specifying a size where chmem will automatically select memory blocks: Memory Block 21 (0x0000000150000000-0x000000015fffffff) disable failed Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled or by specifying memory block numbers instead of address ranges: Memory Block 15 (0x00000000f0000000-0x00000000ffffffff) disabled Memory Block 16 (0x0000000100000000-0x000000010fffffff) disabled Memory Block 17 (0x0000000110000000-0x000000011fffffff) disabled Memory Block 18 (0x0000000120000000-0x000000012fffffff) disabled This is based on a patch from Clemens von Mann. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2016-10-12 07:00:46 -05:00
return rc == 0 ? EXIT_SUCCESS :
rc < 0 ? EXIT_FAILURE : CHMEM_EXIT_SOMEOK;
}